Catalogo Cameron BOPs | Industries | Mechanical Engineering

BOP Replacement Parts Catalog

Cameron Total Drilling Systems

Riser System

Stack System

SD5211-96

 

SD11600-96

Cameron Land Drilling System

Cameron Subsea Drilling System

Cameron has a focused drilling organization which is dedicated to meeting the changing needs of our customers. One of the ways we accomplish this is by providing total systems for land and subsea drilling including BOP stacks, complete choke manifold systems, riser systems and high technology control systems.

designed and manufactured to provide safety, reliability and convenience to the operator.

BOP Stack Systems Cameron ram-type BOPs, annular BOPs and gate valves can meet the most basic land drilling needs as well as critical, weight sensitive, harsh environmental platform requirements. Components in Cameron’s Cameron’s subsea BOP stack systems, ram-type BOPs, annular BOPs, gate valves and BOP stack structures incorporate years of field-proven technology and reliability. Choke Manifold Systems Cameron supplies all necessary components for a choke manifold including manual and hydraulic chokes, and H2 chokes, J-2 transmitters, pressure gauges, check valves, buffer tanks and all connecting equipment required to assemble the choke manifold. All Cameron choke manifold equipment is

Riser Systems Cameron riser system components, spider/gimbal, telescoping joint, RST ring, fill-up valve, RF and RD riser joints, termination spool and flex joint are designed to meet the stringent requirements for drilling in deep water. Control Systems Cameron offers a complete hydraulic control system as well as a multiplex control system for subsea drilling applications. Cameron supplies all the components required for choke control systems as well as all of the components used to control the BOP stack and associated equipment. For land applications, Cameron’s pump accumulator unit and remote control panels are designed to customer specifications. All of our components offer fieldproven reliability and high quality, dependable components. For more information on complete Cameron drilling systems, contact your local Cameron representative or visit our web site (http//camerondiv.com).

Cameron Total Drilling Systems

Riser System

Stack System

SD5211-96

 

SD11600-96

Cameron Land Drilling System

Cameron Subsea Drilling System

Cameron has a focused drilling organization which is dedicated to meeting the changing needs of our customers. One of the ways we accomplish this is by providing total systems for land and subsea drilling including BOP stacks, complete choke manifold systems, riser systems and high technology control systems.

designed and manufactured to provide safety, reliability and convenience to the operator.

BOP Stack Systems Cameron ram-type BOPs, annular BOPs and gate valves can meet the most basic land drilling needs as well as critical, weight sensitive, harsh environmental platform requirements. Components in Cameron’s Cameron’s subsea BOP stack systems, ram-type BOPs, annular BOPs, gate valves and BOP stack structures incorporate years of field-proven technology and reliability. Choke Manifold Systems Cameron supplies all necessary components for a choke manifold including manual and hydraulic chokes, and H2 chokes, J-2 transmitters, pressure gauges, check valves, buffer tanks and all connecting equipment required to assemble the choke manifold. All Cameron choke manifold equipment is

Riser Systems Cameron riser system components, spider/gimbal, telescoping joint, RST ring, fill-up valve, RF and RD riser joints, termination spool and flex joint are designed to meet the stringent requirements for drilling in deep water. Control Systems Cameron offers a complete hydraulic control system as well as a multiplex control system for subsea drilling applications. Cameron supplies all the components required for choke control systems as well as all of the components used to control the BOP stack and associated equipment. For land applications, Cameron’s pump accumulator unit and remote control panels are designed to customer specifications. All of our components offer fieldproven reliability and high quality, dependable components. For more information on complete Cameron drilling systems, contact your local Cameron representative or visit our web site (http//camerondiv.com).

Cameron BOP Re Rep pla lacem cement ent Pa Parts Catal Catalog Cameron provides all of the OEM products and services necessary necessary to maintain the full range range of Cameron drilling products. products. This catalog contains information on our worldwide network of aftermarket facilities as well as detailed information on the replacement parts necessary for the following Cameron products:

U BOP

TL BO BOP P

DL Annu Annular lar BOP

UIII BO UI BOP P

UL BO BOP P

S/QRC S/QR C Snub Snubbing bing BOP BOP

T BOP

D Ann Annul ular ar BOP BOP

G-2 Snubbing BOP

The Cameron BOP Replacement Parts Catalog, Catalog, along with the 1996-1997 1996-1997 Cameron General Catalog, Catalog, is also available on CD ROM. The electronic version of the catalog provides provides easy-to-use, interactive interactive information on all Cameron products. products. The CD ROM is compatible with MacIntosh and Windows 3.1 and Windows 95 systems. To obtain a copy the CD ROM, contact your Cameron representative or follow the “How to Order” instructions below.

How to Order the Cameron General Catalog: By Fax:

(713) 939-2735

By Mail:

Cameron Technical Communications P.O. Box 1212 Houston TX 77251-1212

Request TC1179 Cameron 1996 - 1997 1997 Cameron Catalog CD ROM Be sure to submit your request on company letterhead and include your name, title, company name, full address, telephone number, fax number and number of copies of the CD required. For additional information on Cameron products, be sure to visit our web site (http://www.cameron div.com).

1

Contents Page

Page

Cameron Aftermarket Capabilities . . . . . . . . . . . . . . . . . . . . . . . . 3 Total Vendor Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Spare Parts Inventory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 RGR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 BOP Exchange Program. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Cameron Aftermarket Facilities . . . . . . . . . . . . . . . . . . . . . . . 4 Western Hemisphere . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Patterson, Louisiana, USA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Liberty, Texas, USA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Anchorage, Alaska, USA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Oklahoma CIty, Oklahoma, USA. . . . . . . . . . . . . . . . . . . . . . . . . . 4 Veracruz, Mexico . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Zarate, Argentina . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Edmonton, Alberta, Canada . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Eastern Hemisphere . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Aberdeen, Scotland . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Stavanger, Norway . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Hoogezand, The Netherlands . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Port Harcourt, Nigeria . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Asia Pacific and Middle East . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Singapore. Republic of Singapore . . . . . . . . . . . . . . . . . . . . . . . . 5 Melbourne, Victoria, Australia . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Cameron Elastomer Technology . . . . . . . . . . . . . . . . . . . . . . . . . . 6 CAMRAM Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 CAMRAM FAtigue Testing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 CAMRAM 350 Products. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 CAMRAM 350 Field Testing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 CAMRAM Lipped Plate Design . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Rams for Ram-Type Blowout Preventers . . . . . . . . . . . . . . . . . 10 Comparison of Cameron Ram-Type Blowout Preventers . . . . 11 U BOP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 U BOP Hydraulic Control System. . . . . . . . . . . . . . . . . . . . . . . . . . 13 U BOP Specifications and Accessories. . . . . . . . . . . . . . . . . . . . . . 14 U BOP Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 U BOP Part Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 7-1/16” 3000 - 11” 10,000 psi WP . . . . . . . . . . . . . . . . . . . . . . 16 11” 15,000 - 16-3/4” 5000 psi WP . . . . . . . . . . . . . . . . . . . . . . 17 16-3/4” 10,000 - 26-3/4” 3000 psi WP . . . . . . . . . . . . . . . . . . 18 Large Bore Shear Bonnets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Tandem Boosters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 U and U II BOP Ram Hang-Off Weights . . . . . . . . . . . . . . . . . . . . . 20 Drill Pipe Shearing Requirements . . . . . . . . . . . . . . . . . . . . . . . . . 20 U BOP Pipe Rams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 7-1/16” - 13-5/8” 10,000 psi WP . . . . . . . . . . . . . . . . . . . . . . . 21 13-5/8” 15,000 - 26-3/4” 2000 and 3000 psi WP . . . . . . . . . . . 22 U BOP Shearing Blind Rams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 U BOP DSI and DVS Rams. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 U BOP Variable Bore Rams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 FLEXPACKERS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 CAMRAM 350™ Packers and Top Seals . . . . . . . . . . . . . . . . . . . . 25 U BOP Rams for Multiple Completions . . . . . . . . . . . . . . . . . . . . . 26 Bonnet Rebuild Softgoods Kits for U BOP . . . . . . . . . . . . . . . . . . . 26 Hydraulic Bonnet Bolt System . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Bonnet Seals, and Connecting Rod Seals. . . . . . . . . . . . . . . . . . . . 27 Bonnet Seal Carriers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

U II BOP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 U II BOP Hydraulic Control System . . . . . . . . . . . . . . . . . . . . . . . . 29 U II Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 U II BOP Part Numbers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 U II BOP Pipe Rams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 U II BOP Variable Bore Rams . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 U II BOP Shearing Blind Rams. . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 CAMRAM 350 Packers and Top Seals for U II BOPs . . . . . . . . . . . 32 T BOP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 T BOP Hydraulic Control System . . . . . . . . . . . . . . . . . . . . . . . . . . 34 T BOP Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 T BOP Dimensions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 T BOP Part Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 13-5/8” 10,000 psi WP Components. . . . . . . . . . . . . . . . . . . . . 36 13-5/8” 10,000 psi WP Bonnet Subassembly . . . . . . . . . . . . . . 37 18-3/4” 15,000 psi WP Components. . . . . . . . . . . . . . . . . . . . . 38 18-3/4” 15,000 psi WP Bonnet Subassembly. . . . . . . . . . . . . . 39 T BOP Pipe Rams. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 T BOP CAMRAM 350 Packers and Top Seals for T BOP . . . . . . . . 40 T BOP Shearing Blind Rams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 T BOP Variable Bore Rams. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 TL BOP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 TL BOP Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 TL BOP Dimensions, Weights and Components . . . . . . . . 43 UL BOP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 UL BOP Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 UM BOP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 DL BOP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 D and DL Annular BOP Dimensions, Weights and Components . . 47 D and DL Annular BOP Part Numbers . . . . . . . . . . . . . . . . . . . . . . 48 7-1/16” 3000 - 11” 15,000 psi WP . . . . . . . . . . . . . . . . . . . . . . 48 13-5/8” - 21-1/4” 2000 psi WP . . . . . . . . . . . . . . . . . . . . . . . . . 49 D and DL Annular BOP Replacement Part Kits . . . . . . . . . . . . . . . . 50 S/QRC and G-2 Snubbing/Workover BOPs . . . . . . . . . . . . . . 51 S/QRC and G-2 BOP Rams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 Clamp Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 Manufacturing and Aftermarket Locations (Addresses, Telephone and Fax Numbers) Western Hemisphere . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 Eastern Hemisphere. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 Asia Pacific . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 4 Middle East . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 4 Sales Offices (Addresses, Telephone and Fax Numbers) Western Hemisphere . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 Eastern Hemisphere. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 Asia Pacific . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 6 Middle East . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 6

CAMRAM, CAMRAM 350, CAMULAR, CAMLAST and FLEXPACKER are trademarks of Cooper Cameron Corporation

2

Cameron Aftermarket Capabilities In any area of the world where Cameron drilling products are used, Cameron aftermarket and repair facilities are ready to r espond with the most comprehensive network of aftermarket products and services available in the industry. Each of our facilities is strategically located to meet the exact needs of the customers in the area. Yet all of the facilities benefit from our expertise and worldwide communications network which links all facilities through an electronic communication system and ensures instantaneous access to information. Cameron aftermarket services include: total vendor management (TVM), spare parts inventory, repair refurbishment (RGR), BOP exchange program, field service

TVM is not just a repair program, It is a comprehensive package of services to the drilling contractor. Through TVM, Cameron customers have a way to drive down drilling costs and be more competitive. In addition, TVM provides the customer with a single point of contact for equipment sales, repair and remanufacturing and exchange.

Spare Parts Inventory Cameron is committed to providing off-the-shelf delivery of spare parts in any location worldwide. By using genuine Cameron replacement parts, customers are guaranteed to receive the same quality and performance as when the product was new. To meet these needs, Cameron has established four worldwide stocking locations to better meet delivery requirements. Elastomers and frequently requested metal components are stocked in a temperaturecontrolled warehouse in Katy, Texas; Aberdeen, Scotland; Singapore and Abu Dhabi.

Total Vendor Management The TVM concept reflects a new relationship between equipment suppliers and drilling contractors by making cost efficiency of primary importance to both sides. The traditional seller-buyer adversarial roles are eliminated, in effect making the customer and supplier partners in cutting costs. Cameron understands this process and has more experience in successful TVM programs than anyone else in the industry. With the development of this type of long-term agreement, Cameron and the customer work together to reduce the costs associated with the design, manufacture, delivery, installation and operation of equipment required for the drilling project. TVM contract options may include: • New equipment manufacture. • Field maintenance. • Off-the-shelf delivery of spare and replacement parts. • Repair and refurbishment of used and worn equipment. • Used equipment exchange program • Re-manufactured products • Inventory management and storage of customer property.

RGR Cameron’s focus on aftermarket services includes a complete RGR program. Cameron will repair equipment to customer specifications - fit for purpose, with a reasonable price and quick delivery. Cameron’s RGR goal is to receive the equipment and do whatever is necessary to get it back in the field as quickly as possible. In addition, Cameron has embarked on a detailed engineering study to take as much time and money out of our RGR processes as possible while still maintaining the quality customers expect from Cameron drilling products. Cameron’s RGR program also includes the option of retrofitting BOPs with some of the features of more current BOP designs such as bonnet seal carriers, large bore shear ram bonnets and tandem boosters.

BOP Exchange Program For those customers looking for an economical alternative to buying new equipment or in situations where a BOP cannot be removed from service for the time required to make the repair, Cameron offers a BOP exchange program. For this program, Cameron maintains an inventory of remanufactured BOPs that met API 6A, 14th edition NACE MR-01-75 restored to like-new condition with a full one-year warranty. Customers can trade their used BOPs in exchange for a remanufactured BOP. Cameron also offers remanufactured BOPs for sale without an exchange.

Remanufactured BOPs and BOP Accessories Availability Chart Bore Size

A BOP body is refurbished at Cameron’s Stavanger, Norway facility 3

Working Pressure

7-1/16”

5000

7-1/16”

10,000

11”

5000

11”

10,000

11”

15,000

13-5/8”

5000

13-5/8”

10,000

16-3/4”

5000

16-3/4”

10,000

18-3/4”

15,000

18-3/4”

10,000

20-3/4”

3000

BOPs

• • • • • • • • • • • •

Large Bore Shear Bonnets

Rams

Tandem Boosters

• •

• • • •

––

––

––

• •

•

––

• • •

––

––

––

––

• • •

––

(Small Bore) ––

––

•

–– ––

• ––

–– ––

–– ––

Bonnet Seal Carrier

• • • • • • • • • • • •

Western Hemisphere Aftermarket Locations

Patterson, Louisiana, USA Dedicated aftermarket facility with manufacturing support. Services include: Assembly, Marine Stack and Tree Assembly, Hydro Testing, Gas Testing, Welding, Cladding, Post Weld Heat Treat, Machining, Inspection, Blast and Paint, Customer Property Storage.

Liberty, Texas, USA Dedicated aftermarket facility with manufacturing support. Services include: Assembly, Hydro Testing, Gas Testing, Welding, Cladding, Post Weld Heat Treat, Machining, Inspection, Blast and Paint, Customer Property Storage.

Anchorage, Alaska, USA Dedicated aftermarket facility with manufacturing support. Services include: Assembly, Hydro Testing, Welding, Post Weld Heat Treat, Machining, Inspection, Blast and Paint, Customer Property Storage.

Oklahoma City, Oklahoma, USA Field service warehouse performing product repair/remanufacture outside the scope of typical field service repairs. Services include: Assembly, Hydro Testing, Gas Testing, Welding, Post Weld Heat Treat, Machining, Blast and Paint, Customer Property Storage.

Veracruz, Mexico Dedicated aftermarket facility with manufacturing support. Services include: Assembly, Hydro Testing, Welding, Post Weld Heat Treat, Inhouse Heat Treat, Machining, Inspection, Blast and Paint, Customer Property Storage.

Zárate, Argentina Dedicated manufacturing facility with aftermarket support. Services include: Assembly, Hydro Testing, Gas Testing, Welding, Post Weld Heat Treat, Inhouse Heat Treat, Machining, Inspection, Blast and Paint, Customer Property Storage.

Edmonton, Alberta, Canada Dedicated manufacturing facility with aftermarket support. Services include: Assembly, Hydro Testing, Welding, Post Weld Heat Treat, Machining, Inspection, Blast and Paint, Customer Property Storage.

4

Eastern Hemisphere Aftermarket Locations

Aberdeen, Scotland Dedicated aftermarket facility with manufacturing support. Services include: Assembly, Marine Stack and Tree Assembly, Hydro Testing, Gas Testing, Welding, Cladding, Post Weld Heat Treat, Machining, Inspection, Blast and Paint, Customer Property Storage.

Stavanger, Norway Dedicated aftermarket facility with manufacturing support. Services include:Assembly, Marine Stack and Tree Assembly, Hydro Testing, Gas Testing, Welding, Cladding, Post Weld Heat Treat, Machining, Inspection, Blast and Paint, Customer Property Storage.

Hoogezand, The Netherlands Field service warehouse performing product repair/remanufacture outside the scope of typical field service repairs. Services include: Assembly, Hydro Testing, Inspection, Blast and Paint, Customer Property Storage.

Port Harcourt, Nigeria Field service warehouse performing product repair/remanufacture outside the scope of typical field service repairs. Services include: Assembly, Hydro Testing, Inspection, Gas Testing, Blast and Paint, Customer Property Storage.

Asia Pacific and Middle East Aftermarket Locations

Singapore, Republic of Singapore Dedicated manufacturing facility with aftermarket support. Services include: Assembly, Hydro Testing, Gas Testing, Welding, Cladding, Post Weld Heat Treat, Inhouse Heat Treat, Machining, Inspection, Blast and Paint, Customer Property Storage.

Melbourne, Victoria, Australia Field service warehouse performing product repair/remanufacture outside the scope of typical field service repairs. Services include: Assembly Marine Trees, Hydro Testing, Gas Testing, Welding, Stress Relieve, Wet Test Pit, Machining, Inspection, Blast and Paint, Customer Property Storage.

5

Cameron Elastomer Technology From its Katy facility west of Houston, Texas, Cameron Elastomer Technology provides engineered solutions to elastomeric material problems. State-of-the-art research, including associated mechanical design and engineering, is conducted at this totally integrated manufacturing facility. The 72,000-sq-ft plant is designed to support Cameron Division's elastomer components and develop new products to meet the most stringent operating and environmental conditions. Cameron Elastomer Technology (CET) has extensive process development capability supported by continuing research, a comprehensive testing laboratory and engineering capability. These are combined to provide effective support for the manufacturing of an extensive line of high-performance elastomer products. CET offers molded products utilizing compression, transfer and injection molding techniques. Critical molded products are qualification-tested prior to release for production. Cold chambers and ovens are available for testing elastomers in temperature extremes ranging from -150°F to 700°F. Precise temperature control allows for exposure of elastomer components to conditions that simulate the actual service environment.

CET's facilities provide "life prediction" and immersion testing. The lifeprediction testing is based on the Arrhenius principle of thermochemical reactions. Elevated temperatures are used to accelerate the thermochemical degradation of elastomer materials. Cameron employees are experts in elastomer technology and can take an idea from the testing phase through full product development. Today, there is a family of elastomer products specially formulated and designed to meet the rigorous demands of the oilfield. These products, when used in Cameron T, U II, and U ram and D annular BOPs, improve performance, extend service life, reduce downtime, and lower operating costs. CAMRAM™, CAMRAM 350™, CAMULAR™ and CAMLAST™ elastomers have set new standards in performance. Each is uniquely Cameron, including design and manufacturing. Behind each product is the absolute commitment to quality, performance and support that the industry has come to recognize as hallmarks of Cameron. An integral part of CET’s Katy facility is a temperature controlled elastomer warehouse. CET manufactured elastomer products and critical drilling metal spares are readily available to meet customer requirements.

 

SD-10810-96

Special equipment performs high temperature evaluation of ram packers.

SD-10861-96

The CET facility produces a wide variety of elastomers components.

SD-10813-96

SD-24101-96

Cameron Elastomer Technology plant, Katy, Texas

A ram-type packer is removed from an injection molding press.

6

CAMRAM Products • Diesel Mud Resistant

CAMRAM packers and top seals are designed specifically for Cameron ram BOPs. These new elastomer products from Cameron Elastomer Technology last longer and provide increased margins of safety in severe drilling environments than do look-alike replacement parts. That’s under all conditions — high temperatures, diesel mud and heavy stripping. CAMRAM long-life packers mean fewer problems, less downtime and better overall performance.

CAMRAM packers provide high resistance to diesel drilling muds. In field service, CAMRAM packers have performed as well in high-temperature mud conditions as conventional packers perform dry at room temperature.

• Superior Stripping/Snubbing Performance The superior elastomer material, in combination with the lipped-plate design, reduce seal extrusion and wear in stripping and snubbing service. In fact, CAMRAM packers have demonstrated a stripping capability at least three times greater than conventional packers.

CAMRAM Characteristics • Higher Temperature Capability

• Extreme High Temperature Capability

CAMRAM packers made with high-temperature nitrile rubber provide a 50°F increase in the service temperature of the BOP in which they are used. CAMRAM packers have proven successful in 250°F sustained service and have withstood excursions to 300°F.

For applications which require higher temperature capabilities than standard CAMRAM packers, Cameron Elastomer Technology has developed CAMRAM 350 packers and top seals which are made of CAMLAST. CAMRAM 350 packers and top seals operate up to 350°F. They can be

Why CAMRAM’s Rubber Performs Better Than Conventional Packer Rubber 300%

300% 270

CAMRAM Packer Rubber

CAMRAM Packer Rubber

250

Conventional Packer Rubber

   t    n    e    m    e    v    o    r    p    m     I

200

200%

200

170

110 100%

0%

100

100

70°F 300°F Tensile Strength

100

Elongation

100

Tear Strength

100

Abrasion Resistance

   s    e     i    t    r    e    p    o    r     P     d    e    n     i    a    t    e     R

Conventional Packer Rubber

200%

190

130 100%

0%

100

Tensile Strength

100

Elongation

100

Rubber Hardness

Mechanical Properties 70 Hours in 300°F Diesel Fluid

Original Mechanical Properties

7

CAMRAM: Fatigue Tests Prove Performance CAMRAM has demonstrated its superior performance in a tough series of fatigue tests conducted during the development phase. In actual field applications, these test results have been confirmed time after time.

Fatigue Test Conditions Test Temperature Fluid Pressure Minimum Acceptable Life

Condition 250°F Mineral-based Hydraulic Oil 10,000 psi 50 Closure and Pressure Cycles at 250°F without Leakage Fatigue Test Results

Result Cycles Completed

CAMRAM 50

Packer Condition

Brand A* 1

Brand B* 50

Brand C* 9

Passed Pressure Failed, Passed Failed, Would Test - OK for Would Not Pressure Test, Not Hold Continued Use Hold Pressure Failure Imminent Pressure

Seal Area/Material Loss

5%

90%

25%

CAMRAM

40%

Brand A

Brand B

Brand C SD-10872-96

Ram Packers after Fatigue Test at 250°F

*Brands A, B and C are non-Cameron replacement (bootleg) packers.

CAMRAM: Outperforms in Stripping Service Stripping Test Conditions Because Cameron Elastomer Technology understands that stripping service is one of the toughest tests elastomer packers see in field service, CAMRAM packers were subjected to extensive laboratory stripping tests. The results proved CAMRAM far superior to non-Cameron replacement packers. And, in the field, where performance is the true test of the product, CAMRAM has consistently outperformed other packers.

Condition Test Temperature Test Fluid Bore Pressure Drill Pipe Size Stripping Rate

Parameter 120°F Water 1500 psi 5" 20 feet per minute

Stripping Test Results

CAMRAM

47,928

Brand A*

11,980

Brand B*

15,638

Brand C*

2,366

Brand D*

14,168

Brand E*

1,687 0

10

20

30

Feet of Drill Pipe Stripped (x 1000) *Brands A, B, C, D and E are no n-Cameron replacement (bootleg) packers.

8

40

50

CAMRAM 350 Products CAMRAM 350 packers and top seals are made with CAMLAST™ high performance elastomer available exclusively from Cameron Elastomer Technology. In addition, CAMRAM 350 packers have a patented lipped top and bottom plate design for increased service life. In addition, anti-extrusion wings have been added to the end of the packer plates to reduce elastomer extrusion at elevated temperatures. Benefits of CAMRAM 350 include:

• CAMRAM 350 packers and top seals have been in field use since 1985 when they were first used in Puckett, Mississippi to control a gas well blowout. SInce then, CAMRAM 350 components have continued to prove reliable and rugged in field service applications. The CAMRAM 350 logo molded into all CAMLAST packers and top seals ensures a genuine quality part from Cameron Elastomer Technology.

• CAMRAM 350 packers and top seals operate up to 350° F. Standard CAMRAM packers operate at temperature up to 250° F which is at least 50° F higher than non-OEM packers and top seals. • CAMRAM 350 packers and top seals can operate in H 2S (hydrogen sulfide) concentrations up to 20% without detrimental effects to CAMLAST elastomer performance. • CAMRAM 350 is available for all Cameron ram-type BOPs in which standard CAMRAM is available. It is not an "off-the-shelf" item, but is readily available on short notice special orders from Cameron Elastomer Technology. • CAMRAM 350 packers and top seals are more expensive than standard CAMRAM packers and top seals. However, this is a small price to pay for the level of performance offered by CAMRAM 350 components in critical applications.

CAMRAM 350 Packer

CAMRAM 350 Packers and Top Seals Shut-In Well after 43 Days of Exposure to H2S

In actual field test conditions, the CAMRAM 350 16-3/4” x 5-1/2” 5000 psi pipe ram packers and top seals pictured at right, were successfully used to shut-in a gas well after exposure to natural gas containing 35% H 2S at temperatures of 190° for 43 days. The components show negligible damage after exposure to the severe conditions experienced in controlling the blowout. CAMRAM 350 packers and top seals are m ade with CAMLAST™ elastomer and are intended for use to 350°F in high H 2S concentrations and with water and/or diesel based drilling mud. CAMLAST elastomer is a proprietary material made only by Cameron Elastomer Technology in Katy, Texas. CAMRAM 350 packers and top seals are available on a special order basis only. For applicable part numbers and availability, please contact your local Cameron representative or the Cameron Elastomer warehouse at (281) 391-4644.

Location Flowline Temperature Number of Days Used Concentration of H2S

CAMRAM 350 16 3 / 4” top seal after exposure

Rankin County, Mississippi 190°F 43 Days 35%

CAMRAM35016 3 / 4” x 5 3 / 4”packer after exposure 9

CAMRAM Lipped Plate Design Cameron Elastomer Technology's elastomer experts have integrated a superior elastomer compound into an exclusive lipped-plate packer design that produces "rubber in compression" at the sealing surface. The design is a Cameron exclusive and gives the packers improved sealing capabilities and extended service life.

Because rubber performs best when it is under compression, Cameron's lipped-plate design provides "rubber in compression" at the wearing surface to enhance the elastomer mechanical properties as well as the seal. The lipped plate is unique because it provides stiffness in the wear direction, yet allows ample feed to the compressed rubber.

Upper Plate       

Upper Plate       

      

Lower Plate

Wearing Surface

SD-7395

CAMRAM Lipped-Plate Design

Lower Plate

Rubber in Compression

Rams for Ram-Type Blowout Preventers

Cameron offers the most comprehensive line of rams in the industry for its BOPs including pipe rams, shearing blind rams, and variable bore rams. A selection of dual string rams are also available to fit specific preventers. Cameron also offers high quality elastomer products for its rams through

Cameron Elastomer Technology (CET) including high performance products such as CAMRAM™ and CAMRAM 350™ elastomers for high temperature applications. These elastomer products are available to fit Cameron BOPs and are standard in some models and sizes.

Ram Availability Chart Description

TL BOP

T BOP

U BOP

U II BOP

Yes

Yes

Yes

Yes

Yes

Variable Bore Rams Available

In Some BOP Sizes

Yes

Yes

Yes

Yes

FLEXPACKER Rams Available

In Some BOP Sizes

No

In Some BOP Sizes

In Some BOP Sizes

In Some BOP Sizes

Shearing Blind Rams Available

In Some BOP Sizes

Yes

Yes

Yes

Yes

DVS Shear Rams Available

In Some BOP Sizes

No

In Some BOP Sizes

In Some BOP Sizes

In Some BOP Sizes

Grip and Seal Rams Available

No

No

In Some BOP Sizes

In Some BOP Sizes

No

CAMRAM Top Seals Standard

Yes

Yes

Yes (through 18-3/4”)

Yes (through 18-3/4”)

Yes (through 18-3/4”)

CAMRAM Packers Standard

Yes

Yes

In Some BOP Sizes

In Some BOP Sizes

In Some BOP Sizes

CAMRAM 350 Packers and Top Seals Available

Yes

Yes

Yes

Yes

Yes

Rams Suitable for H 2S Service

Yes

Yes

Yes

Yes

Yes

Ram Wear Pads Standard

Yes

Yes

No

No

No

Pipe Rams Available to Fit Standard Pipe Sizes

10

UL BOP

Comparison of Cameron Ram-Type Blowout Preventers

Cameron offers a wide range of ram-type BOPs to meet the dynamic needs of the drilling industry. The Cameron U BOP was initially designed for underwater drilling. Today, there are more U BOPs in the field worldwide than any other ram-type BOP in the industry. As technology and the needs of the drilling industry changed, Cameron responded by developing new ram-type BOP designs. Cameron introduced the U II BOP for subsea applications and has since developed the T BOP and the lightweight TL and UL models for land and subsea applications.

Regardless of the model, all of the pressure containing components in Cameron ram-type BOPS are forged to provide added safety and reliability. These ram-type BOPs are just part of the complete line of Cameron drilling system products which include annular and workover preventers, gate valves, controls, subsea riser systems and land and subsea control systems. In addition, Cameron offers a complete range of drilling replacement parts through our worldwide network of aftermarket facilities.

Comparison of Cameron Ram-Type BOPs Description

TL BOP

T BOP

UL BOP

U BOP

U II BOP

Surface Applications

Yes

Yes

Yes

Yes

No

Subsea Applications

Yes

Yes

Yes

Yes

Yes

–

–

–

3000 psi WP

–

–

–

5000 psi WP

5000 psi WP

–

–

–

10,000 psi WP

10,000 psi WP

–

–

–

15,000 psi WP

15,000 psi WP

–

–

–

–

3000 psi WP

–

–

–

–

5000 psi WP

–

–

–

–

10,000 psi WP

–

–

–

–

15,000 psi WP

–

–

–

–

3000 psi WP

–

Bore Sizes and Working Pressures 7-1/16”

11”

13-5/8”

16-3/4”

18-3/4”

–

–

–

5000 psi WP

–

–

10,000 psi WP

–

10,000 psi WP

–

–

–

–

15,000 psi WP

–

–

–

–

3000 psi WP

–

–

–

–

5000 psi WP

– –

–

–

–

10,000 psi WP

5000 psi WP

–

–

–

–

10,000 psi WP

–

–

10,000 psi WP

10,000 psi WP

15,000 psi WP

15,000 psi WP

–

–

15,000 psi WP

20-3/4”

–

–

–

3000 psi WP

–

21-1/4”

–

–

–

2000 psi WP

–

–

–

–

5000 psi WP

–

–

–

–

10,000 psi WP

–

26-3/4”

–

–

–

3000 psi WP

–

Side Ram Removal

Yes

Yes

No

No

No

Metal-to-Metal Bonnet Gaskets

No

Yes

No

No

No

Hydraulic Stud Tensioning* Bonnet Seal Carrier Hydromechanical Locking Mechanism

Not Required

Yes

No

Available on large sizes

Yes

Standard

TX Gasket

Available

Available

Available

ST Lock/Wedgelocks

ST Lock

Wedgelocks

Wedgelocks

Wedgelocks

Hydraulically Opening Bonnets

Yes

Yes

Yes

Yes

Yes

Bonnet Studs Instead of Bolts

Yes

Yes

Yes

No

No

Field-Replaceable Bonnet Cylinders, Pistons, Seals

Yes

Yes

Yes

Yes

Yes

Manufactured in Accordance to NACE

Yes

Yes

Yes

Yes

Yes

Monogrammable to API 16A

Yes

Yes

Yes

Yes

Yes

Single

Yes

Yes

Yes

Yes

Yes

Double

Yes

Yes

Yes

Yes

Yes

Modular

Yes

Yes

No

No

No

API Flange

Yes

Yes

Yes

Yes

Yes

Clamp Hub

Yes

Yes

Yes

Yes

Yes

Studded

Yes

Yes

Yes

Yes

Yes

Body Styles

End and Outlet Preps

* Not required when using bonnet seal carrier 

11

U BOP The Cameron U BOP is the most widely used ram-type BOP for land, platform and subsea applications worldwide and offers the widest range of sizes of any Cameron ram-type BOP. Like all other Cameron preventers, the rams in the U BOP are pressureenergized. Wellbore pressure acts on the rams to increase the sealing force and maintain the seal in case of hydraulic pressure loss. Seal integrity is actually improved by increased well bore pressure. Other features of the U BOP include: • Hydraulic stud tensioning available on larger sizes to ensure that stud loading is consistently accurate and even.

• Bonnet seal carrier is available to eliminate the need for high makeup torque on bonnet studs and nuts. • Hydraulically operated locking mechanisms, wedgelocks, lock the ra m hydraulically and hold the rams mechanically closed even when actuating pressure is released. The operating system can be interlocked using sequence caps to ensure that the wedgelock is retracted before pressure is applied to open the BOP. • For subsea applications, a pressure balance chamber is used with the wedgelocks to eliminate the possibility of the wedgelock becoming unlocked due to hydrostatic pressure. Other features include hydraulically opening bonnets, forged body and a wide selection of rams to meet all applications. See pages 21 through 26 for rams available to fit the U BOP.

SD-3772

Wedgelock Assembly

SD-5308

U Blowout Preventer

12

U BOP Hydraulic Control System The U blowout preventer is designed so that hydraulic pressure opens and closes the rams and provides the means for quick ram change-out. Ram closing pressure closes the rams. When the bonnet bolts are removed, closing pressure opens the bonnet. After the bonnet has moved to the fully extended position, the ram is clear of the body. An eyebolt can be installed in the top of each ram to lift it out of the preventer.

Ram opening pressure opens the rams. Following ram change-out, this pressure closes the bonnets. The rams are pulled outward, near the bonnets before the bonnets begin moving toward the preventer body. This assures that the rams never obstruct the bore or interfere with the pipe in the hole. Hydraulic pressure draws the bonnets tightly against the preventer body and the bonnet bolts are reinstalled to hold the bonnets closed.

U Blowout Preventer Hydraulic Control System

SD-84-05

Ram Open, Bonnet Closed Ram Closed, Bonnet Open

U BOP Operating Data and Fluid Requirements Bore Size and Working Pressure 7-1/16" All WP 11" Except 15,000 psi 11" 15,000 psi 13-5/8" Except 15,000 psi 13-5/8" 15,000 psi Model B 16-3/4" 3000 psi Model B 16-3/4" 5000 psi Model B 16-3.4" 10,000 psi 18-3/4" 10,000 psi 20-3/4" 3000 psi 21-1/4" 2000 psi 21-1/4" 5000 psi 21-1/4" 10,000 psi 26-3/4" 3000 psi

Large Bore Shear Bonnet Operating Data and Fluid Requirements

Gals to Open Gals to Close Locking Closing Opening Pipe Rams Pipe Rams Screw Turns Ratio Ratio (1 Set) (1 Set) (Each End) 1.3 3.4 5.7 5.5

1.3 3.5 5.8 5.8

18 27 32 32

6.9:1 7.3:1 9.8:1 7.0:1

2.2:1 2.5:1 2.2:1 2.3:1

10.4 9.8 9.8 11.6 21.3 8.1 9.0 27.3 24.5 10.1

10.6 10.6 10.6 12.5 23.1 8.7 8.7 30.0 26.9 10.8

45 38 38 45 54 46 46 54 51 58

10.6:1 6.8:1 6.8:1 6.8:1 7.4:1 7.0:1 7.0:1 7.2:1 7.2:1 7.0:1

3.6:1 2.3:1 2.3:1 2.3:1 3.7:1 1.3:1 1.3:1 4.0:1 4.0:1 1.0:1

Bore Size and Working Pressure 7-1/16" All WP 11" Except 15,000 psi 11" 15,000 psi 13-5/8" Except 15,000 psi 13-5/8" 15,000 psi Model B 16-3/4" 3000 psi Model B 16-3/4" 5000 psi Model B 16-3.4" 10,000 psi 18-3/4" 10,000 psi 20-3/4" 3000 psi 21-1/4" 2000 psi 21-1/4" 5000 psi 21-1/4" 10,000 psi 26-3/4" 3000 psi

13

Gals to Open Gals to Close Locking Closing Opening Pipe Rams Pipe Rams Screw Turns Ratio Ratio (1 Set) (1 Set) (Each End) __ __ __ __ __ 6.8 8.9 10.5 16.0 18.4 18.2 18.2 __

7.9 9.0 10.9 16.2 19.0 19.0 19.1 __

27 32 32 45 38 38 45 __

12.0:1 15.2:1 10.8:1 16.2:1 10.4:1 10.4:1 10.4:1 __

4.8:1 3.7:1 4.5:1 6.0:1 4.4:1 4.4:1 4.4:1 __

14.3 14.3 __ __ __

14.9 14.9 __ __ __

46 46 __ __ __

10.8:1 10.8:1 __ __ __

1.7:1 1.7:1 __ __ __

U BOP Specifications and Accessories The following specifications apply to typical Cameron U type BOPs. Your Cameron representative can provide information on non-standard BOP assemblies. • Side outlets to 4-1/16" (7-1/16" on 26-3/4" BOPs) can be provided beneath each set of rams on either or both sides of U BOPs. Side outlets can be studded, open-face flange or clamp hub with the same pressure rating as the vertical run connections. • Flanges conform to API standard 6A and/or 16A. Hubs conform to API 16A or applicable standards. Type 6BX flanges are standard for 10,000 and 15,000 psi working pressures and for 5000 psi for 13-5/8" and larger bore BOPs. • Hydraulic control connections for operation of rams and bonnets are 1" NPT. There are two connections for each set of rams. Wedgelock connections are 1/2" NPT. • The dimensions chart shown on the following page does not include spacers between rams for double ram models. U BOPs with spacers to clear tool joints can be obtained on special order.

The capital letters in the following designations refer to the three U BOP dimensional views and dimensions charts shown on the following page. A-1 Length - bonnets closed, locking screws locked A-2 Length - bonnets opened, locking screws unlocked A-3 Length - bonnets closed, with wedgelocks A-4 Length - bonnets opened, with wedgelocks B-1 Height - flanged B-2 Height - clamp hubs B Height - added height if 30" spacing is required for double C Width - no side outlets D Centerline of preventer to outlet flange or hub face. This distance is variable and must be determined per individual specifications. E-1 Centerline of side outlet (outlet below rams in double) to bottom flange face E-2 Centerline of side outlet (outlet below rams in double) to bottom hub face F-1 Top of upper ram to top flange face F-2 Top of upper ram to top hub face G Height of ram H-1 Centerline of side outlet between rams to bottom flange face H-2 Centerline of side outlet between rams to bottom hub face J Top of lower ram to bottom of upper ram

U BOP Standard Accessories Size and Working Pressure 7-1/16" 3000 psi 7-1/16" 5000 psi 7-1/16" 10,000 and 15,000 psi 11" 3000, 5000 and 10,000 psi 11" 15,000 psi 13-5/8" 3000 and 5000 psi 13-5/8" 10,000 psi 13-5/8" 15,000 psi 16-3/4" 3000 and 5000 psi 16-3/4" 10,000 psi 18-3/4" 10,000 psi 20-3/4" 3000 psi 21-1/4" 2000 psi 21-1/4" 5000 psi 21-1/4" 10,000 psi 26-3/4" 10,000 psi

Ram Lube* 713878 713878 713878 713878 713878 713878 713878 713878 713878 713878 713878 713878 713878 713878 713878 713878

Cameron Box Wrench* 713114-08 7957-06 713114-10 713114-10 713114-13 7959-08 713114-10 *** 713114-13 *** *** 713114-08 713114-10 *** *** 713114-13

Allen Wrench* Packing Screw 8721-01 8721-01 8721-01 8721-01 8721-01 8721-01 8721-01 8721-01 8721-01 8721-01 8721-01 8721-01 8721-01 8721-01 8721-01 8721-01

* One required. **Two required for single preventer, four for double preventer. *** Commercially available sockets are recommended.

14

Handwheel** 5457 5457 5457 5298 5298 5298 5298 5298 5298 5298 5298 5298 5298 5298 5298 5298

Universal Joint** 6018-01 6018-01 6018-01 6018-03 6018-03 6018-03 6018-03 6018-03 6018-03 6018-03 6018-03 6018-03 6018-03 6018-03 6018-03 6018-03

Extension Wrench* 5652 5652 5652 5526 5526 5526 5526 5526 5526 5526 5526 5526 5526 5526 5526 5526



U BOP Dimensions      



A

C



D





       

       

F

       

SD-84-201

Top View - Single or Double U BOP

G 



J

B

       

G

       F        

H





A



E                

G



SD-84-201



B





E        

Side View - Double U BOP

       

SD-9928

Side View - Single U BOP

Single Open-Face Flange or Clamp Hub U BOP Dimensions* Siz e 7-1/16"** 7-1/16"** 7-1/16" 7-1/16" 11"** 11"** 11"** 11"" Mod 11 odel el 79 13- 5/ 5/8" 13-5 13 -5/8 /8"" 13-5 13 -5/8 /8"" 13-5 13 -5/8 /8"" Mo Mode dell B* B** * 16-3 16 -3/4 /4"" Mo Mode dell B 16-3 16 -3/4 /4"" Mo Mode dell B 16-3 16 -3/4 /4"* "** * 18-3 18 -3/4 /4"" 20-3 20 -3/4 /4"" 21-1 21 -1/4 /4"" 21-1 21 -1/4 /4"" 21-1 21 -1/4 /4"* "** * 26-3/4"

Pressure Rating (psi)

Vertical Bore (in.)

A-1

A-2

A-3

A-4

B-1

3 0 00 5 0 00 10,000 15,000 3 0 00 5 0 00 10,000 15, 5,00 000 0 3 0 00 5000 50 00 10, 0,00 000 0 15,0 15 ,000 00 3000 30 00 5000 50 00 10,0 10 ,000 00 10, 0,00 000 0 3000 30 00 2000 20 00 5000 50 00 10,0 10 ,000 00 3 0 00

7--1/16 7 7-1/16 77-1/16 77-1/16 711 11 11 11 13-5/8 133-5/ 5/8 8 133-5/ 5/8 8 13-5 13 -5/8 /8 16-3 16 -3/4 /4 16-3 16 -3/4 /4 16-3 16 -3/4 /4 188-3/ 3/4 4 200-3/ 3/4 4 211-1/ 1/4 4 211-1/ 1/4 4 21-1 21 -1/4 /4 26-3/4 26

74.000" 74.000" 7 4. 4.000" 7 4. 4.000" 96.250" 96.250" 96.250" 124. 12 4.00 000" 0" 1 12 12.125" 112 11 2.1 .125 25"" 114 11 4.1 .125 25"" 139. 13 9.00 000" 0" 127. 12 7.25 250" 0" 129. 12 9.25 250" 0" 139. 13 9.00 000" 0" 156 15 6.3 .375 75"" 143 14 3.6 .688 88"" 143 14 3.6 .688 88"" 164 16 4.2 .250 50"" 163. 16 3.37 375" 5" 169.625"

109.500" 109.500" 109.500" 109.500" 146.875" 146.875 146.875 175.3 175 .312 12"" 171.500" 171 17 1.5 .500 00"" 172.7 172 .750 50"" 214.375" 214.37 5" 204.56 204. 562" 2" 202.125 202.1 25 218. 21 8.37 375" 5" 242.1 242 .125 25"" 226.8 226 .812 12"" 226.8 226 .812 12"" 247.2 247 .250 50"" 250.3 250 .375 75"" 275.375"

__ __ __ __ __

__ __ __ __ __

110.125" 110.125" 124.5 124 .500 00"" 122.688" 122. 12 2.68 688" 8" 124. 12 4.68 688" 8" 152. 15 2.25 250" 0" 147. 14 7.25 250" 0" 149.250 149.2 50"" 155. 15 5.50 500" 0" 166. 16 6.50 500" 0" 163. 16 3.93 938" 8" 163. 16 3.93 938" 8" 180. 18 0.93 938" 8" 181. 18 1.12 125" 5" __

150.188" 150.188" 167 67.1 .12 25" 166.062" 16 166.0 166 .062 62"" 167 16 7.3 .312 12"" 205. 20 5.50 500" 0" 199. 19 9.37 375" 5" 202. 20 2.25 250" 0" 212. 21 2.00 000" 0" 226 22 6.6 .625 25"" 223 22 3.8 .875 75"" 223 22 3.8 .875 75"" 239 23 9.2 .250 50"" 239. 23 9.50 500" 0" __

24.062" 27. 7.50 500 0" 30.5 30 .562 62"" 31.812" 29.062" 34.312" 35.688" 44.8 44 .81 12" 31.312" 33. 3.81 812 2" 41.68 41. 688 8" 53.688" 53.68 8" 40.06 40. 062" 2" 43.062 43.0 62"" 49.6 49 .688 88"" 56.00 56. 000 0" 40. 0.56 562 2" 37. 7.18 188 8" 50.93 50. 938 8" 66.0 66 .000 00"" 48.312"

B-2 __ 25.18 25.1 88" 27.1 27 .188 88"" __ __ 29.312" 32.188" 33.8 33 .875 75"" __ 31.93 31.9 38" 32.8 32 .81 12" 42.0 42 .000 00"" 31.7 31 .750 50"" 34.9 34 .938 38"" 41.9 41 .938 38"" 43.2 43 .23 34" 33.3 33 .31 12" 33.3 33 .31 12" 46.1 46 .12 25" 53.0 53 .000 00"" __

C

E-1

E-2

F-1

F-2

20.250 20.2 50"" 20.2 20 .250 50"" 20.6 20 .625 25"" 20.625 20. 625"" 25.1 25 .125 25"" 25.125" 25 25.750" 25 32. 2.00 000 0" 29.250 29. 250"" 29.25 29. 250" 0" 30. 0.25 250" 0" 39.5 39 .500 00"" 35.7 35 .750 50"" 35.7 35 .750 50"" 39.5 39 .500 00"" 42. 2.50 500" 0" 39.516 39.5 16"" 39.516 39.5 16"" 42.500 42.5 00"" 47.2 47 .250 50"" 46.250 46. 250""

8.750" 8.75 0" 10.4 10 .406 06"" 11.0 11 .062 62"" 11.688 11. 688"" 9.81 9. 812" 2" 12.438" 12 1 3. 3.125" 16.6 16 .688 88"" 10.312 10. 312"" 11.5 11. 562 62"" 15.1 15 .125 25"" 21.3 21 .375 75"" 13.3 13 .312 12"" 14.8 14 .812 12"" 19.3 19 .375 75"" 20.5 20 .500 00"" 14.3 14 .312 12"" 12.6 12 .625 25"" 17.9 17 .969 69"" 24.5 24 .531 31"" 17.438 17. 438""

__

7.844" 9.62 9. 625 5" 12.0 12 .031 31"" 12.656" 10.531" 13.156" 13.844" 17.7 17 .78 81" 11.531" 12.7 12 .781 81"" 17.0 17 .094 94"" 22.8 22 .844 44"" 15.4 15 .406 06"" 16.9 16 .906 06"" 20.2 20 .219 19"" 22.0 22 .000 00"" 16.2 16 .281 81"" 14.5 14 .594 94"" 18.7 18 .719 19"" 26.2 26 .250 50"" 19.906"

__

9.250 9.25 0" 9.37 9. 375" 5" __ __ 9.938" 11.375" 11.21 11.2 19" __ 10. 0.62 625 5" 10.68 10. 688 8" 15.5 15 .500 00"" 9.15 9. 156" 6" 10.7 10 .750 50"" 15.50 15. 500" 0" 13.875 13.8 75"" 10.68 10. 688 8" 10.68 10. 688 8" 17.18 17. 188 8" 18.03 18. 031" 1" __

Approx. Weight (lbs)

G

5.50" 5.5 5. 50" 5.50 5. 50"" 5.50" 6.75" 10.656" 6.75" 12.094" 6.75" 12.312 12.3 12"" 9.2 9. 25" __ 7.50" 11.844 11.8 44"" 7.5 7. 50" 12.6 12 .656 56"" 7.5 7. 50" 17.0 17 .000 00"" 8.00 8. 00"" 11.2 11 .250 50"" 9.25 9. 25"" 12.8 12 .844 44"" 9.25 9. 25"" 16.344" 16.34 4" 9.25 9. 25"" 15.344 15.3 44"" 12 12.0 .00" 0" 12.656 12.6 56"" 8.0 8. 00" 12.656 12.6 56"" 8.0 8. 00" 14.6 14 .688 88"" 13.5 13.50" 0" 19.7 19 .750 50"" 13.50 13.50"" __ 8.00 8. 00""

8.469 8.4 69"" 10.3 10 .344 44"" __ __

26 0 0 280 28 00 3550 35 50 3800 5300 5600 6400 10,3 10 ,30 00 7200 770 77 00 10,3 10 ,30 00 23,7 23 ,700 00 13,7 13 ,700 00 13,7 13 ,750 50 23,3 23 ,300 00 28,9 28 ,90 00 13,6 13 ,65 50 13,2 13 ,25 50 30,0 30 ,00 00 34,6 34 ,650 50 24,0 24 ,000 00

*See page 14 for detailed explanation of dimensional designations. **Available with stud x flange connections.

Double Open-Face Flange or Clamp Hub U BOP Dimensions* Size

Press. Rating (psi)

Vert. Bore (in.)

7 -1 -1 /1 /1 6" 6"* *

3 00 00 0

7- 1/ 71/ 16 16

A-1

A-2

A-3

A-4

B-2

B***

C

E-1

7 4. 4.0 00 00 " 1 09 09 .5 .5 00 00 "

__

__

41.000" __

__

44.1 44 .188 88"" 41 41.8 .875 75"" 18 18.8 .812 12"" 20.250 20.250"" 10 10.4 .406 06""

5 00 00 0

7- 1/ 71/ 16 16

7 4. 4.0 00 00 " 1 09 09 .5 .5 00 00 "

__

7 -1 -1 /1 /1 6" 6"

1 0, 0,0 00 00

7- 1/ 71/ 16 16

7 4. 4.0 00 00 " 1 09 09 .5 .5 00 00 "

__

__

7 -1 -1 /1 /1 6" 6"

1 5, 5,0 00 00

7- 1/ 71/ 16 16

7 4. 4.0 00 00 " 1 09 09 .5 .5 00 00 "

__

__

__

__

7 -1 -1 /1 /1 6" 6"* *

B-1

11"**

3 00 0

11

96.250"

146.875"

11"* 11 "** *

5000 50 00

11

96.2 96 .250 50""

146. 14 6.87 875" 5" 110.1 110.125 25""

150. 15 0.18 188" 8"

E-2

F-1

F-2

G

H-1

__

7.844"

__

5.50" 25.68 25.688" 8"

9.25 9. 250" 0"

9.62 9. 625" 5"

8.46 8. 469" 9"

5.50 5. 50"" 27 27.0 .094 94""

48.625" 48. 625" 45.250 45.250"" 17.438 17.438"" 20.62 20.625" 5" 11. 11.062 062"" 9.3 9.375" 75" 12.0 12.031" 31" 49.875" __ 17.438" 17.43 8" 20.625 20.625"" 11.688" 11.688" __ 12.656" 49.250" __ 16.562 16. 562"" 25.125" 25.125" 9.8 9.812" 12" __ 10.531"

10.344"" 10.344 __ __

6.75 6.7 5

54.5 54 .500 00"" 49 49.5 .500 00"" 16.56 16.562" 2" 25 25.1 .125 25"" 12.43 12.438" 8"

9.93 9. 938" 8" 13 13.1 .156 56""

10.6 10 .656 56""

18.562 18. 562"" 20.250" 20.250"

8.750" 8.7 50"

5000 50 00 5200 52 00

5.50" 5.5 0" 29.125" 29.125"

27.438"" 1 27.438 12.5 2.562" 62" __ 12.5 12 .562 62"" 30.000 30. 000"" __ 13.4 13 .438 38""

6400 640 0

5.50" 29.750 29.750""

6750 67 50

30.1 30 .125 25"" 13 13.4 .438 38"" 10, 10,20 200 0 31.5 31 .562 62"" 13 13.4 .438 38"" 11 11,3 ,300 00

10,0 10 ,000 00

11

96.2 96 .250 50"" 146.87 146.875" 5" 110.1 110.125 25""

150. 15 0.18 188" 8"

55.8 55 .875 75"" 52.37 52.375" 5" 16. 16.562 562"" 25 25.7 .750 50"" 13.12 13.125" 5" 11 11.3 .375 75"" 13 13.8 .844 44""

12.0 12 .094 94""

6.75 6. 75"" 33.3 33.312 12""

11

124. 12 4.00 000" 0" 17 175. 5.31 312" 2" 12 124. 4.50 500" 0"

167. 16 7.12 125" 5"

9.25 9. 25"" 41 41.6 .625 25""

13-5/ 135/8 8 11 112. 2.12 125" 5" 17 171. 1.50 500" 0" 12 122. 2.68 688" 8"

166.0 166 .062 62""

69.7 69 .750 50"" 58.8 58.812 12"" 14.3 14.312 12"" 32.0 32.000 00"" 16 16.6 .688 88"" 11.2 11.219 19"" 17.78 17.781" 1" 12 12.3 .312 12"" 53.3 53 .375 75"" __ 15.438"" 29.250 15.438 29.250"" 10.312 10.312"" __ 11.531" __

5000 50 00

13-5 13 -5/8 /8""

10,0 10 ,000 00

9900 99 00

6.75 6. 75"" 32.6 32.625 25""

15,0 15 ,000 00

13-5 13 -5/8 /8""

Approx. Weight (lbs)

11.43 11. 438" 8"

11"" Mo 11 Mode dell 79

3000 30 00

__

J

25.9 25 .938 38"" 11. 11.18 188" 8"

11"* 11 "** * 13-5 13 -5/8 /8""

H-2

36.156 36.1 56"" 15. 15.68 688" 8" 18,40 18,400 0 7.50" 32.375" 32.375" __ 14.562" 14.56 2" 14,30 14,300 0

13-5/ 13 -5/8 8 112. 112.12 125" 5" 17 171. 1.50 500" 0" 12 122. 2.68 688" 8"

166. 16 6.06 062" 2"

55.8 55 .875 75"" 54 54.0 .000 00"" 15 15.4 .438 38"" 29.2 29.250 50"" 11 11.5 .562 62"" 10 10.6 .625 25"" 12.7 12.781 81""

11.8 11 .844 44""

7.50 7. 50"" 33.625 33.625""

32.6 32 .688 88"" 14 14.5 .562" 62" 14, 14,80 800 0

13-5/ 13 -5/8 8 114.1 114.125 25""

172. 17 2.25 250" 0" 12 124. 4.68 688" 8"

167. 16 7.31 312" 2"

66.6 66 .625 25"" 57 57.7 .750 50"" 12 12.5 .562 62"" 30.25 30.250" 0" 15 15.1 .125 25"" 10 10.6 .688 88"" 17.09 17.094" 4"

12.6 12 .656 56""

7.50 7. 50"" 40 40.0 .062 62""

35.6 35 .625 25"" 17 17.4 .438" 38" 18, 18,40 400 0

13-5/8 135/8"" Mod B** 15,000 15,000

13-5/8 13-5 /8 139.000" 139.000" 214 214.37 .375" 5" 152 152.25 .250" 0"

205.50 205 .500" 0"

81.750 81. 750"" 70. 70.125 125""

17.000 17. 000""

8.00" 8.0 0" 49. 49.438 438""

43.562 43. 562"" 20.06 20.062" 2" 43,250 43,250

16-3/4 163/4"" Mod B

3000 300 0

16-3/4 16-3 /4 127.25 127.250" 0" 204 204.56 .562" 2" 147 147.25 .250" 0"

199.37 199 .375" 5"

65.875 65. 875"" 57. 57.562 562"" 13. 13.438 438"" 35.750" 35.750" 13.312" 13.312"

9.156" 9.1 56" 15.40 15.406" 6"

11.250 11. 250""

9.25" 9.2 5" 39.125" 39.125"

34.969 34. 969"" 16. 16.562" 562" 26,65 26,650 0

16-3/4 163/4"" Mod B

5000 500 0

16-3/4 16-3 /4 129.250 129.250""

202.12 202 .125" 5" 149. 149.250 250""

202.25 202 .250" 0"

68.875 68. 875"" 60. 60.750 750"" 13. 13.438 438"" 35.750" 35.750" 14. 14.812 812"" 10.7 10.750" 50" 16.90 16.906" 6"

12.844 12. 844""

9.25" 9.2 5" 40.625" 40.625"

36.562 36. 562"" 16.5 16.562" 62" 26,940 26,940

9.938" 9.9 38" 39.500" 39.500" 21. 21.375 375"" 15.50 15.500" 0" 22.844" 22.844"

16-3 16 -3/4 /4"* "** *

10,0 10 ,000 00

16-3/ 16 -3/4 4 139.00 139.000" 0" 21 218. 8.37 375" 5" 15 155. 5.50 500" 0"

212. 21 2.00 000" 0"

77.7 77 .750 50"" 70 70.0 .000 00"" 11 11.1 .188 88"" 39.500 39.500"" 19 19.3 .375 75"" 15. 15.50 500" 0" 20.21 20.219" 9"

16.3 16 .344 44""

9.25 9. 25"" 47 47.4 .438 38""

43.5 43 .562 62"" 18. 18.812 812"" 43,500 43,500

18-3 18 -3/4 /4""

10,0 10 ,000 00

18-3/ 18 -3/4 4 156.3 156.375 75""

242. 24 2.12 125" 5" 16 166. 6.50 500" 0"

226. 22 6.62 625" 5"

87.1 87 .125 25"" 74 74.0 .000 00"" 10 10.8 .875 75"" 42.50 42.500" 0" 20 20.5 .500 00"" 13. 13.87 875" 5" 22.0 22.000 00""

15.3 15 .344 44"" 12 12.0 .00" 0" 51.500 51.500""

44.8 44 .875 75"" 19. 19.125 125"" 56,95 56,950 0

20-3 20 -3/4 /4""

3000 30 00

20-3/ 20 -3/4 4 143. 143.68 688" 8" 22 226. 6.81 812" 2" 16 163. 3.93 938" 8"

223. 22 3.87 875" 5"

66.1 66 .125 25"" 58 58.8 .875 75"" 12 12.4 .438 38"" 39.5 39.516 16"" 14 14.3 .312 12"" 10 10.6 .688 88"" 16.2 16.281 81""

12.6 12 .656 56""

8.00 8. 00"" 39.875 39.875""

36.2 36 .250 50"" 17 17.5 .562 62"" 25,5 25,550 50

21-1 21 -1/4 /4""

2000 20 00

21-1/ 21 -1/4 4 143. 143.68 688" 8" 22 226. 6.81 812" 2" 16 163. 3.93 938" 8"

223. 22 3.87 875" 5"

62.7 62 .750 50"" 58 58.8 .875 75"" 12 12.4 .438 38"" 39.5 39.516 16"" 12 12.6 .625 25"" 10 10.6 .688 88"" 14.5 14.594 94""

12.6 12 .656 56""

8.00 8. 00"" 38.188 38.188""

36.2 36 .250 50"" 17 17.5 .562 62"" 25,1 25,150 50

21-1 21 -1/4 /4""

5000 50 00

21-1/ 21 -1/4 4 164.2 164.250 50""

239. 23 9.25 250" 0"

82.3 82 .375 75"" 74 74.0 .000 00"" 12 12.3 .375 75"" 42.50 42.500" 0" 17.969 17.969"" 17 17.1 .188 88"" 18.7 18.719 19""

14.6 14 .688 88"" 13.50" 13.50" 49.03 49.031" 1"

45.0 45 .000 00"" 17 17.6 .625 25"" 58,00 58,000 0

21-1/4 211/4"** "** 2 66- 3/ 3/ 4" 4"

10,000 10, 000 3 00 00 0

247. 24 7.25 250" 0" 18 180. 0.93 938" 8"

21-1/4 21-1 /4 163.3 163.375" 75" 250 250.37 .375" 5" 181.125 181.125"" 2 66- 3/ 3/ 4 1 69 69 .6 .6 25 25 " 2 75 75 .3 .3 75 75 " __

239.500" 239.50 0" 100.06 100.062" 2" 87. 87.062 062"" __ 78.875" __

*See page 14 for detailed explanation of dimensional designations. **Available with stud x flange connections. ***See previous page for explanation.

15

9.438" 9.4 38" 47.2 47.250" 50" 24.531" 24.531" 18.031 18.031"" 26. 26.250 250"" 19. 19.750 750"" 13.50" 13.50" 58.59 58.594" 4" 52. 52.094 094"" 20. 20.562" 562" 6 65,5 5,500 00 7.438" 46.250" 46.250" 17.438 17.438"" __ 19.906" __ 8.00" 48.000 48.000"" __ 22.562"" 44,20 22.562 44,200 0

7-1/16" 7-1/1 6" 3000 - 11" 11" 10,000 psi psi WP U BOP Part Numbers Numbers 22

37

34

12

36

38

35

17

16

15

24

18

22

19

40

5

10

SD-5287

42

4

26

7

14

13

8

3

28

27

33

9

29

6

11

32

31

30

2

25

23

21

20

41

1

4

U BOP Exploded View

U Blowout Preventer Part Numbers Item No. 1 2 2A 3 4 5 5A 6 6A 7 8 8A 9 10 11 12 12A 13 13A 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43

Description Description

Qty Sgl

Qt y Dbl

7-1/16" 3000 psi Model II

__ Body 1 1 Intermediate Flange 2 4 30266-03 I nt ntermediate Flange/Shear 41499-03** 41 Bonnet 2 4 30278-04 R am Assembly 2 4 644216-() Piston, Operating 2 4 236501-15-11-08 23 Piston, Operating/Shear Pi 49116-01** Cylinder, Operating 2 4 30274-02 Cylinder, Operating/Shear Cy 41365-02 Housing, Locking Screw 2 4 30308-01 Locking Screw 2 4 30326 Locking Screw/Shear 49258-01 Piston, Ram Change/Open Pi 2 4 30324 Piston, Ram Change/Close 2 4 30325 Cylinder, Ram Change 4 8 30273-02 Bolt, Bonnet 8 16 30312-06 Bolt, Bonnet/Shear 41366-06 Stud St ud,, Lo Lock ckin ing g Sc Scre rew w Ho Hous usin ing g 16 32 21 2190 9065 65-1 -100-04 04-4 -41 1 Stud, Stu d, Loc Lockin king g Scr Screw ew Hou Housin sing/S g/Shear hear 38732387 32-5757-0000-54 54 Nut, Nu t, Lo Lock ckin ing g Sc Scre rew w Ho Hous usin ing g 16 32 27 2709 0900 0000-10 10-0 -01 1 Check Valve, Plastic Packing Ch 2 4 M517988 Screw, Plastic Packing 2 4 5940-09 Pi pe pe P lu g, g, P la la st st ic ic P ac ac ki kin g 2 4 0 05 059 30 30 -0 -0 55- 10 10 Ring, Plastic Packing 2 4 12469-36 Ring, Plastic Energizing 2 4 18586-12 Seal Se al Ri Ring ng,, Co Conn nnec ecti ting ng Ro Rod d 2 4 2127 21 2741 41-3 -377-00 00-0 -01 1 __ Ring Back-Up 4 8 Seal Se al,, Bo Bonn nnet et 2 4 6441 64 4197 97-0 -011-00 00-0 -01 1 Pin, Ram Guide 4 8 30313-02 O -R -R in in g, g, O pe pe ra ra titin g C yl yl in de de r 4 8 7 02 02 64 64 00- 44 44 -6 -6 1 O-Ring, Operating Piston Rod to Int Flg 2 4 18492-92 Lip Seal, Operating Piston 2 4 710541 Seal Ring, Tail Rod 2 4 11741-32 11 O -R -Ring, Wiping 2 4 702640-33-11 70 O-Ri ORing ng,, Ra Ram m Ch Chan ange ge Pi Pist ston on to Bo Body dy 4 8 7026 70 2640 40-3 -322-41 41 O-Ri ORing ng,, Ra Ram m Ch Chan ange ge Pi Pist ston on Ro Rod d to In Intt Fl Flg g 4 8 7026 70 2640 40-3 -322-91 91 O-Ri ORing ng,, Ra Ram m Ch Chan ange ge Cy Cyli lind nder er to In Intt Fl Flg g 4 8 7026 70 2640 40-3 -333-81 81 O-Ri ORing ng,, Ra Ram m Ch Chan ange ge Cy Cyli lind nder er to Bo Bonn nnet et 4 8 7026 70 2640 40-3 -344-21 21 O -R -R in in g, g, R am am C ha ha ng ng e P is is to to n 4 8 7 02 026 40 40 -3 -3 33- 21 21 O-Ri ORing ng,, Bo Bonn nnet et Bo Bolt lt Re Reta tain iner er 8 16 7026 702640 40-2 -222-31 31 Cap Screw, Int Flange to Bonne Bonnett 16*** 32*** 702585-2 702585-22-00-5 2-00-50 0 Gland, Bleeder 2 4 17454-08 Plug, Bleeder 2 4 17454-09 Lifting Eye 2 2 11849 Packing, Plastic 10 20 7650-08 20 Washer 2 4 689523-04 Ring, Retainer 2 4 18572-83 Wear Ring, Operating Piston We 2 4 49223-03 Spacer Spa cer,, She Shear* ar**** *** 687117-01

7-1/16" 5000 psi Model II __

7-1/16" 10,000 psi Model II __

30266-03 41499-03** 30278-03 644216-() 236501-15-11-08 49116-01** 30274-02 41365-02 30308-01 30326 49258-01 30324 30325 30273-02 30312-02 41366-02 2190 21 9065 65-1 -100-04 04-4 -41 1 38732-57-0038732-5700-54 54 2709 27 0900 0000-10 10-0 -01 1 M517988 5940-09 0 05 05 93 93 00- 05 05 -1 -1 0 12469-36 18586-12 2127 21 2741 41-3 -377-00 00-0 -01 1 __

30266-01 41499-01** 30278-02 644216-() 236501-15-11-08 49116-01** 30274-02 41365-02 30308-01 30326 49258-01 30324 30325 30273-02 30312-07 41366-07 2190 21 9065 65-1 -100-04 04-4 -41 1 38732-57-0038732-5700-54 54 2709 27 0900 0000-10 10-0 -01 1 M517988 5940-09 0 05 05 93 93 00- 05 05 -1 -1 0 12469-36 18586-12 2127 21 2741 41-3 -377-00 00-0 -01 1 21792-21 6441 64 4197 97-0 -011-00 00-0 -01 1 64 6441 4197 97-0 -011-00 00-0 -01 1 30313-02 30313-02 7 02 02 6 64 40 -4 -4 44- 61 61 7 02 02 64 64 00-4 44- 61 61 18492-92 18492-92 710541 710541 11741-32 11741-32 702640-33-11 702640-33-11 7026 70 2640 40-3 -322-41 41 7026 70 2640 40-3 -322-41 41 7026 70 2640 40-3 -322-91 91 7026 70 2640 40-3 -322-91 91 7026 70 2640 40-3 -333-81 81 7026 70 2640 40-3 -333-81 81 7026 70 2640 40-3 -344-21 21 7026 70 2640 40-3 -344-21 21 7 02 02 64 64 00- 33 33 -2 -2 1 7 02 02 64 64 00- 33 33 -2 -2 1 7026 70 2640 40-2 -222-51 51 7026 70 2640 40-2 -222-91 91 702585-22-00-5 702585-2 2-00-50 0 702585-22 702585-22-00-50 -00-50 17454-08 17454-08 17454-09 17454-09 11849 11849 7650-08 7650-08 689523-04 689523-04 18572-83 18572-83 49223-03 49223-03 687117-01 687117-01

7-1/16" 15,000 psi Model II __ 30266-01 41499-01** 30278-01 644216-() 236501-15-11-08 49116-01** 30274-02 41365-02 30308-01 30326 49258-01 30324 30325 30273-02 30312-01 41366-22 5913 59 13-2 -266-10 10 38732-57-0038732-5700-54 54 2709 27 0900 0000-10 10-0 -01 1 M517988 5940-09 0 05 05 93 93 00-0 55- 10 10 12469-36 18586-12 2127 21 2741 41-3 -377-00 00-0 -01 1 21792-21 6441 64 4197 97-0 -011-00 00-0 -01 1 30313-02 7 02 02 64 64 00- 44 44 -6 -6 1 18492-92 710541 11741-32 702640-33-11 7026 70 2640 40-3 -322-41 41 7026 70 2640 40-3 -322-91 91 7026 70 2640 40-3 -333-81 81 7026 70 2640 40-3 -344-21 21 7 02 02 64 64 00-3 33- 21 21 7026 70 2640 40-2 -233-21 21 702585-22-0 702585 -22-00-50 0-50 17454-08 17454-09 11849 7650-08 689523-04 18572-83 49223-03 687117-01

*A large bore shear bonnet is available for these sizes. sizes. For part numbers, see page 19. **Part numbers shown are for old style shear bonnets. For current model large bore shear bonnet part numbers, see page 19  ***13-5/8" through 16-3/4" and 20-3/4" through 26-3/4" require 24 for single and 48 for double. The 18-3/4" requires 32 for single and 64 for double. ****Required on all 11" 15,000 psi and 16-3/4" 10,000 psi BOPs with manual locking screws.

16

11" 3000 psi Model II

11" 5000 psi Model II

11" 10,000 psi Model II

__

__

__

30267-03 41457-03** 30268-01 644219-() 673178 698914** 30274-03 41365-03** 30308-02 30365 46628-01 30362 30363 30273-03 30312-04 41366-04 5915 59 15-2 -255-10 10 38732-59-00 38732-59 -00-65 -65 2709 27 0900 0000-12 12-0 -01 1 M517988 5940-09 0 05 05 93 93 00- 05 05- 10 10 12469-38 18586-13 2127 21 2741 41-3 -388-00 00-0 -01 1 21792-22 6441 64 4197 97-0 -022-00 00-0 -01 1 30313-03 7 02 02 64 64 00- 45 45 -1 -1 1 18492-91 710539 212741-33-00-01 702640-33-51 7026 70 2640 40-3 -322-61 61 7026 70 2640 40-3 -333-11 11 3142 31 4233-25 25-1 -133-85 85 2010 20 1018 1800-02 02 7 02 02 64 64 00- 33 33- 51 51 7026 70 2640 40-2 -222-71 71 702585-22-00 702585 -22-00-50 -50 17454-08 17454-09 11849 7650-08 689523-05 18572-84 49223-02 687117-02

30267-03 41457-03** 30268-02 644219-() 673178 698914** 30274-03 41365-03** 30308-02 30365 46628-01 30362 30363 30273-03 30312-03 41366-03 5915 59 15-2 -255-10 10 38732-593873259-0000-65 65 2709 27 0900 0000-12 12-0 -01 1 M517988 5940-09 0 05 05 93 93 00- 05 05 -1 -1 0 12469-38 18586-13 2127 21 2741 41-3 -388-00 00-0 -01 1 21792-22 6441 64 4197 97-0 -022-00 00-0 -01 1 30313-03 7 02 02 64 64 00- 45 45 -1 -1 1 18492-91 710539 212741-33-00-01 702640-33-51 7026 70 2640 40-3 -322-61 61 7026 70 2640 40-3 -333-11 11 3142 31 4233-25 25-1 -133-85 85 2010 20 1018 1800-02 02 7 02 02 64 64 00- 33 33 -5 -5 1 7026 70 2640 40-2 -222-91 91 702585-22-00 702585 -22-00-50 -50 17454-08 17454-09 11849 7650-08 689523-05 18572-84 49223-02 687117-02

30267-03 41457-03** 30268-03 644219-() 673178 698914** 30274-03 41365-03** 30308-02 30365 46628-01 30362 30363 30273-03 30312-05 41366-05 5915 59 15-2 -255-10 10 38732387 32-5959-0000-65 65 2709 27 0900 0000-12 12-0 -01 1 M517988 5940-09 0 05 05 93 93 00- 05 05 -1 -1 0 12469-38 18586-13 2127 21 2741 41-38 -38-0 -000-01 01 21792-22 6441 64 4197 97-0 -022-00 00-0 -01 1 30313-03 7 02 02 64 64 00- 45 45 -1 -1 1 18492-91 710539 212741-33-00-01 702640-33-51 7026 70 2640 40-3 -322-61 61 7026 70 2640 40-3 -333-11 11 3142 31 4233-25 25-1 -133-85 85 2010 20 1018 1800-02 02 7 02 02 64 64 00- 33 33 -5 -5 1 7026 70 2640 40-2 -233-41 41 702585-22-00702585-2 2-00-50 50 17454-08 17454-09 11849 7650-08 689523-05 18572-84 49223-02 687117-02

11" 15,000 - 16-3/4" 5000 psi WP U BOP Part Numbers 22

37

34

12

36

38

17

16

15

24

19

18

22

35

40

5

10

SD-5287

42

4

26

7

14

13

8

3

28

33

27

9

29

6

11

32

31

30

2

23

25

21

41

20

1

4

U BOP Exploded View

U Blowout Preventer Part Numbers Item No. 1 2 2A 3 4 5 5A 6 6A 7 8 8A 9 10 11 12 12A 13 1 3A 3A 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43

Description Description

Qt y Sgl

Qty Dbl

11" 15,000 psi Model 79

13-5/8" 3000 psi Model II

__ __ Body 1 1 IIn ntermediate Flange 2 4 49391-01 30270-01 Intermediate Flange/Shear * 686242** Bonnet 2 4 31241 30284-02 Ram Assembly 2 4 644222-() 644225-() Piston, Operating Pi 2 4 698481 679816 Piston, Operating/Shear * 687542** Cylinder, Operating 2 4 30274-01 30274-01 __ Cylinder, Operating/Shear 4136 41 3655-01 01** ** Housing, Locking Screw 2 4 30308-03 30308-03 Locking Screw 2 4 30846 30307 __ Locking Screw/Shear 30846 Piston, Ram Change/Open Pi 2 4 31239 30310 Piston, Ram Change/Close 2 4 31238 30309 Cylinder, Ram Change Cy 4 8 30273-01 30273-01 Bolt, Bonnet 8 16 30312-12 30312-09 __ Bolt, Bonnet/Shear 41366-09 St ud ud, Locking Scre w Housing 16 32 38732-61-00-75 5918-76-10 __ St ud ud , L oc oc ki ki ng ng Sc re re w H ou ou si si ng ng /S /Sh ea ea r 38732-61-00 38732 -61-00-75 -75 Nut, Nu t, Lo Lock ckin ing g Sc Scre rew w Ho Hous usin ing g 16 32 27 2709 0900 0000-14 14-0 -01 1 27 2709 0900 0000-14 14-0 -01 1 C heck Valve, Plastic Packing Ch 2 4 M517988 M517988 Screw, Plastic Packing 2 4 5940-09 5940-09 P ip ip e P lu g, g, P la st st ic ic P ac ac ki ki ng ng 2 4 00 59 59 30 30 -0 -0 55- 10 10 0 05 05 93 93 00- 05 05 -1 -1 0 Ring, Plastic Packing Ri 2 4 12469-38 12469-24 Ring, Plastic Energizing Ri 2 4 18586-13 18586-01 Seal Se al Ri Ring ng,, Co Conn nnect ectin ing g Ro Rod d 2 4 0117 01 1741 41-3 -388-00 00-0 -01 1 21 2127 2741 41-3 -366-00 00-0 -01 1   __ __ Ring Back-Up 4+ 8+ 21792-22 8+ Seal, Bonnet 2 4 49272-03 49 644197-03-00-11 Pin, Ram Guide 4 8 30313-01 30313-01 O -R -R in in g, g, O pe pe ra ra titin g C yl yl in ind er er 4 8 7 02 02 64 64 00- 45 45 -5 -5 1 7 02 02 64 640 -4 -4 55- 51 51 O-Ring, Operating Piston Rod to Int Flg 2 4 18492-91 18492-90 Lip Seal, Operating Piston Li 2 4 710538 710538 Se al al R in in g, g, T ai ai l R od od 2 4 2 12 12 74 74 11- 34 34 -0 -0 00- 01 01 2 12 12 74 74 11- 34 34 -0 -0 00- 01 01 O -R -Ring, Wiping 2 4 702640-33-71 70 702640-33-71 O-Ri ORing ng,, Ra Ram m Ch Chan ange ge Pi Pist ston on to Bo Body dy 4 8 7026 70 2640 40-3 -322-81 81 7026 70 2640 40-3 -322-81 81 O-Rin O-R ing, g, Ram Ch Chan ange ge Pi Pisto ston n Ro Rod d to In Intt Fl Flg g 4 8 7026 70 2640 40-3 -333-31 31 7026 70 2640 40-3 -333-31 31 O-Ri ORing ng,, Ra Ram m Ch Chan ange ge Cy Cyli lind nder er to In Intt Fl Flg g 4 8 7026 70 2640 40-3 -344-61 61 7026 70 2640 40-3 -344-61 61 O-Ri ORing ng,, Ram Ch Chang angee Cy Cyli lind nder er to Bo Bonn nnet et 4 8 7026 70 2640 40-4 -422-51 51 7026 70 2640 40-4 -422-51 51 O -R -R in in g, g, R am am Ch an an ge ge Pi st st on on 4 8 7 02 02 64 64 00- 33 33 -8 -8 1 7 02 02 64 64 00- 33 33 -8 -8 1 O-Ri ORing ng,, Bo Bonn nnet et Bo Bolt lt Re Reta tain iner er 8 16 70264 7026400-23 23-9 -91 1 7026 70 2640 40-2 -233-11 11 Cap Screw, Int Flange to Bonnet 16*** 32*** 702585-25 702585-25-00-54 -00-54 70258 702585-25-0 5-25-00-44 0-44 Gland, Bleeder 2 4 17454-08 17454-08 Plug, Bleeder 2 4 17454-09 17454-09 Lifting Eye 2 2 11849 11849 Packing, Plastic 10 20 7650-08 20 7650-08 Washer 2 4 689523-05 689523-01 Ring, Retainer 2 4 18572-84 18572-85 W ea ear Ring, Operating Piston 2 4 49223-01 49223-01 687117-03 687117-03 Spacer Spa cer,, She Shear* ar**** ***

13-5/8" 5000 psi Model II

13-5/8" 10,000 psi Model II

13-5/8" 15,000 psi Model B

__

__

__

30270-01 686242** 30284-01 644225-() 679816 687542** 30274-01 4136 41 3655-01 01** ** 30308-03 30307 30846 30310 30309 30273-01 30312-01 41366-01 5918-76-10 38732-61-00 38732 -61-00-75 -75 2709 27 0900 0000-14 14-0 -01 1 M517988 5940-09 0 05 05 93 93 00- 05 05 -1 -1 0 12469-24 18586-01 2127 21 2741 41-3 -366-00 00-0 -01 1 __

31216 698899 686767** * 31241 691849 644225-() 644228-() 678512 698996 690791** * 30274-01 30274-06 __ 4136 41 3655-01 01** ** 30308-03 30308-06 30307 695234 __ 30846 31239 38847 31238 038848-01 30273-01 30273-06 30312-12 30312-25   __ __ 41366-12 5918-76-10 5918-34-10 __ 38732-61-003873261-00-75 75 2709 27 0900 0000-14 14-0 -01 1 27 2709 0900 0000-14 14-0 -01 1 M517988 M517988 5940-09 5940-09 0 05 05 93 93 00- 05 05 -1 -1 0 0 05 05 93 93 00- 05 05 -1 -10 12469-24 12469-24 18586-01 18586-01 2127 21 2741 41-3 -366-00 00-0 -01 1 21 2127 2741 41-3 -366-00 00-0 -01 1   2 17 17 92 92 -2 -2 6 2 17 17 92 92- 26 26 644197-03-00-11 644197-03-00-11 644196-01 30313-01 30313-01 30313-08 7 02 02 64 64 00- 45 45 -5 -5 1 7 02 02 64 64 00- 45 45 -5 -5 1 7 02 02 64 64 55- 46 46 -1 -1 1 18492-90 18492-90 18492-90 710538 710538 710542 21 27 27 41 41 -3 -3 4 4-- 00 00 -0 -0 1 2 12 12 74 74 11- 34 34 -0 -0 00- 01 01 2 12 12 74 74 11- 45 45 702640-33-71 702640-33-71 7 02 02640-34-21 7026 70 2640 40-3 -322-81 81 7026 70 2640 40-3 -322-81 81 7026 70 2640 40-3 -333-21 21 7026 70 2640 40-3 -333-31 31 7026 70 2640 40-3 -333-31 31 3142 31 4233-21 21-1 -133-85 85 7026 70 2640 40-3 -344-61 61 7026 70 2640 40-3 -344-61 61 7026 70 2640 40-3 -355-41 41 7026 70 2640 40-4 -422-51 51 7026 70 2640 40-4 -422-51 51 7026 70 2640 40-4 -433-41 41 7 02 02 64 64 00- 33 33- 81 81 7 02 02 64 64 00- 33 33 -8 -81 7 02 02 64 64 00- 34 34 -4 -4 1 7026 70 2640 40-2 -233-21 21 7026 70 2640 40-2 -233-91 91 7026 70 2640 40-2 -244-51 51 702585-25-0 70258 5-25-00-44 0-44 702585 702585-25-0 -25-00-54 0-54 702585 702585-31-00 -31-00-54 -54 17454-08 17454-08 17454-08 17454-09 17454-09 17454-09 11849 11849 11849 7650-08 7650-08 7650-08 689523-01 689523-01 689523-01 18572-85 18572-85 18572-85 49223-01 49223-01 49223-04 687117-03 687117-03 687117-05

*A large bore shear bonnet is available for these sizes. sizes. For part numbers, see page 19. **Part numbers shown are for old style shear bonnets. For current model large bore shear bonnet part numbers, see page 19. ***13-5/8" through 16-3/4" and 20-3/4" through 26-3/4" require 24 for single and 48 for double. The 18-3/4" requires 32 for single and 64 for double. ****Required on all 11" 15,000 psi and 16-3/4" 10,000 psi BOPs with manual locking screws. +11" 15,000 psi requires 8 for single, 16 for double.

17

16-3/4" 3000 psi Model B __ 38944

16-3/4" 5000 psi Model B __

270900 2709 0000-14 14-0 -01 1 M517988 5940-09 0 05 05 93 93 00- 05 05 -1 -1 0 12469-52 18586-14 2127 21 2741 41-4 -44 4 __ __

38844 41408 38843-01 644231-() 689562 694085** 30274-06 41365-06** 30308-06 38901 695234 38847 038848-01 30273-06 30312-16 41366-16 5918-78-10 5918-34-10 2709 27 0900 0000-14 14-0 -01 1 M517988 5940-09 0 05 05 93 930 -0 -0 55- 10 10 12469-52 18586-14 2127 21 2741 41-4 -44 4 __

046613-04 30313-06 7 02 02 64 64 55- 46 46 -1 -1 1 2708811-01 710542 2 12 12 74 74 11- 45 45 702640-34-21 7026 70 2640 40-3 -333-21 21 3142 31 4233-21 21-1 -133-85 85 7026 70 2640 40-3 -355-41 41 7026 70 2640 40-4 -433-41 41 7 02 02 64 64 00- 34 34 -4 -4 1 7026 70 2640 40-2 -233-21 21 702585-31-00-4 702585-31 -00-44 4 17454-08 17454-09 11849 7650-08 689523-02 33186-85 49223-04 __

046613-04 30313-06 7 02 02 64 64 55- 46 46 -1 -1 1 2708811-01 710542 2 12 12 74 74 11- 45 45 702640-34-21 7026 70 2640 40-3 -333-21 21 3142 31 4233-21 21-1 -133-85 85 7026 70 2640 40-3 -355-41 41 7026 70 2640 40-4 -433-41 41 7 02 02 64 64 00- 34 34 -4 -4 1 7026 70 2640 40-2 -233-71 71 702585-31-00-54 702585-3100-54 17454-08 17454-09 11849 7650-08 689523-02 33186-85 49223-04 687117-05

__

38843-02 644231-() 614374-01 __ 30274-06 __ 30308-06 38901 __ 38946 38947 30273-07 30312-17 __ 5918-78-10 __

16-3/4" 10,000 - 26-3/4" 3000 psi WP U BOP Part Numbers 22

37

34

12

36

38

17

16

15

24

19

18

22

35

40

5

10

SD-5287

42

4

26

7

14

13

8

3

28

27

33

9

29

6

11

32

31

30

2

23

25

21

20

41

1

4

U BOP Exploded View

U Blowout Preventer Part Numbers Item No. 1 2 2A 3 4 5 5A 6 6A 7 8 8A 9 10 11 12 12A 13 1 3A 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43

Description Description

Qty Sgl

Qty Dbl

16-3/4" 10,000 psi Model II

__ Body 1 1 Intermediate Flange 2 4 691848 Intermediate Flange/Shear * Bonnet 2 4 691849 Ram Assembly 2 4 644231-() Piston, Operating 2 4 692828 Piston, Operating/Shear * Cylinder, Operating 2 4 41365-06 __ Cylinder, Operating/Shear Housing, Locking Screw 2 4 30308-06 Locking Screw 2 4 695234 __ Locking Screw/Shear Piston, Ram Change/Open 2 4 692756 Piston, Ram Change/Close 2 4 692759 Cylinder, Ram Change 4 8 30273-13 Bolt, Bonnet 8 16 30312-24 __ Bolt, Bonnet/Shear Stud, Loc king Screw H ous ing 16 32 5918-34-10 __ S tu d, L oc kin g S cr ew H ou sin g/ Sh ea r Nut, Locking Screw Housing 16 32 2709000-14-01 Check Valve, Plastic Packing 2 4 M517988 Screw, Plastic Packing 2 4 5940-09 P ip e Pl ug , Pl as tic Pa ck in g 2 4 0 05 93 0- 05- 10 Ring, Plastic Packing 2 4 12469-52 Ring, Plastic Energizing 2 4 18586-14 Se al Ring, Connect ing R od 2 4 212741-44 Ring Back-Up 4 8 21792-34 Seal, Bonnet 2 4 046613-04 Pin, Ram Guide 4 8 30313-06 O -R in g, O pe ra ti ng C yl in de r 4 8 7 02 64 5- 46 -1 1 O-Ring, Operating Piston Rod to Int Flg 2 4 2708811-01 Lip Seal, Operating Piston 2 4 710542 Seal Ring, Tail Rod 2 4 212741-45 O-R ing, Wiping 2 4 702640-34-21 O-Ring, Ram Change Piston to Body 4 8 702640-33-21 O-Ring, Ram Change Piston Rod to Int Flg 4 8 31423-21-13-85 O-Ring, Ram Change Cylinder to Int Flg 4 8 702640-35-41 O-Ring, Ram Change Cylinder to Bonnet 4 8 702640-43-41 O -R in g, R am C ha ng e P is to n 4 8 7 02 64 0- 34 -4 1 O-Ring, Bonnet Bolt Retainer 8 16 702640-24-51 Cap Screw, Int Flange to Bonnet 16*** 32*** 702585-31-00-72 Gland, Bleeder 2 4 17454-08 Plug, Bleeder 2 4 17454-09 Lifting Eye 2 2 11849 Packing, Plastic 10 20 7650-08 Washer 2 4 689523-02 Ring, Retainer 2 4 33186-35 Wear Ring, Operating Piston 2 4 49223-04 -   687117-05 Spacer, Shear****

18-3/4" 10,000 psi Model II __

20-3/4" 3000 psi Model II __

41458 __ 41459 644234-() 41460 __ 30274-13 __ 30308-09 41085 __ 40961 40960 30273-09 30312-23 __ 5919-38-10 __ 2709000-18-01 M517988 5940-09 0 05 93 0- 05 -10 12469-72 18586-19 212741-60 21793-40† 644197-05-00-01 30313-07 2 70 88 12 -0 1 41602-04-13-85 710543 212741-36-00-01 702640-34-51 702640-34-01 2010180-02 702640-43-51 702640-43-81 3 01 01 -8 3- 13 -8 5 702640-24-71 702585-36-00-76 17454-08 17454-09 11849 7650-08 689523-03 33186-01-04 49223-07 __

30911-01 41496-01** 30835-01 44256-() 690058 69 34 05 ** 30274-04 41365-04** 30308-04 30846 34233 30848 30849 30273-04 30312-10 4 13 66 -1 0 5918-76-10 38732-61-00-75 2709000-14-01 M517988 5940-09 0 05 93 0- 05 -1 0 12469-24 18586-01 212741-36-00-01 __

21-1/4" 2000 psi Model II __ 30911-01 41496-01** 30835-02 44256-() 690058 6 93 40 5* * 30274-04 41365-04** 30308-04 30846 34233 30848 30849 30273-04 30312-11 4 136 6- 11 5918-76-10 38732-61-00-75 2709000-14-01 M517988 5940-09 0 05 93 0- 05 -1 0 12469-24 18586-01 212741-36-00-01 __

__ __ 49955-01 49963-01 644240-() 49954-01 __ 30274-11 __ 30308-08 41085 __ 41064 41065 30273-11 30312-26 __ 5919-38-10 __

2709000-18-01 M517988 5940-09 0 05 930 -0 5- 10 12469-70 18586-18 11741-58 21793-39 046613-16 046613-16 46613-09 30313-04 30313-04 30313-07 7 02 64 0- 45 -5 1 7 02 64 0- 45 -5 1 7 02 64 0- 47 -0 1 18492-90 18492-90 30101-88-13-85 710538 710538 710544 212741-34-00-01 212741-34-00-01 212741-36-00-01 702640-33-71 702640-33-71 7 02640-34-51 702640-33-61 702640-33-61 702640-34-31 702640-34-11 702640-34-11 31423-52-13-85 702640-43-71 702640-43-71 702640-44-01 702640-43-91 702640-43-91 702640-44-21 7 02 64 0- 42 -5 1 7 026 40 -4 2- 51 7 02 64 0- 43 -1 1 702640-22-91 702640-22-71 702640-24-71 702585-28-00-50 702585-28-00-50 702585-36-00-93 17454-08 17454-08 17454-08 17454-09 17454-09 17454-09 11849 11849 11849 7650-08 7650-08 7650-08 689523-01 689523-01 2353-46 18572-85 18572-85 33186-92 49223-10 49223-10 49223-11 __ 687117-03 687117-03

*A large bore shear bonnet is available for these sizes. For part numbers, see page 19. **Part numbers shown are for old style shear bonnets. For current model large bore shear bonnet part numbers, see page 19  ***13-5/8" through 16-3/4" and 20-3/4" through 26-3/4" require 24 for single and 48 for double. The 18-3/4" requires 32 for single and 64 for double. ****Required on all 11" 15,000 psi and 16-3/4" 10,000 psi BOPs with manual locking screws. †Requires 2 for single and 4 for double.

18

21-1/4" 5000 psi Model II

21-1/4" 10,000 psi Model II __ 615369-01 615418-01 41357 644240-() 41356 41374** 30274-11 41365-11** 30308-08 41085 __ 41064 41065 30273-11 30312-21 41366-21 5919-38-10 __ 2709000-18-01 M517988 5940-09 0 05 93 0- 05 -1 0 12469-70 18586-18 11741-58 21793-39 46613-09 30313-07 7 02 64 0-4 7- 01 30101-88-13-85 710544 212741-36-00-01 702640-34-51 702640-34-31 31423-52-13-85 702640-44-01 702640-44-21 7 02 64 0- 43 -1 1 702640-24-81 702585-36-00-93 17454-08 17454-09 11849 7650-08 2353-46 33186-92 49223-08 __

26-3/4" 3000 psi Model II __ __ 38327 38326 44260-() 614376-01 __ 30274-05 __ 30308-05 34233 __ 38174 38324 30273-05 30312-13 __ 5918-76-10 __ 2709000-14-01 M517988 5940-09 0 05 93 0- 05 -1 0 12469-24 18586-01 212741-36-00-01 __ 46613-08 30313-05 7 02 64 0- 45 -5 1 18492-90 710538 212741-34-00-01 702640-33-71 702640-34-41 702640-34-91 702640-43-91 702640-44-11 7 02 64 5- 42 -9 1 702640-23-91 702585-31-00-70 17454-08 17454-09 11849 7650-08 689523-01 18572-85 49223-10 __

Large Bore Shear Bonnets

SD-10816

12A** 2A 24A 26A 5A

42A

Large Bore Shear Bonnet Assembly (See pages 16, 17 and 18 for items not called out on this drawing.)

3A

Large Bore Shear Bonnet Part Numbers Item No.

11" 3000 psi Model II

Description (2 Required per Cavity)

11" 5000 psi Model II

11" 10,000 psi Model II

11" 15,000 psi Model 79

13-5/8" 3000 psi Model 11

13-5/8" 5000 psi Model II

13-5/8" 10,000 psi Model II

13-5/8" 15,000 psi Model B

16-3/4" 5000 psi Model B

16-3/4" 10,000 psi Model II

20-3/4" 3000 psi Model II

21-1/4" 2000 psi Model II

*

Bonnet Assembly (Right)

615195-01

615194-01 614596-01

615419-01

615196-01

615191-01

614498-01

615540-01

615530-01

615537-01

615526-01

615525-01

*

Bonnet Assembly (Left)

615195-02

615194-02 614596-02

615419-02

615196-02

615191-01

614498-02

615540-02

615530-02

615537-02

615526-02

615525-02

2A

Intermediate Flange/Shear

615188-01

615188-01 615188-01

615459-01

615192-01

615192-01

614766-01

615538-01

615528-01

615535-01

615523-01

615523-01

3A

Bonnet/Shear

615189-03

615189-02 615189-01

615640-01

615143-02

615143-01

614772-01

615448-01

615527-01

615534-01

615522-01

615522-02

5A

Operating Piston/Shear

645249-01

645249-01 645249-01

615457-01

615209-01

615209-01

614760-01

615539-01

615529-01

615536-01

615524-01

615524-01

70264045-81

70264045-81

7 0264045-81

702 64045-81

702645 46-51

70264546-51

70264546-51

702 64045-81

70264045-81

24A

O-Ring, Int Flg to Bonnet Lip

70264045-51

26A

Lip Seal, Operati ng Piston/Shear

710586

42A

Wear Ring, Operating Piston/Shear 49223-15

70264045-51

70264045-51

710586

710586

710542

710542

710542

710542

710588

710588

710588

710542

710542

49223-15

49223-15

49223-04

49223-04

49223-04

49223-04

49223-17

49223-17

49223-17

49223-14

49223-14

*Two shear bonnet assemblies, one right and one left, are required per cavity. The shear bonnet assembly consists of all items shown on the illustration. **See pages 16, 17 and 18 for bonnet bolt part numbers. 7

10

17 15 23

13

11

9

16

2

SD-10803-99

5 6 1

12

14

4

3

Tandem Booster Exploded View

Tandem Booster Part Numbers

Tandem Boosters for U BOPs A BOP equipped with tandem boosters can deliver increased shearing force while not increasing the wear and tear on the packers. Tandem boosters approximately double the force available to shear pipe. Since the tailrod of the tandem booster has the same stroke as the BOP's operating piston, the standard shear locking mechanism can be installed on the outside end of the booster. For information on lock screws and the required spacers, see pages 16, 17 and 18. For information concerning applications where a tandem booster is required, consult your Cameron representative.

8

Item No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 26 27

7-1/16" 11" 11" 15,000 psi 3000, 5000 3000, 5000 13-5/8" 3000, 5000 10,000 and 15,000 psi* 5,000 and 10,000 psi and 10,000 psi Qty Part No. Qty Part No. Qty Part No. Cylinder 1 644959-01 2 645113-01 2 645113-03 Cylinder Head 1 644960-01 2 645171-01 2 645171-03 Piston 1 644961-01 2 2032370-02 2 645172-03 Tailrod 1 644962-01 2 645173-01 2 645173-03 Adapter Plate 1 644963-01 2 645115-01 2 645115-03 Screw, SDC HD Cap 8 18541-34 16 18542-13 16 18542-14 O-Ring 1 702640-24-91 2 702640-36-11 2 702645-37-11 Seal Ring 1 710541 2 712352 2 710538 Wear Ring, Oper. Piston 1 49223-03 2 49223-21 2 49223-01 Filter, Muffler 1 710621 2 710621 2 710417 Seal, Lip 1 11741-32 2 212741-33-00-01 2 212741-34-00-01 Seal Ring 1 710620 2 712351 2 710419 Wear Ring, Cylinder 1 644443-02 2 644443-03 2 645215-01 Seal Ring 1 705955 2 712445 2 710418 O-Ring 1 702640-33-11 2 702640-33-51 2 702640-33-71 Alignment Ring 1 645116-02 2 645116-01 2 645116-03 __ Pipe Plug 1 2 201018 2 005930-05-10 __ Connector, Tubing 1 19624-01 2 4 204887-10-06-57 Cross 1 6347-08 1 675029-52 1 675029-23 __ Nippl e, Pipe Reg. 2 1 685902-07-00-30 1 685902-07-00-30 Hose Assembly 2 711010 2 2708021 2 711374 __ Connector, Tubing 1 204888-08-05-56 2 204887-10-05-56 __ __ Stud, Double End 16 2010189-03 __ C on nec to r, T ub in g 1 50 11 33 -7 1- 22 2 20 48 87 -1 0-0 6- 56 __ __ Adapter, Pipe 2 675029-01 Description Description

*The 7-1/16" tandem booster is a part of the standard land and platform shear configuration for 7-1/16" U BOPs.

19

20-3/4" 3000 psi and 21-1/4" 2000 psi Qty Part No. 2 645113-04 2 645171-03 2 645172-03 2 645173-04 2 645115-03 16 18542-14 2 702645-37-11 2 710538 2 4 9223-01 2 710417 2 212741-34-00-01 2 710419 2 6 45215-01 2 710418 2 702640-33-71 2 645116-03 2 005930-05-10 4 204887-10-06-57 2 675029-23 1 685902-07-00-30 2 711374 __ __ __ __ -

U and U II BOP Ram Hang-Off Weights and Shear Requirements Hang-Off Weights

Hang-Off Weights

Hang-off weights are estimated capacities with hardened top corners of the hang-off rams. This enables the rams to dig into the tool joint and provide superior hang-off capacity while still meeting NACE requirements. For variable bore rams (VBRs) and FLEXPACKER rams, hang-off weights up to 600,000 lbs on hang-off rams with a maximum pipe diameter of 5" are allowable.

Pipe Size 3-1/2" 4-1/2" 5" 6-5/8"

Pipe Rams 425,000 lbs 550,000 lbs 600,000 lbs 600,000 lbs

Drill Pipe Shearing Requirements The minimum shearing configurations needed for each size U BOP to meet the requirements of the proposed second edition of API 16A are listed in the following chart. Each shearing configuration is capable of shearing the corre-

sponding pipe at a closing pressure equal to or less than 2800 psi. For further information on shearing requirements for different pipe sizes and grades, contact your Cameron representative.

Minimum Shearing Configurations for the U BOP API Designated Size 7-1/16" 11" 11" 11" 13-5/8" 13-5/8" 13-5/8" 16-3/4" 18-3/4" 20-3/4" 21-1/4" 21-1/4"

Ram Type SBR SBR DS SBR SBR DS SBR SBR SBR SBR SBR SBR

Pressure Rating (psi) All 10,000 and Lower 10,000 and Lower 15,000 and Higher 10,000 and Lower 10,000 and Lower 15,000 and Higher All All 3000 and Lower 3000 and Lower 5000 and Higher

Pipe OD (In.) 3-1/2 5 5 5 5 5 5 5 5 5 5 5

Pipe Lb/Ft 13.3 19.5 19.5 19.5 19.5 19.5 19.5 19.5 19.5 19.5 19.5 19.5

Note: See page 19 for a complete list of part numbers for the large bore shear bonnets and tandem boosters.

20

Pipe Grade S E E G G G S S S G G S

Shearing Configuration Shear Bonnets with Tandem Boosters Shear Bonnets with Tandem Boosters Large Bore Shear Bonnets Large Bore Shear Bonnets Shear Bonnets with Tandem Boosters Large Bore Shear Bonnets Large Bore Shear Bonnets Large Bore Shear Bonnets Standard Bonnets Shear Bonnets with Tandem Boosters Shear Bonnets with Tandem Boosters Standard Bonnets

U BOP Pipe Rams Pipe rams are available for use in Cameron U BOPs to fit all commonly used sizes of tubing, drill pipe, drill collar or casing within the ranges in the charts on this page and the next page. Cameron pipe rams include the following features: • Cameron pipe rams are self-feeding and incorporate a large reservoir of packer rubber to ensure a long-lasting seal under all conditions. • Ram packers lock into place and are not dislodged by well flow. • All Cameron pipe rams are suitable for H 2S service per NACE MR-01-75. • CAMRAM™ top seals are standard for all U BOP pipe rams from 7-1/16” through 18-3/4” sizes. Packer part numbers beginning with 644xxx indicate the CAMRAM lipped-plate design. All other packers use standard elastomer material and reinforcement plates. • CAMRAM 350™ packers and top seals are available for high temperature service and for service in which concentrations of H 2S are expected.

Top Seal

SD-10825

Packer

U BOP Pipe Ram

Ram

U BOP Pipe Ram Part Numbers Pipe Size

7-1/16" U BOP 3000, 5000, 10,000, and 15,000 psi WP Top Seal 644214-01-00-01 Assembly

Blind

Ram

Packer

11" U BOP 3000, 5000 and 10,000 psi WP Top Seal 644217-01-00-01 Assembly

Ram

Packer

11" U BOP 15,000 psi WP Top Seal 2010453-01 Assembly

Ram

Packer

13-5/8" U BOP 3000, 5000 and 10,000 psi WP Top Seal 644223-01-00-01 Assembly

Ram

Packer

1.050"

644504-01 644500-01 644215-01-00-01 644219-01 44118-01   __ __ 644504-02 644501-01 644215-02

644218-01-00-01 644222-01 44121-01 __ __ __

1.315"

644504-03 644501-02 644215-03

44233-25

44118-07

19243-08

1.660"

644504-04 644501-03 644215-04

44233-02

44118-02

19243-06

1.900"

644504-05 644501-04 644215-05-00-01 44233-03

44118-03

19243-05

2.062"

644504-06 644501-05 644215-06

44118-04

19243-04

2.375"

644504-07 644501-06 644215-07-00-01 644219-06 44118-05

2.875"

644504-08 644501-07 644215-08-00-01 644219-07 44118-06

3.500"

644504-09 644502-01 644215-09-00-01 644219-08 644835-01 644218-08-00-01 644222-07 644753-01 2010454-07*

644225-08 644738-01

644224-08-00-01

4.000"

644216-11 644503-02 644215-11-00-01 644219-10 44119-02

644225-10 44149-02

644224-10-00-01

4.500"

644225-11 644738-02

644224-11-00-01

4.750"

644216-12 644503-03 644215-12-00-01 644219-11 644835-02 644218-11-00-01 644222-09 644753-02 2010454-09* __ __ __ __ __ __ 44233-12 44119-04 19374-04

644225-13 44150-01

644224-13

5.000"

644216-14 644503-05 644215-14-00-01 644219-14 644835-03 644218-14-00-01 644222-10 644753-03 2010454-10*

644225-14 644738-03

644224-14-00-01

5.500"

644216-15 644503-06 19474-06 __ __ __

690808-12 __

644225-16 44150-03 __ __

644224-16-00-01 __ 31215-09

5.750'

44233-04

644219-16 44120-01

644221-01 __

644225-01 44147-01 __ __

644224-01-00-01 __

__

644225-02 44148-06

644224-02

644222-02 44121-02

644221-02

644225-03 44148-05

644224-03

644222-03 44121-03

644221-03

644225-04 44148-07

644224-04

644222-04 44121-04

644221-04

644225-05 44148-03

644224-05

644218-06-00-01 644222-05 44121-05

2010454-05*

644225-06 44148-01

644224-06-00-01

644218-07-00-01 644222-06 44121-06

2010454-06*

644225-07 44148-02

644224-07-00-01

644218-10

644218-16

__

44234-10

__

44122-04

44234-13   __

44123-01 __

690808-09

44233-23

44120-10

644218-17

6.000"

__

__

__

44233-16

44120-02

19375-02

44234-14

44123-02

690808-13

44244-13

6.625"

__

__

__

44233-17

644835-04 19375-03

44234-15

44123-03

690808-14

644225-18 644738-04-00-02 644224-18-00-01

7.000"

__

__

__

44233-18

44120-04

19375-04

44234-16

44124-01

2010454-14

644225-19 44151-01

644224-19-00-01

7.625"

__

__

__

44233-19

44120-05

644224-20

7.750"

__

44233-22

44120-09

690808-16 __

44151-02

__

44124-02 __

44244-15

__

644210-21-00-01 44234-17 __ 19375-11

44244-25

44151-06

19506-09

8.625"

__

__

__

__

44244-16

44151-03

644224-22

__

__

19375-06 __

__

__

44120-06 __

__

9.000"

44233-20 __

__

__

__

44244-24

44151-04

19506-06

9.625"

__

__

__

__

__

__

__

__

__

644225-24 44151-05

644224-24-00-01

10.750"

__

__

__

__

__

__

__

__

__

44244-18

44152-01

038372-00-00-01

11.750"

__

__

__

__

__

__

__

__

__

44244-26

614208-01

614227-01

__

__

44150-04

3.500" Aluminum 644216-10 644503-01 19474-07

44233-08

44119-06

19374-06

__

44244-20

44149-04

31215-16

4.500" Aluminum 644216-13 644503-04 19474-08 __ __ __ 5.000" Aluminum

44233-11

44119-07

19374-07

__

__

__

44244-10

44149-05

31215-17

19374-09

__

__

__

44244-32

44150-08

31215-27

44233-24

44119-08

*After depletion.

21

Part Numbers for U BOP Pipe Rams Pipe Size Blind

13-5/8" U BOP 15,000 psi Top Seal 644226-01 Assembly Ram 4 4143-01 __

Packer

644227-01 __

16-3/4" U BOP 3000, 5000 and 10,000 psi Top Seal 644229-01-00-01 Assembly Ram Packer 644231-01 __

4 417 9-01 __

18-3/4" U BOP 10,000 psi Top Seal 644232-01-00-01 Assembly Ram Packer

1.050"

644 228-01 __

1.315"

__

__

__

__

__

__

__

__

__

__

__

__

1.660"

__

__

__

__

__

__

__

__

__

__

__

__

1.900"

__

__

__

__

__

__

__

__

__

__

__

__

__

__

__

644230-02 __

 

64 4234-0 1 __

44184-01 __

644233 -01 __

4 4262-0 1 __

44214-01 __

20108 51-19 __

2.062"

44243-02

44144-03

40910-20

644231-02 __

2.375 "

644 228-03

4 4144-01

644227-03

644231-03

4418 0-01

64423 0-03

442 54-02

44185-01

41856-01

442 62-02

44215-01

40962-01

2.875 "

644 228-04

4 4144-02

644227-04

644231-04

4 418 0-02

64423 0-04

442 54-03

44185-02

644233-03

44 262-03

44215-02

40962-02

3 .5 00 "

6 44 22 8-0 5

64 47 39 -0 1

6 44 22 7- 05

6 44 23 1- 05

6 44 74 0-0 1

6 44 23 0-0 5

6 44 23 4-0 4

64 47 41 -0 1

44 23 3-0 4

4 42 62 -0 4

64 47 43 -0 1

40 96 2-0 3

4.000 "

644 228-07

4 4144-06

644227-07

644231-06

4418 1-02

64423 0-06

442 54-06

44185-05

41856-04

442 62-06

44215-05

40962-04

4.500 "

644 228-08

644739-02

6 44227-08

644231-07

6447 40-02

6 442 30-07

44 254-07

644741-02

41856 -05

4 4262-0 7

6 44743-02

4096 2-05

4.750"

44243-11

44144-09

40910-07

644231-08

4 4181-04

644230-08

44254-09

44185-08

41856-06

44262-09

44215-08

40962-06

5.000"

644228-11

644739-03

644227-11-00-01 644231-09

644740-03

644230-09

644234-10

644741-03

644233-10

44262-10

644743-03

2010851-07

5.500" 5.750'

44243-12 __

44145-03 __

40910-08 __

644231-10 __

4 4181-06 __

644230-10 __

44254-11 __

44185-10 __

41856-08 __

44262-11 __

44215-10 __

40962-08 __

6.000"

44243-14

44145-04

40910-09

644231-11

4 9291-01

644230-11

44254-13

44185-12

41856-09

44262-13

44215-12

40962-09

6.625 "

442 43-15

644739-04

40910-10

644231-12

4 9291 -02

64423 0-12

442 54-14

044185-13

4 1856-10

442 62-14

0 44215-13

2 01085 1-10

7.000 "

442 43-16

44146-01

644227-15

644231-13

49291 -03

64423 0-13

442 54-15

44185-14

41856-11

442 62-15

44215-14

40962-11

7.625 "

442 43-17

44146-02

644227-16

7.750"

44243-22

44146-07

40910-23

644231-14 __

49291 -04 __

64423 0-14 __

442 54-16 __

44185-15 __

41856-12 __

442 62-16 __

44215-15 __

40962-12 __

8.625"

44243-18

44146-03

40910-13

644231-15

4 9291-06

644230-15

44254-17

44185-16

41856-13

44262-17

44215-16

40962-13

9.000"

44243-19

44146-04

40910-14

644231-16

4 9291-07

644230-16

44254-18

44185-17

41856-14

44262-18

44215-17

40962-14

9.625 "

442 43-20

44146-05

644227-20

644231-17

49292 -01

64423 0-17

442 54-19

44185-18

41856-15

442 62-19

44215-18

40962-15

10.75 0"

442 43-21 __

44146-06 __

40910-22 __

644231-18

49292 -02

64423 0-18

40962-20

644230-19

41856-20 __

44216-01

49292-03

44185-21 __

442 62-20

644231-19

442 54-21 __

44262-21

44216-02

40962-21

11.750"

44180-03 __

6442 30-01 __

21-1/4" U BOP 5000 and 10,000 psi Top Seal 2010939-01 Assembly Ram Packer

13.375"

__

__

__

13.625"

__

__

__

6 44 23 1- 20 __

4 92 92 -0 4 __

6 44 23 0- 20 __

4 42 54 -2 2 __

4 41 85 -2 0 __

4 18 56 -2 2 __

13.750"

__

__

__

__

__

__

__

__

4 42 16 -0 3

2 01 08 51 -2 2

__

044216-05 __

40962-24 __

__

__

__

__

__

__

__

__

44262-23

44216-04

40962-23

3.500" Aluminum

44243-06

44144-05

40910-16

__

__

__

44254-05

44185-04

41856-16

44262-05

44215-04

40962-16

4.500" Aluminum

44243-08 __

44144-08 __

40910-05 __

__

__

__

__

__

__

44254-08 __

44185-07 __

41856-17 __

44262-08 __

44215-07 __

40962-17 __

16.000"

5.000" Aluminum

__

4 42 62 -2 2 44262-24 __

21-1/4" Bore 2000 psi 20-3/4" Bore 3000 psi Top Seal 19514-00-00-01

Pipe Size

26-3/4" Bore 2000 and 3000 psi Top Seal 34200

Assembly

Ram

Packer

Assembly

Ram

Packer

44256-01 __

44149-01 __

2010583-03 __

44260-01 __

044209-01 __

34201-20 __

__ __

__ __

__ __

__ __

__ __

__ __

__ __ __

__ __ __

__ __ __

__ __

__ __

__ __

__

__

__

44260-02 44260-03

614017-01 614017-02

34201-01 34201-02

3.500" 4.000" 4.500"

44256-02 44256-03 44256-04

645328-01 44192-02 645328-02

2010583-22 31228-04 31228-05

4.750" 5.000"

44256-05 44256-06

44192-04 645328-03

31228-06 2010583-07

44260-04 44260-05 44260-06 __

614018-01 614018-02 614018-03 __

34201-03 34201-04 34201-05 __

44260-07

614018-04

34201-06

5.500" 5.750'

44256-07 __

44193-02 __

2010583-08-01 __

44260-08 __

614018-05 __

34201-07 __

6.000" 6.625"

44256-08 44256-09

44193-03 645328-04

31228-09 2010583-10-01

44260-09 44260-10

614019-01 614019-02

34201-08 34201-09

7.000" 7.625" 7.750"

44256-10 44256-11 __

44193-05 44193-06 __

31228-11 31228-12 __

8.625" 9.000" 9.625"

44256-13 44256-14 44256-15

44193-08 44193-09 44193-10

31228-14 31228-15 31228-16

44260-11 44260-12 __ __

614019-03 614019-04 __ __

34201-10 34201-11 __ __

44260-14 44260-15

614019-06 614020-01

34201-13 34201-14

10.750" 11.750"

044256-16 44256-17

44194-01 44194-02

31228-17 31228-18

44260-16 44260-17

614020-02 614020-03

34201-15 34201-16

13.375" 13.625"

44256-18 44256-21

44194-03 44194-05

2010583-04-01 31228-24

13.750"

44256-19

44194-04

31228-19

44260-18 __ __

614020-04 __ __

34201-17 __ __

16.000" 18.625" 20.000"

44256-20 44256-22 __

44195-01 614459-01 __

31228-21 31228-25 __

44260-19 __

614021-01 __

34201-18 __

44260-20

614021-02

34201-19

Blind 1.050" 1.315" 1.660" 1.900" 2.062" 2.375" 2.875"

22

U BOP Shearing Blind Rams • Cameron SBRs can cut pipe numerous times without damage to the cutting edge. • The single-piece body incorporates an integrated cutting edge. • CAMRAM™ top seals are standard for all U BOP shearing blind rams through 18-3/4". Part numbers beginning with 644xxx indicate CAMRAM. All other top seals are standard elastomer material. • H 2S SBRs are available for critical service applications and include a blade material of hardened high alloy suitable for H 2S service. • The Cameron shearing blind ram has a single-piece body with an integrated cutting edge.

Cameron shearing blind rams shear the pipe in the hole, then bend the lower section of sheared pipe to allow the rams to close and seal. Shearing blind rams can be used as blind rams during normal drilling operations. The DS shearing blind ram can cut larger diameter tubulars or multiple tubing strings regardless of their orientation to the centerline of the ram. A blade seal between the upper and lower faces eliminates the need for moving pipe after shearing. Features include of shearing blind rams and DS rams include: • Large frontal area on the blade face seal reduces pressure on the rubber and increases service life.

6

6

13

10

12

15

8

7

5

6

1

5 7

1

2

2

4 SD-9348

4 3

4 11

4

1

14

3

SD-10815

5

DS Shearing Blind Ram

9

SD-10827

3

7

U BOP H2S Shearing Blind Ram

U BOP Shearing Blind Ram

U BOP H2S Shearing Blind Ram Part Numbers BOP Bore Size and Working Pressure (psi)

1 Upper Ram Subassembly

13-5/8" 5000 and 10,000 644781-01 18-3/4" 10,000

2 Ram

3 Blade Packer

4 Packer

5 Packer

6 Top Seal

7 Blade Insert

8 Set Screw

9 Lower Ram Subassembly

644780-01 644435-01-00-01 46751-01-00-01 46752-01-00-01 644223-01-00-01 644581-01-00-01 644582-01 644781-02

2010186-01 2010187-01 2010192-01

2010191-01

2010190-01

2010193-01

2010182-01

10 Ram

11 Packer

644780-02

644524-01 2010186-02

12 Packer

13 Top Seal

14 Blade Insert

46751-01-00-01 46752-01-00-01 644223-01-00-01 644581-02-00-01

2010188-01 2010191-01

2010190-01

2010193-01

2010183-01

Part number 15 for both sizes is 200231.

U BOP DS Shearing Blind Ram** BOP Bore Size and Working Pressure

1 Upper Ram Subassembly

2 Ram

3 Blade Seal

4 Packer

Description and Item Number 5 6 7 Packer Top Seal Lower Ram Subassembly

8 Ram*

9 Packer*

10 Packer*

11" 500 0 and 10,000 psi

6450 78-01

6 45079-01

645031-02

6 45080-02

645080-01

64421 7-02

645078-02

645079-02

645080-01

6 45080-02

13-5/8" 5000 and 10,000 psi

645026-01

645027-01-00-04

645031-01

645494-01

645494-02

645033-01

645026-02

645027-02-00-04

645494-01

645494-02

*Part of lower ram subassembly, item 7. **Part numbers listed are the primary base numbers. Call your Cameron representativ e for part numbers that apply to API 16A specifications.

U BOP Shearing Blind Ram Part Numbers BOP Bore Size and Working Pressure

1 Upper Ram Subassembly

2 Ram

7-1/16" 5000, 10,000 and 15,000 psi

46792-01-00-03

46210-01-00-04

11" 5000 and 10,000 psi

49392-01-00-02

11" 15,000 psi 13-5/8" 5000 and 10,000 psi 13-5/8" 15,000 psi

3 Blade Packer __

4 Packer

Description and Item Number 5 6 7 Packer Top Seal Lower Ram Subassembly

8 Ram*

9 Packer*

46212-01-00-04

49347-01-00-01

10 Packer* __

49358-01

49358-02-00-01 644214-01-00-01 46792-02

49009-01-00-02 2010462-04

46751-04

46752-04

644217-01-00-01 049392-02-00-02 049010-01-00-02 46751-04

46752-04

614297-01

614275-01

2010462-04

2010460-07

2010461-07

2010453-01

614274-01

2010460-07

2010460-07

46748-01

46749-01

644435-01-00-01 046751-01-00-01 046752-01-00-01 644223-01-00-01 46748-02

46750-01

046751-01-00-01 046751-01-00-01

614004-01

614002-01

644435-01-00-01 46751-05

614003-01

46751-05

46752-05

644226-01

614297-02

614004-02

46752-05

1 6-3 /4" 50 00 psi

4 67 66- 01

49 006 -0 1

4 69 10- 03

46 75 1-0 3-0 0-0 1 467 52- 03 -00 -01

6 442 29- 01 -00 -01 46 766 -02

4 900 7- 01

46 751 -03 -0 0-0 1 46751-03-00-01

1 6-3 /4" 10 ,0 00 p si

4 67 73- 01

46 77 4-0 1

469 10- 03

46 75 1-0 3-0 0-0 1 467 52 -03 -00 -01

6 442 29 -01 -00 -01 46 773 -02

4 67 75- 01

04 675 1- 03- 00- 01  46751-03-00-01

18-3/4" 10,000 psi

46776-01

46777-01

46910-02

20-3/4" 3000 psi

46783-01

46784-01

__

615235-01-00-01

46751-02

__

19514-00-00-01 46783-02

46785-01

615247-01-00-01 615247-02-00-01

21-1/4" 2000 psi

46783-01

46784-01

__

615235-01-00-01

__

19514-00-00-01 46783-02

46785-01

615247-01-00-01 615247-02-00-01

21-1/4" 5000 psi

49983-01

49981-01

46910-05

46751-06

46752-06

645478-01

49983-02

49982-01

46751-06

46752-06

21-1/4" 7500 and 10,000 psi

46788-01

49012-01

46910-05

46751-06

46752-06

645478-01

46788-02

49011-01

46751-06

46752-06

*Part of lower ram subassembly, item 7.

23

46752-02

644232-02

46776-02

46778-01

46751-02

46752-02

U BOP DSI and DVS Shear Rams Dual string interlocking (DSI) shear rams and double V shear (DVS) rams are also available for the U BOP. The interlocking feature of these rams provides the capability of shearing wireline and braided cable with zero tension in the line, while still maintaining a seal. The blades are interlocked by using pockets in the lower ram and arms on the upper ram to prevent any gap between blade surfaces. DSI rams are similar to standard DS shear rams except for the interlock

feature. DSI shear rams are capable of shearing tubing, small pipe, braided cable, slickline and solid sinker bar. DVS rams are similar in design to the standard shearing blind rams except that both blades are V shaped and interlocked. The DVS rams are capable of shearing tubing, small pipe , braided cable and slickline.

Top Seal

Top Seal

Upper Ram Body

Upper Ram Body

Side Packer Upper Shear Ram SD11318-99

SD11320-99

Lower Ram Body

Lower Ram Body

Blade Seal Upper Shear Ram

Side Packer Lower Shear Ram

Blade Packer

Side Packer

Dual String Interlocking (DSI) Shear Rams

Double V Shear (DVS) Shear Rams

U BOP Variable Bore Rams VBR Packer

Top Seal

One set of Cameron variable bore rams seals on several sizes of pipe or hexagonal kelly. Variable bore rams are available in the size ranges listed in the chart below. All rams listed are suitable for H 2S service per NACE MR-01-75. CAMRAM top seals are standard for all U BOP variable bore rams. CAMRAM packers are available in most sizes. Packer part numbers beginning with 644xxx indicate CAMRAM. All other packers are standard elastomer material. The variable bore ram packer contains steel reinforcing inserts similar to those in the Cameron annular BOP packer. The inserts rotate inward when the rams are closed so the steel provides support for the rubber which seals against the pipe.

SD-5129

U BOP Variable Bore Ram

U BOP Variable Bore Ram Part Numbers BOP Size and Working Pressure 7-1/16" 3000, 5000, 10,000 and 15,000 psi

Pipe Size Range

Ram Subassembly

Ram Body

3-1/2" to 2-3/8"

615066-01

615065-01

Packer 614616-02

Top Seal 644214-02-00-01

7-1/16” 3000, 5000, 10,000 and 15,000 psi

4” - 2-7/8”

644901-01

614605-01

614616-02

644214-02-00-01

11” 3000, 5000 psi

5” to 2-7/8”

645360-01

644836-01

644926-01-00-01

644217-01-00-01

11" 3000, 5000, 10,000 psi

5" to 3-1/2"

645360-01

644836-01

644926-01-00-01

644217-01-00-01

11" 15,000 psi

5" to 2-7/8"

614456-01

644754-01

644931-01

2010453-02

13-5/8" 3000, 5000 and 10,000 psi

7" to 4-1/2"

46675-01

46671-01

644924-01-00-02

644223-02-00-01

13-5/8" 3000, 5000 and 10,000 psi

5" to 2-7/8"

645166-01

644744-01

645089-01

644223-02-00-01

13-5/8" 15,000 psi

7" to 5"

614104-01

614146-01

644924-02

644226-02

13-5/8" 15,000 psi

5" to 3-1/2"

614129-01

644745-01

644921-01

644226-02

16-3/4" 5000 and 10,000 psi

7" to 3-1/2"

46676-01

46672-01

644920-01-00-01

644229-01-00-01

16-3/4" 10,000 psi (only)

5" to 2-7/8"

49410-01

644746-01

645128-01-00-01

644229-01-00-01

18-3/4" 10,000 psi

7-5/8" to 3-1/2"

46677-01

46673-01

644927-01

644232-03-00-01

24

FLEXPACKERS for U BOPs The Cameron FLEXPACKER ram is the latest development in multiple-bore sealing. Each FLEXPACKER ram is designed to close and seal around several diameters of tubing and pipe. These packers can be used in existing Cameron BOPs. Features include: • Stacks of metal inserts bonded into the elastomer, move radially in the elastomer as the BOP rams are closed. • As rams are energized, the proper set of metal inserts is forced against the pipe. The top plate of the packer fits the largest diameter of pipe.

FLEXPACKER Sizes and Part Numbers BOP Size and Description 11" 3000, 5000 and 10,000 psi

Pipe Size Diameters

Packer Part No.

Top Seal Part No. 644217-01-00-01

2-3/8" to 3-1/2"

2010123-01

13-5/8" 3000, 5000 and 10,000 psi 2-3/8" to 3-1/2"

2010113-01

644223-01-00-01

18-3/4" 10,000 psi

2-7/8" to 5"

645346-01

644232-04

20-3/4" 3000 psi

5" to 7"

645353-01

19514-00-00-01

21-1/4" 2000 psi

5" to 7"

645353-01

19514-00-00-01

SD-10315

FLEXPACKER

CAMRAM 350 Packers and Top Seals for U BOPs CAMRAM 350 U BOP pipe ram packers and top seals are available for applications which require high temperature capabilities and greater H 2S resistance than standard CAMRAM packers and top seals. CAMRAM 350 is available in all U BOP sizes in which standard CAMRAM packers and top seals are offered. At present, only pipe sizes (up to 6-5/8") are manufactured.

CAMRAM 350 Top Seal

SD-7786

CAMRAM 350 Packer

U BOP CAMRAM 350 Packer and Top Seal

U BOP CAMRAM 350 Part Numbers Pipe Size (In.)

7-1/16" 3000-15,000 psi Top Seal: 644701-01

11" 3000-10,000 psi Top Seal: 644703-01

11" 15,000 psi Top Seal: 644705-01

13-5/8" 3000-10,000 psi Top Seal: 644707-01

Packer

Packer

Packer

Packer

Packer

Packer

Packer

Blind

644700-01

644702-01

644704-01

644706-01

644708-01

2.375

644700-07

644702-06

644704-05

644706-06

644708-03

644710-01 __

644712-01 __

2.875

644700-08

644702-07

644706-07

644708-04

644710-04

__

3.500

644702-08

644706-08

644708-05

644710-05

4.000

644700-09 __

644704-06 __

644702-10

__

644706-10

644710-06

4.500

__

644702-11

644704-09

644706-11

644708-07 __

644712-04 __

644710-07

__

5.000

__

644702-14

5.500

__

644702-16

644704-10 __

644706-16

644708-11 __

644710-09 __

644712-10 __

644706-14

25

13-5/8" 16-3/4" 15,000 psi 3000-10,000 psi Top Seal: 644709-01 Top Seal: 644711-01

18-3/4" 10,000 psi Top Seal: 644713-01

U BOP Rams for Multiple Completions Non-sealing centralizing rams and companion subsea dual rams and packers for use with two strings of the same diameter are available for the

U BOP. Also available are offset bore rams for 7-1/16" and 11" BOPs. Contact a Cameron representative for more information.

U Blowout Preventer Offset Bore Ram Part Numbers Preventer Size (In.)

Tubing Size (In.)

Actual Centerline Offset

7-1/16

1.315

1-3/4"

7-1/16

1.660

1-3/4"

7-1/16

1.900

7-1/16 7-1/16

Offset Range (In.)

Ram Assembly

Right-Hand Ram (1 Reqd)

Left-Hand Ram (1 Reqd)

Right-Hand Packer (1 Reqd)

Left-Hand Packer (1 Reqd)

Top Seal (2 Reqd)

1-3/8 to 1-7/8

44229-01

44108-05

44109-05

21153-07

21154-07

644214-01-00-01

1-3/8 to 1-7/8

44229-02

44108-03

44109-03

21153-04

21154-04

644214-01-00-01

1-3/4"

1-3/8 to 1-7/8

44229-03

44108-01

44109-01

21153-01

21154-01

644214-01-00-01

2-1/16

1-3/4"

1-3/8 to 1-7/8

44229-04

44108-01

44109-01

21153-02

21154-02

644214-01-00-01

2-3/8

1-3/4"

1-3/8 to 1-7/8

44229-05

44108-02

44109-02

21153-03

21154-03

644214-01-00-01

7-1/16

2-7/8

1-3/4"

1-3/8 to 1-7/8

44229-06

44108-04

44109-04

21153-05

21154-05

644214-01-00-01

11

1.660

2"

1-25/32 to 2-7/16

44238-01

44128-04

44129-04

21157-05

21158-05

644217-01-00-01

11

1.900

2-33/64"

1-25/32 to 2-7/16

44238-02

44128-08

44129-08

21157-11

21158-11

644217-01-00-01

11

2-1/16

2"

1-25/32 to 2-7/16

44238-04

44128-01

44129-01

21157-02

21158-02

644217-01-00-01

11

2-3/8

2-1/8"

1-25/32 to 2-7/16

44238-05

44128-02

44129-02

21157-03

21158-03

644217-01-00-01

11

2-7/8

2"

1-25/32 to 2-7/16

44238-07

44128-03

44129-03

21157-04

21158-04

644217-01-00-01

11

3-1/2

2"

1-25/32 to 2-7/16

44238-08

44128-05

44129-05

21157-06

21158-06

644217-01-00-01

Kit Part Numbers

Bonnet Rebuild Softgoods Kits For popular size U BOPs, a bonnet rebuild softgoods kit is available to provide all parts required to reseal the operating system. Kit parts are shrink-film packed to prevent loss and assure long shelf life. The kits are less expensive than individual parts. All parts in each kit are identified with part numbers and parts list index numbers.

BOP Size 7-1/16"

Pressure Rating/Bonnet Type 3000, 5000, 10,000 and 15,000 psi All

Kit Part Number* 644909-01

11"

3000, 5000 and 10,000 psi Pipe

644909-02

11”

15,000 All

644831-08

13-5/8"

3000, 5000 and 10,000 psi Pipe

644909-03

13-5/8”

15,000 All

644831-12

16-3/4"

5000 psi Pipe

644831-14

16-3/4"

10,000 psi All

644831-15

18-3/4"

10,000 psi All

644909-04

20-3/4"

3000 psi Pipe

644831-17

21-1/4"

2000 psi Pipe

644831-18

21-1/4"

5000 psi All

644831-19

21-1/4"

10,000 psi Pipe

644831-21

26-3/4"

3000 psi All

644831-22

*1 kit contains softgoods for 1 bonnet.

18 26

42

19

24

34 SD-5287

25 32 28

27

33

31

21

20

U BOP Bonnet Softgoods Components

30

29

U BOP Bonnet Rebuild Softgoods Kit Components (Available for 7-1/16" 3000, 5000, 10,000 and 15,000 psi: 11" 3000, 5000 and 10,000 psi; and 13-5/8" 3000, 5000 and 10,000 psi U BOPs.)

Item Number*

Description

Item Number*

Description

18

Ring, Plastic Packing

29

O-Ring, Ram Change Piston to Body

19

Ring, Plastic Energizing

30

O-Ring, Ram Change Piston Rod to Intermediate Flange

20

Seal Ring, Connecting Rod

31

O-Ring, Ram Change Cylinder to Intermediate Flange

21

Ring, Backup

32

O-Ring, Ram Change Piston to Bonnet

24

O-Ring, Operating Cylinder

33

O-Ring, Ram Change Piston

25

O-Ring, Operating Piston Rod to Intermediate Flange

34

O-Ring, Bonnet Bolt Retainer

26

Lip Seal, Operating Piston

39

Packing, Plastic**

27

Seal Ring, Tail Rod

42

Wear Ring, Operating Piston

28

O-Ring, Wiping

*Item numbers are the same as exploded view shown above. **Not shown on illustration.

26

Hydraulic Bonnet Bolt System

Bonnet Bolt and Tensioner Part Numbers BOP Size and Working pressure (psi)

The hydraulic bonnet bolt tensioner eliminates frictional and torsional loads and reduces the time required for making up and breaking out bonnet bolts. • The hydraulic bonnet bolt is completely interchangeable with conventional bonnet bolts. It has a standard hexagonal head. An additional external thread mates with the internal threads in the operating head of the hydraulic bonnet bolt tensioner. The hydraulic bonnet bolt has its operating rod permanently secured in the machined hole in the center of the bolt. • The hydraulic bonnet bolt tensioner consists of a compact tensioner unit with a remote pump.

Bonnet Bolt

Compact Tensioner Unit

11" 15,000 All

49795-13-10

614644-13-10*

13-5/8" 5000 Pipe Ram

49795-13-05

614644-13-05*

13-5/8" 5000 Shear Ram

49917-13-05

614644-13-05*

13-5/8" 10,000 Pipe Ram

49795-13-10

614644-13-10

13-5/8" 10,000 Shear Ram

49917-13-10

614644-13-10*

13-5/8" 15,000 All

49795-13-15

614644-13-15**

16-3/4" 5000 Pipe Ram

49795-16-05

614644-16-05*

16-3/4" 5000 Shear Ram

49917-16-05

614644-16-05

16-3/4" 10,000 All

49795-16-10

614644-16-10**

18-3/4" 10,000 All

49795-18-10

614644-18-10**

21-1/4" 5000 All

49795-21-05

614644-18-10**

*Use 25,000 psi WP pump, part number 645035-01. **Use 30,000 psi WP pump, part number 645035-02.

Bonnet Seals and Connecting Rod Seals For applications where only bonnet and/or connecting rod seals are required, Cameron offers individually packaged components. Connecting rod seals are nitrile rubber. Bonnet seals beginning with 644197 are the newest design.

When high temperature and/or high concentrations of H 2S are expected, Cameron recommends the used of CAMLAST bonnet and connecting rod seals along with CAMRAM 350 packers and top seals.

U BOP CAMLAST Bonnet and Connecting Rod Seals U BOP Bonnet and Connecting Rod Seals BOP Size

Pressure Rating (psi)

Bonnet Seals

Connecting Rod Seals

7-1/16"

3000, 5000, 10,000 and 15,000

644197-01-00-01

212741-37-00-01

11"

3000, 5000 and 10,000

644197-02-00-01

11"

15,000 Model 79

49272-03

13-5/8"

3000, 5000 and 10,000

644197-03-00-01

13-5/8"

15,000

16-3/4"

3000, 5000 and 10,000

18-3/4"

BOP Size

Bonnet Seal Part Numbers

Connecting Rod Seal Part Numbers

7-1/16" 3000 to 15,000 psi

644573-01

212741-37

11" 3000 to 10,000 psi

644573-02

212741-38-00-01

212741-38-00-01

11" 15,000 psi Model 79

644898-01

212741-38-00-01

212741-38-00-01

13-5/8" 3000 to 10,000 psi

644573-03

212741-36-00-01

212741-36-00-01

13-5/8" 15,000 psi

644898-02

212741-36-00-01

49272-02

212741-36-00-01

16-3/4" 3000 and 5000 psi Model B

644573-04

212741-44

46613-04

212741-44

16-3/4" 10,000 psi Model II

644573-04

212741-44

10,000

644197-05-00-01

212741-60

18-3/4" 10,000 psi

644573-05

212741-60

20-3/4"

3000

644197-06

212741-36-00-01

20-3/4" 3000 psi

644573-06

212741-36-00-01

21-1/4"

2000

644197-06

212741-36-00-01

21-1/4" 2000 psi

644573-06

212741-36-00-01

21-1/4"

5000 and 10,000 Model 79

644197-08

11741-58

21-1/4" 5000 psi

644573-08

212741-36-00-01

21-1/4"

7500 and 10,000 Model II

644197-07

11741-58

21-1/4" 7500 and 10,000 psi Model II

644573-07

212741-36-00- 01

26-3/4"

3000

46613-08

212741-36-00-01

21-1/4" 10,000 psi Model 79

644573-08

212741-36-00-01

Bonnet Seal Carriers for U and U II BOPs The bonnet seal carrier is a bore-type sealing assembly which replaces the face seal used as the previous bonnet seal. Sealing capability is not dependent upon bonnet bolt torque. One seal is captured in a machined bore in the BOP body while the other seal is captured in a machined bore in the intermediate flange. The seal carrier was designed, developed and performance-verified for use in newly manufactured BOPs or as a r eplacement seal assembly for BOPs where either the BOP body or the intermediate flange requires weld repair on the sealing surfaces. SD-10860

The bonnet seal carrier can be retrofitted to any U or U II BOP. Part Numbers for Bonnet Seal Carriers for U and U II BOPs BOP Type

BOP Size

Seal Carrier Qty.

Retainer Ring

Part No.

Qty.

Part No.

Bonnet Seals Qty.

Part No.

U

11” 3000, 5000 and 10,000 psi

2

645464-02-00-01

2

702640-27-61

4

U

13-5/8” 10,000 psi

2

645507-01-00-01

2

702645-27-91

4

645509-01-00-01

U

13-5/8” 15,000 psi

2

2010145-01

2

702645-27-71

4

2010146-01

U

18-3/4” 10,000 psi

2

2010185-01

2

702645-28-31

4

2010184-01

UII

18-3/4” 10,000 psi

2

645464-01

2

645485-01-00-01

4

645484-01-00-01

27

645484-02-00-01

U II BOP The Cameron U II BOP takes all of the features of the U BOP and adapts them for subsea use in the 18-3/4” 10,000 and 15,000 psi WP sizes. Like all other Cameron preventers, the rams in the U II BOP are pressureenergized. Wellbore pressure acts on the rams to increase the sealing force and maintain the seal in case of hydraulic pressure loss. Seal integrity is actually improved by increased well bore pressure. Other feature s of the U II BOP include: • Internally ported hydraulic stud tensioning system ensures that stud loading is consistently accurate and even. • Bonnet seal carrier is available to eliminate the need for high makeup torque on bonnet studs and nuts. • Hydraulically operated locking mechanisms, wedgelocks, lock the r am hydraulically and hold the rams mechanically closed even when actuating

pressure is released. The operating system can be interlocked using sequence caps to ensure that the wedgelock is retracted before pressure is applied to open the BOP. • A pressure balance chamber is used with the wedgelocks to eliminate the possibility of the wedgelock becoming unlocked due to hydrostatic pressure. Other features include hydraulically opening bonnets, forged body and a wide selection of rams to meet all applications. See pages 31 and 32 for rams available to fit the U II BOP.

SD-10829

18-3/4" Double U II Blowout Preventer

28

U II BOP Hydraulic Control System

Ram Open, Bonnet Closed

Ram Closed, Bonnet Open

SD-8630

U II BOP Operating Data and Fluid Requirements Bore Size and Working Pressure 18-3/4" 10,000 psi

Gallons to Open Pipe Rams (1 Set) 22.3

Gallons to Close Pipe Rams (1 Set) 24.7

Gallons to Open Bonnets (1 Set) 33.7

Gallons to Close Bonnets (1 Set) 25.2

Closing Ratio 6.8:1

Opening Ratio 2.5:1

Gallons to Unlock Gallons to Lock Wedgelock Wedgelock 5.5 0.66

18-3/4" 15,000 psi

32.3

34.7

43.9

35.2

9.3:1

3.5:1

5.5

0.66

18-3/4" 15,000 psi with Cylinder

25.8

28.3

37.4

28.7

7.6:1

2.9:1

5.5

0.66

U II BOP Dimensions The following designations refer to the dimensional drawing: 

A-1 A-2 B-1 B-2 B-3 C D E-1 E-2 F-1 F-2 G H-1 H-2 J



Length -- bonnets closed, with wedgelocks Length -- bonnets opened, with wedgelocks Height -- flanged Height -- Clamp hubs Height -- studded x flanged Width -- no side outlets Centerline of preventer to outlet flange or hub face. This distance is variable and must be determined per individual specifications. Centerline of side outlet (outlet below rams in double) to bottom flange face Centerline of side outlet (outlet below rams in double) to bottom hub face Top of upper ram to top flange face Top of upper ram to top hub face Height of ram Centerline of side outlet between rams to bottom flange face Centerline of side outlet between rams to bottom hub face Top of lower ram to bottom of upper ram

D        

C         SD-5139

U II BOP Top View      



A 



F

       

G 



J

B

       

G

H





E

       





SD-5139

U II BOP Side View

U II Blowout Preventer Dimensions and Weights BOP Size, Working Pressure and Body Style

A-1 (In.)

A-2 (In.) 185.500

B-1 (In.) __

18-3/4" 10,000 Single

147.000

18-3/4" 10,000 Double

147.000

185.500

87.125

B-2 (In.)

C (In.)

E-1 (In.)

E-2 (In.)

F-1 (In.)

F-2 (In.)

43.125

B-3 (In.) __

42.50

20.500

13.938

22.250

15.688

11.5

74.000

__

42.50

20.500

13.938

22.250

15.688

11.5

47.25

23.875

18.062

26.625

20.812

47.25

23.875

18.062

26.625

20.812

18-3/4" 15,000 Single

148.375

186.875

64.750

53.125

__

18-3/4" 15,000 Double

148.375

186.875

98.875

87.250

84.5

29

G (In.)

H-1 (In.) __

H-2 (In.) __

J (In.) __

Weight (Lbs)

45.062 __

19.625 __

56,950

11.5

51.625 __

11.5

58.000

52.188

22.625

69,800

29,950 36,700

U II BOP Part Numbers 47 46

6

29

42

41

11

42

41

43

43

38 4

30

31 44

5

45

33

48

34

7

36

35

37

49

3a 3b

32

40

19

54

42 10

9

24

26

27

25

8

28

51

41

39

SD-7866

22 23 2 52

14

13

12

15

16

17

18 19

1

21

20

U II Exploded View

53

U II Blowout Preventer Part Numbers Item No.

Description Description

Qty Qty Sgl Dbl

1

Body, Clamped

1

1

2

Intermediate Flange

2

3a

Bonnet

2

3b

Bonnet

2

4

4

Piston, Operating

2

4

4

Piston, Operating (Super Trim)

2

5

Piston, Ram Change Open

6

18-3/34" 10,000 psi

18-3/4" 15,000 psi

Item No.

Description Description

Qty Qty Sgl Dbl

18-3/34" 10,000 psi

18-3/4" 15,000 psi

644102-02

615239-03

29

Stud, Wedgelock

12 24

4

615303-01

Nut, Wedgelock

12 24

12955-16

12955-16

615302-01 __

614722-03 __

30

4

31

Retainer Ring, Tail Rod

2

4

33186-47

33186-47

44854-12

44854-12

614621-01

32

Seal Ring, Tail Rod

2

4

707232

707232

614623-01

33

Wear Ring, Ram Change Piston Head

4

8

614742-03

614742-03

2

615304-01 __

614623-05†

34

O-Ring, Ram Change to Piston Body

4

8

702640-34-31

702640-34-31

2

4

614618-02

614618-02

35

O-Ring, Ram Change Cyl to Bonnet

4

8

702640-44-21

702640-44-21

Piston, Ram Change Close

2

4

614618-01

614618-01

36

O-Ring, Ram Change Cyl to Int. Flg

4

8

702640-44-01

702640-44-01

7

Cylinder, Ram Change

4

8

30273-16

30273-16

37

Bearing Gland, Intermediate Flange

8 16

615727-01

615727-01

8

Stud, Bonnet

8 16

644031-18-10

644612-18-15

38

Seal Rng, Ram Change Pst Rod to Int Flg

4

707233

707233

8

9

Piston, Bonnet Stud

8 16

615453-18-10

615453-18-15

39

Connector, Tubing

2

4

707159

707159

10

Seal, Bonnet Stud

8 16

615452-18-10

615452-18-15

40

Retainer Ring, Lip Seal Tailrod

2

4

614672-04

614672-04

11

Nut, Bonnet Stud

8 16

644018-18-10

615451-18-15

41

Gland, Bleeder

6 12

17454-08

17454-08

12

Pin, Ram Guide

4

8

30313-11

30313-11

42

Plug, Bleeder

6 12

17454-09

17454-09

13

Lantern Ring

4

8

615332-02-00-00 615332-02-00-00

43

Lifting Eye

2

14

Ring Retainer, Backup Ring

2

4

614672-05

614672-05

44

Seal Ring, Ram Change Piston Head

4

8

707231

707231

15

Ring, Backup

2

4

610108-15

610108-15

45

Wear Ring, Operating Piston

2

4

49223-18

16

Seal Ring, Connecting Rod

2

4

710671

710671

45

Wear Ring, Operating Piston

2

4

49223-16 __

17

Retainer Plate

2

4

615210-01

615210-01

46

Lip Seal, Operating Piston

2

4

710546

18

Retainer Ring

2

4

41008-08-00-52

41008-08-00-52

46

Lip Seal, Operating Piston

2

4

710545 __

19

Bonnet, Seal

2

4

644169-01-00-01 644169-01-00-01

47

O-Ring

* **

20

Connector, Tubing

2

4

707276

707276

48

Cylinder, Operating

2

21

Quick Disconnect, Male

2

4

708490-01

708490-01

48

Cylinder, Operating

2

-

22

Protective Cover

2

4

615627-01

615627-01

49

Bearing Retainer Ring, Seal

4

8

23

Cap Screw

6 12

702500-16-00-10 702500-16-00-10

50

Plastic Packing

24

Screw, Plastic Packing

2

4

5940-09

5940-09

51

Ring, Seal Operating Piston

2

4

25

Pipe Plug, Plastic Packing

2

4

005930-05-10

005930-05-10

52

Ring, Backup

2

26

Check Valve, Plastic Packing

2

4

M517988

M517988

53

Check Valve, Weep Hole

-

27

Cap Screw, Int Flg to Bonnet

702585-36-00-93 702585-36-00-93

54

Wedgelock w/Pressure Bal Chamber (RH) 2

4

615402-01

615402-01

28

Ring, Seal Sec Conn Rod

710670

54

Wedgelock w/Pressure Bal Chamber (LH) 2

4

615402-02

55

O-Ring (Not Shown)

4

615402-02 __

32 64 4

8

710670

*4 required for 18-3/4" 10,000 psi BOP; 2 required for 18-3/4" 15,000 psi BOP. **8 required for 18-3/4" 10,000 psi BOP; 4 required for 18-3/4" 15,000 psi BOP. †Alternate parts for 18-3/4 15,000 psi assembly with operating cylinder.

30

2 11849

-

49223-19† 710851†

30101-63-13-85 702640-47-11 __ 30274-15 __

644613-01†

614348-10

614348-10

7650-08

7650-08

710640

710640

4

610108-28

610108-28

-

709493

709493

10 20

2

11849

702640-46-91†

U II BOP Pipe Rams U II BOP Pipe Ram Part Numbers

Pipe rams are available for use in Cameron U II BOPs to fit all commonly used sizes of tubing, drill pipe, drill collar or casing within the ranges in the chart on this page. Cameron pipe rams include the following features: • Cameron pipe rams are self-feeding and incorporate a large reservoir of packer rubber to ensure a long-lasting seal under all conditions. • Ram packers lock into place and are not dislodged by well flow. • Cameron U II pipe rams are suitable for H 2S service per NACE MR-01-75. • CAMRAM™ top seals are standard for all U II BOP pipe rams. • CAMRAM 350™ packers and top seals are available for high temperature service and for service in which concentrations of H 2S are expected.

Top Seal

18-3/4" 10,000 and 15,000 psi U II Top Seal: 645282-01-00-01

Pipe PipeSize Size

Packer

SD-5307

Blind

Assembly 644248-01

Ram 615407-01

Packer 644247-01*

2.375"

644248-02

614770-01

644247-02*

2.875"

644248-03

614770-02

644247-03*

3.500"

644248-04

644742-01

644247-04*

3.500" Aluminum

644248-05

614770-04

644247-05

4.000"

644248-06

614770-05

644247-06

4.500"

644248-07

644742-02

644247-07

4.500" Aluminum

644248-08

614770-07

644247-08

4.750"

644248-09

614770-08

644247-09

5.000"

644248-10

644742-03

644247-10-00-01

5.500"

644248-11

614770-10

644247-11*

6.000"

644248-12

614770-12

644247-12

6.625"

644248-13

644742-04

644247-13

7.000"

644248-14

614770-14

644247-14

7.625"

644248-15

614770-15

644247-15

8.625"

644248-16

614770-16

644247-16

9.000"

644248-17

614770-17

644247-17

9.625"

644248-18

614770-18

644247-18-00-01

Ram Body

U II BOP Pipe Ram

CAMRAM Top Seal

U II BOP Variable Bore Rams

CAMRAM VBR Packer

One set of Cameron variable bore rams seals on several sizes of pipe or hexagonal kelly. Variable bore rams are available in the size ranges listed in the chart below. All rams listed are suitable for H 2S service per NACE MR-01-75. CAMRAM packers and top seals are standard for all U II BOP variable bore rams. The variable bore ram packer contains steel reinforcing inserts similar to those in the Cameron annular BOP packer. The inserts rotate inward when the rams are closed so the steel provides support for the rubber which seals against the pipe.

SD-5129

Ram Body

U II BOP Variable Bore Ram

U II BOP Variable Bore Ram Part Numbers BOP Size and Working Pressure

Pipe Size Range

Ram Assembly

Ram Body

Packer Packer

18-3/4" 10,000 psi 18-3/4" 10,000 psi 18-3/4" 15,000 psi 18-3/4" 15,000 psi

7.625" to 3.500" 5.000" to 2.875" 7.625" to 5.000" 5.000" to 3.500"

614879-01 614878-01 614879-01 614878-01

614846-01 644748-01 614846-01 644748-01

644918-01 644919-01 644918-01 644919-01

Top Seal

645282-01-00-01 644246-02 645282-01-00-01 644246-02

Bonnet Seals and Connecting Rod Seals Bonnet Seal and Connecting Rod Seal Part Numbers

For applications where only bonnet and/or connecting rod seals are required, Cameron offers individually packaged components.

Temperature Range

Bonnet Seal

Normal (Up to 250°F)

644169-01-00-01

710671

644169-03

711871

High (Up to 350°F)

31

Connecting Rod Seal

U II BOP Shearing Blind Rams Cameron shearing blind rams shear the pipe in the hole, then bend the lower section of sheared pipe to allow the rams to close and seal. Shearing blind rams can be used as blind rams during normal drilling operations. Features include of shearing blind rams include: • Large frontal area on the blade face seal reduces pressure on the rubber and increases service life. • Cameron SBRs can cut pipe numerous times without damage to the cutting edge. • The single-piece body incorporates an integrated cutting edge. • CAMRAM™ top seals are standard for all U II BOP shearing blind rams. • H2S SBRs are available for critical service applications and include a blade material of hardened high alloy suitable for H 2S service. • The Cameron shearing blind ram has a single-piece body with an integrated cutting edge.

6

1 2 7

4

SD-10827

U II BOP Shearing Blind Ram

U II BOP Shearing Blind Ram Assemblies Item Item

Description Description

18-3/4" 10,000 and 15,000 psi

1

Upper Ram Assembly

2010214-01

2

Ram

2010216-01

3

Blade Packer

4

Packer

5

Packer

615568-01

Top Seal

645282-01-00-01

**6 7

3

5

10

12

4

7

8

6

2

46910-05 615567-01

Lower Ram Assembly

2010215-01

*8

Ram

2010217-01

*9

Packer

615567-01

*10

Packer

615568-01

SD-10815

3 5

1

11

*Part of lower ram subassembly, item 7. **Part of upper and lower ram subassemblies, items 1 and 7.

9

U II BOP H 2S Shearing Ram Assemblies

U II BOP H2S Shearing Blind Ram

Item Item

Description Description

1

Upper Ram Subassembly

644759-01

2

Ram

644752-01

7

Blade Insert

644519-03

8

Cap Screw

644524-01

9

Lower Ram Subassembly

644759-02

3

Blade Packer, High Temperature

Ram

644752-02

4

Left Side Packer, High Temperature

644905-01

Right Side Packer, High Temperature

644905-02

Top Seal, High Temperature

645246-01

10

18-3/4" 10,000 and 15,000 psi

CAMRAM 350 Shearing Blind Ram Blade and Side Packers Item Item

11

Blade Insert

644519-02

5

12

Pin

200231-00

6

Description Description

18-3/4" 10,000 and 15,000 psi 644904-01

Note: All packers and top seals (Items 3, 4, 5, 6) are the same as the shearing blind ram shown above.

CAMRAM 350 Packers and Top Seals for U II BOPs CAMRAM 350 U II BOP pipe ram packers and top seals are available for applications which require higher temperature capabilities than standard CAMRAM packers and top seals. CAMRAM 350 is available in all U II BOP sizes in which standard CAMRAM packers and tops seals are available. At present, only pipe sizes (up to 6-5/8") are available.

CAMRAM 350 Top Seal

U II BOP CAMRAM 350 Part Numbers Pipe PipeSize Size

18-3/4" 10,000 and 15,000 psi Top Seal 645282-01 Description

Part No.

Blind

Packer

644714-01

2.375"

Packer

644714-02

2.875"

Packer

644714-03

3.500"

Packer

644714-04

5.000"

Packer

644714-10

5.500"

Packer

644714-11

SD-7786

CAMRAM 350 Packer

U II CAMRAM 350 Packer and Top Seal

32

T BOP The Cameron T blowout preventer offers a unique combination of benefits, including safety, economy, reliability, extended service life, reduced height and fast and easy service. Side ram removal on the T BOP permits reduced stack height and facilitates change-out of rams and packers. Sliding the rams to the side simplifies access and handling and reduces vertical clearance requirements. The T BOP is available in a modular design which greatly reduces stack height. This design is possible because the side ram removal feature of the T BOP allows for construction of a BOP stack with virtually no extra space between BOP body cavities. Each BOP body or module has only a slightly raised face and a gasket prep. The design of the T is based on Cameron’s experience with the highly successful U and U II ram-type BOPs and combines much of this proven technology including: • Metal-to-metal bonnet gaskets increase the safety and reliability in critical service applications.

• Hydraulic stud tensioning ensures that stud loading is consistently accurate and even. • Hydraulically operated locking mechanisms, ST locks, act directly on the operating piston tailrod and are interlocked by sequence caps to ensure that locks are opened before the BOP is opened. • Bonnet studs instead of bonnet bolts reduce the need to make and break threads in the BOP body. • Most operating system seals can be replaced with the bonnet in the ramchange position without removing the bonnets. • The standard T BOP has a large enough piston area to shear all commonly used sizes and grades of drill pipe. Other features include hydraulically opening bonnets, forged body and a wide selection of rams to meet all applications. See pages 40 and 41 for rams available to fit the T BOP.

SD-9599

18-3/4" T Blowout Preventer

33

T BOP Hydraulic Control System The T blowout preventer is designed so that hydraulic pressure opens and closes the rams and provides a means for side ram removal. Ram opening pressure, shown in blue on the illustration, opens the rams and closes the bonnets after ram change-out. The rams are pulled outward, close to the bonnets before the bonnets begin moving toward the preventer body. This assures that the rams never obstruct the bore or interfere with pipe in the hole. Hydraulic pressure draws the bonnets tightly against the preventer body and the bonnet studs are hydraulically tensioned to hold the bonnets closed. Ram opening pressure is also used to automatically unlock the ST locks.

Ram closing pressure, shown in the red on the illustration, closes the rams. When the bonnet nuts are released, closing pressure opens the bonnet. When the bonnet has moved to the fully extended position, a ram removal tray is inserted and ram opening pressure brings the rams into the clear for removal. ST locks are locked by applying pressure, shown in green on the illustration, to the ST-lock lock port. This pressure wedges a piston-like assembly into position to ensure that the rams are locked in the closed position. An option is available where the locks are also locked automatically by installing a sequence valve in the system.

T BOP Operating Data and Fluid Requirements Bore Size and Working Pressure

Gallons to Open Pipe Rams (1 Set)

Gallons to Close Pipe Rams (1 Set)

Gallons to Open Bonnets (1 Set)

Gallons to Close Bonnets (1 Set)

Closing Ratio

Opening Ratio 4.3:1

Gallons to Unlock ST Locks (1 Set) __

Gallons to Lock ST Locks (1 Set) __

13-5/8" 10,000 psi

12.9

13.9

15.43

13.75

8.6:1

18-3/4" 15,000 psi

22.4

24.3

27.63

24.64

6.7:1

3.1:1

3.42

3.41

T BOP Hydraulic Operating System

SD-10806

SD-10806

Ram Open _ Bonnet Closed, ST Lock Unlock Ram Closed _ Bonnet Open ST Lock Lock

T and U II BOP Accessories T and U II BOP Accessory Part Numbers A high-pressure, hydraulic pump system is utilized with all Cameron T and U II BOPs for tensioning of the bonnet studs.

Part Number

34

Description

645035-02

High-Pressure, Hydraulic Pump Unit to Operate Hydraulic Bonnet Studs

615309-01

10-Foot High-Pressure Hose Assembly for Hydraulic Pump Unit

615309-02

25-Foot High-Pressure Hose Assembly for Hydraulic Pump Unit

708490-01

Male Half of Quick-Disconnect Coupling (One Required per Ram Cavity)

T BOP Dimensions Both the 13-5/8" 10,000 psi WP and the 18-3/4" 15,000 psi WP T BOPs are available in single, double and modular configurations. In addition, end preparations can be API flange, clamp hub or studded connections. The following designations refer to the T BOP dimensional drawings on this page: A-1 Length -- bonnets closed, with ST locks A-2 Length -- bonnets opened, with ST locks A-3 Length -- bonnets closed, locking screws locked A-4 Length -- bonnets opened, locking screws unlocked B-1 Height -- flanged B-2 Height -- clamp hubs B-3 Height -- studded x flanged B-4 Height -- modular C Width -- no side outlets A-3 (Bonnets Closed)      

D E-1 E-2 E-3 E-4 F-1 F-2 F-3 F-4 G H J

A-1 (Bonnets Closed)



     

A-4 (Bonnets Opened)





Centerline of preventer to outlet flange or hub face. This distance is variable and must be determined per individual specifications Top of preventer to centerline of outlet -- flanged Top of preventer to centerline of outlet -- Cameron clamp hubs Top of preventer to centerline of outlet -- studded x flanged Top of preventer to centerline of outlet -- modular Top of upper ram to top flange face Top of upper ram to top hub face Top of upper ram to studded face Top of upper ram to modular face Height of ram Centerline of upper outlet to centerline of lower outlet Centerline of upper ST lock (or locking screw) to centerline of lower ST lock (or locking screw)





A-2 (Bonnets Opened)







F

F E

E



G

G  





 



J

B





J

B

H

H 

 



SD-8635

SD-8491





Side View - 18-3/4" T BOP

Side View - 13-5/8" T BOP      



C      

D

     





C      



D

SD-8635

SD-8492

End View - 18-3/4" T BOP

End View - 13-5/8" T BOP

13-5/8" 10,000 psi WP T BOP Dimensions Style Single

A-3 124"

A-4 175.6"

B-1 4 3.6"

B-2 34.4"

B-3 33.5"

B-4 23.3"

C 32"

E-1 26.7"

E-2 22.1"

E-3 16.6"

E-4 16.6"

F-1 18"

F-2 13.4"

F-3 7.9"

F-4 7.9"

G 7.5"

H 24.6"*

J 24.6"

Weight 15,500 lb

Double

124"

175.6" 68.2"* 59.0"*

58.1"*

–

32"

26.7"

22.1"

16.6"

–

18"

13.4"

7.9"

–

7.5"

24.6"*

24.6"

27,650 lb

Add 12.9" for 30" spacing between rams.

18-3/4" 15,000 psi WP T BOP Dimensions Style Single

A-1 177"

A-2 217"

B-1 64.2"

B-2 53"

B-3 49"

B-4 32.1"

C 47"

E-1 40.6"

E-2 35.1"

E-3 25.6"

E-4 24.6"

F-1 26.4"

F-2 20.8"

F-3 11.3"

F-4 10.3"

G 11.5"

H 34"*

J 34"

Weight 44,000 lb

Double

177"

217"

9 8.3"*

87"*

83.1"*

–

47"

40.6"

35.1"

25.6"

–

26.4"

20.8"

11.3"

10.3"

11.5"

34"*

34"

85,000lb

Add 7.6" for 30" spacing between rams.

35

13-5/8” 10,000 psi WP T BOP Part Numbers 9

3

6

1

7 5 8

13 10

4

SD-10809

11

16

13-5/8" 10,000 psi WP T BOP 12

13-5/8" 10,000 psi WP T BOP Component List and Part Numbers Item Item

Description Description

Qty

Item Item

Part No.

Description Description

Qty

Part No.

1

Body (Type)

1

644765-01

9

Bonnet Subassembly, RH

1

644797-01

2*

Plug

4

201026

10

Bonnet Subassembly, LH

1

644797-02

3

TX Bonnet Gasket

2

644799-01

11

Nut Subassembly

8

644616-02

4

Screw, 12 Pt Cap

24

702585-14-00-10

12

Collar Subassembly

8

644789-01

5

Bonnet Stud

8

644652-01

13

O-Ring

4

702640-32-31

6

Bearing Retainer

4

644653-01

14*

Pipe Plug

4

201024

7

Split Bearing

8

644654-01

8

Wear Ring

8

614742-10

15* 16

Pipe Plug Ram Guide Pin

4 4

675029-49 644658-01

*Not shown.

36

13-5/8" 10,000 psi WP T BOP Bonnet Subassembly Part Numbers

46

44

45

42

43

79 78

86

47

66

48

40

41

39

37

38

36

49

60

53

50

57

59

61 56

51 74

73

72

67

62

63

64

51

54

55

84 SD-10808

69

68

52

58

85

30

65

77

76

75

71

70

32 31

33

35

13-5/8" 10,000 psi WP T BOP Bonnet Subassembly Exploded View

34

13-5/8" 10,000 psi WP T BOP Bonnet Subassembly Parts List Item

Description

Qty.

Part No.

Item

Description

Qty.

Part No.

30

Bonnet

1

644630-01

59

Retaining Ring, Spirolox

1

18572-18

31

Liner, Operating Cylinder

1

644631-01

60

O-Ring, Size 360

1

702640-36-01

32

O-Ring

1

644768-02

61

Screw, 12 Pt Cap

2

702585-06-00-30

33

Operating Piston Subassembly

1

644791-01

62

Backup Ring

1

644771-01

34

Seal Ring

1

710410

63

Seal Ring

1

710369

35

Wear Ring

1

614742-08

64

Retainer Ring

1

644737-01

36

Ram Change Piston, Open

1

644637-01

65

Retaining Ring, Spirolox

1

708393

37

Ram Change Piston, Close

1

644637-02

66

Locking Screw Housing

1

644734-01

38

Seal Ring

2

710505

67

Locking Screw

1

644733-01

39

Wear Ring

2

614742-09

68

O-Ring, Size 459

1

702645-45-91

40

Cylinder, Ram Change System

2

644640-01

69

Stud, Double Ended

4

644450-03

41

O-Ring, Size 336

2

702640-33-61

70

Nut

4

644792-01

42

Gland, Ram Change System

2

644641-01

71

Button

1

644635-01

43

Backup Ring

2

644381-06

72

Inner Seal, Hydraulic Bonnet Stud Piston

4

644651-01

44

Seal Ring

2

710504

73

Inner Seal, Hydraulic Bonnet Nut

4

644438-02

45

O-Ring, Size 341

2

702640-34-11

74

Outer Seal, Hydraulic Bonnet Nut

4

644439-02

46

Seal Retainer, Ram Change System

2

644642-01

75

Spacer Ring, Hydraulic Bonnet Stud

4

644650-01

47

Cylinder Head, Ram Change System

2

644643-01

76

O-Ring, Size 362

4

702640-36-22

48

O-Ring, Size 338

2

702640-33-81

77

Retaining Ring, Spirolox

4

33186-05

49

Insert, Bonnet Gasket

1

644644-01

78

Gland

2

17454-46

50

Screw, 12 Pt Cap

12

702585-14-00-26

79

Blind Plug

2

17454-36

51

Backup Ring

2

644381-05

80* Check Valve

1

709493

52

Seal Ring

1

710430

81* Bleeder Plug Assembly

1

640202-02

53

Seal Carrier

1

644726-01

82* High Pressure Plug

4

615684-02

54

O-Ring, Size 352

1

702640-35-21

83* O-Ring, Size 113

4

702640-11-31

55

Seal Ring

1

609745-14

84

Tubing Connector

1

707276

56

Backup Ring

1

644381-04

85

Male Quick-Disconnect

1

708490-01

57

Seal Ring

1

710429

58

Retainer Ring

1

644648-01

*Not shown 

37

18-3/4” 15,000 psi WP T BOP Part Numbers

9

7

8

4

2

3

5 8

13 10 17

12

11

16 SD-8060

1

18-3/4" 15,000 psi WP T BOP

18-3/4" 15,000 psi WP T BOP Component List and Part Numbers Item Item 1 2

Description Description Body (Typical) Plug

Qty

Part No.

1

644622-01

8

3

TX Bonnet Gasket Kit

4

Screw, 12 Pt Cap

48

4

5

Bonnet Stud

6

Bearing Retainer

7 8

Item Item

Description Description

Qty

Part No.

9

Bonnet Subassembly, RH

2

644562-01-02-01

201026

10

Bonnet Subassembly, LH

2

644562-02-02-02

644770-01

11

Nut Subassembly

16

644616-01

702585-14-00-10

12

Collar

16

615707-01

16

644362-01

13

O-Ring

8

644361-01

Split Bearing

16

644360-01

16 17

Ram Guide Pin Retaining Ring, Spirolox

Wear Ring

16

614742-04

38

8 8 16

702640-32-61 644399-01 711202

T BOP Pipe Rams Pipe rams are available for use in Cameron T BOPs to fit all commonly used sizes of tubing, drill pipe, drill collar or casing within the ranges in the chart on this page. Cameron pipe rams include the following features: • Cameron pipe rams are self-feeding and incorporate a large reservoir of packer rubber to ensure a long-lasting seal under all conditions. • Ram packers lock into place and are not dislodged by well flow. • All Cameron T pipe rams are suitable for H 2S service per NACE MR-01-75. • CAMRAM™ top seals are standard for all T BOP pipe rams. • CAMRAM 350™ packers and top seals are available for high temperature service and for service in which concentrations of H 2S are expected.

CAMRAM Top Seal

CAMRAM Packer Ram Body

SD-10824

Wear Pad Screw

T BOP Pipe Ram

T BOP Pipe Ram Part Numbers Pipe Size

18-3/4" 15,000 psi*** Top Seal 644369-01-00-01

13-5/8" 10,000 psi**** Top Seal 644409-01

Ram 644479 __

Packer 644427 __

Assembly 644458

Ram 644401

Packer 644486

Blind

Assembly 644457 __

()-01

()-01

()-01**

1.315"

__

__

__

()-02

()-02

()-02

1.660"

__

__

__

()-03

()-03

()-03

1.900"

__

__

__

()-04

()-04

()-04

2.062"

__

__

__

()-05

()-05

()-05

2.375"

()-01

()-01

()-02

()-06

()-06

()-06**

2.875"

()-02

()-02

()-03

()-07

()-07

()-07**

3.500"

()-03

()-03

()-04**

()-08

()-08

()-08**

4.000"

()-04

()-04

()-05

()-10

()-10

()-10

4.500"

()-05

()-05

()-06

()-12

()-12

()-12**

4.750"

()-06

()-06

()-07

()-14

()-14

()-14

5.000"

()-07

()-07

644427-08-00-01

()-15

()-15

()-15**

5.500"

()-08

()-08

()-09

5.562'

()-09

()-09

()-10

()-17 __

()-17 __

()-17** __

6.000"

()-10

()-10

()-11

()-18

()-18

()-18

6.625"

()-11

()-11

()-12

()-19

()-19

()-19

7.000"

()-12

()-12

()-13

()-20

()-20

()-20**

7.625"

()-13

()-13

()-14

()-21

()-21

()-21**

8.625"

()-14

()-14

()-15

()-22

()-22

()-22

9.000"

()-15

()-15

()-16

()-23

()-23

()-23

9.625"

()-16

()-16

()-17

10.750"

()-17

()-17

()-18

()-24 __

()-24 __

()-24** __

11.750"

()-18

()-18

()-19

__

__

__

13.375"

()-19

()-19

()-20**

__

__

__

3.500" Aluminum

()-20

()-20

()-21

()-09

()-09

()-09

4.000" Aluminum

()-21

()-21

()-22

()-11

()-11

()-11

4.500" Aluminum

()-22

()-22

()-23

()-13

()-13

()-13

5.000" Aluminum

()-23

()-23

()-24

()-16

()-16

()-16

Base numbers remain the same. Dash numbers change by pipe size. **Currently available. ***Additional part numbers include: right side wear pad, 644509-01; left side wear pad, 644510-01; and, screws, 644349-01. ****Additional part numbers include: right side wear pad, 644590-01; left side wear pad, 644590-02; and, screws, 644349-01.

T BOP CAMRAM 350 Packers and Top Seal Part Numbers Description

18-3/4" 15,000 psi

Top Seal

645068-01

3-1/2" Packer

645070-04

5" Packer

645070-08

40

T BOP Shearing Blind Rams Cameron shearing blind rams shear the pipe in the hole, then bend the lower section of sheared pipe to allow the rams to close and seal. Shearing blind rams can be used as blind rams during normal drilling operations. Features include of shearing blind rams include: • Large frontal area on the blade face seal reduces pressure on the rubber and increases service life. • Cameron SBRs can cut pipe numerous times without damage to the cutting edge. • The single-piece body incorporates an integrated cutting edge. • CAMRAM™ top seals are standard for all T BOP shearing blind rams. • H 2S SBRs are available for critical service applications and include a blade material of hardened high alloy suitable for H 2S service. • The Cameron SBR has a single-piece body with an integrated cutting edge.

4

5

9

10

3

1

11

7 2 6

9 8

CAMRAM 350 Shearing Blind Ram for T BOP Part Numbers Item 2

Description Right Packer

 U p p e r S B R

18-3/4" 15,000 psi WP 644893-01

3

Left Packer

644893-02

4

Top Seal*

645068-01

5

Blade Packer

644894-01

SD-10830

 Lo w e r S B R

T BOP Shearing Blind Ram

*The part numbers listed above are used for both standard  and high temperature applications except for the top seal.

T BOP Shearing Blind Ram Part Numbers 18-3/4" T BOP Item

Description

13-5/8" T BOP

Upper SBR 644514-01

Lower SBR 644514-02

Upper SBR 644591-01

Lower SBR 644591-02

1

Body

644515-01

644515-02

644402-01

644402-02

2 3

Right Packer Left Packer

644893-01 644893-02

644893-01 644893-02

644490-01 644490-02

644490-01 644490-02

4 5

Top Seal Blade Packer

644369-01-00-01 644894-01

644369-01-00-01 __

644409-01 644541-01

644409-01 __

6 7 8 9 10 11

Right Wear Pad Left Wear Pad Screw Blade Insert Screw Pin

644509-01 644510-01 644349-01 644519-03 644524-01 __

644509-01 644510-01 644349-01 644519-02 __

644590-01 644590-02 644349-01 644581-01 644582-01 __

644590-01 644590-02 644349-01 644581-02 __

200231

T BOP Variable Bore Rams

200231

CAMRAM Top Seal

One set of Cameron variable bore rams seals on several sizes of pipe or hexagonal kelly. Variable bore rams are available in the size ranges listed in the chart below. All rams listed are suitable for H 2S service per NACE MR-01-75. CAMRAM packers and top seals are standard for all T BOP variable bore rams. The variable bore ram packer contains steel reinforcing inserts similar to those in the Cameron annular BOP packer. The inserts rotate inward when the rams are closed so the steel provides support for the rubber which seals against the pipe.

CAMRAM Packer Ram Body

SD-10831

Left Wear Pad Right Wear Pad

Screw

T BOP Variable Bore Ram

T BOP Variable Bore Ram Part Numbers BOP Size and Working Pressure

Pipe Size Range

Assembly

Body

Right

Left Wear Pad

Screw Wear Pad

13-5/8" 10,000 psi

2.875" to 5.000"

644618-01

644567-01

644549-01

644409-01

644590-01

644590-02

644349-01

18-3/4" 15,000 psi

3.500" to 5.000"

644533-02

644576-01

644531-01-01

18-3/4" 15,000 psi

3.500" to 7.625"

644533-01

644575-01

644369-01-00-01

644509-01

644510-01

644349-01

644404-01-00-01 644369-01-00-01

644509-01

644510-01

644349-01

Packer

41

Top Seal

TL BOP The Cameron TL blowout preventer is designed to meet the demand for a lightweight BOP for offshore and subsea applications. By eliminating separate bonnets and intermediate flanges, the weight of the TL has been reduced by as much as 30% compared to similar models. This is particularly advantageous on offshore platforms where weight is critical. By converting to a TL system, an operator can drill the entire well with one BOP stack replacing the old two-stack system. The design of the TL is based on experience with the U II and T BOPs and combines much of this field-proven technology including: • Side ram removal and wear pads on the bottoms of the rams. • Bonnet seal carrier which eliminates the need for high makeup torque on bonnet studs and nuts. • Bonnet studs instead of bonnet bolts to reduce the need to make and break threads in the BOP body. • Most operating system seals can be replaced with the bonnet in the ramchange position without removing the bonnets. • 18-3/4” 5000 and 10,000 TL BOPs are fitted with hydraulically operating locking mechanisms, wedgelocks, which lock the ram hydraulically and hold the rams mechanically closed even when actuating pressure is released. The operating system can be interlocked using sequence caps to ensure that the wedgelock is retracted before pressure is applied to open the BOP.

• 18-3/4” 15,000 TL BOPs utilize ST locks which are hydraulically operated and act directly on the operating piston tailrod and are interlocked by sequence caps to ensure that locks are opened before the BOP is opened. Other features include hydraulically opening bonnets, forged body and a wide selection of rams to meet all applications.

TL BOP Rams Rams available for the 5000 and 10,000 psi TL BOP include standard pipe rams as well as Cameron Flexpackers in 5” to 7” and 2-7/8” to 5” pipe sizes. Also, a DVS shear ram was developed for the TL BOP. The DVS shear ram is similar to a Cameron shearing blind ram and has two “V” blades for more effective shearing. During testing, these rams sheared 6-5/8”, 27.6 lb per foot, S-135 pipe with 2200 psi closing pressure. The 15,000 psi TL BOP uses the same field proven r ams as the 18-3/4” 15,000 psi T BOP.

18-3/4” 5000 psi WP TL Blowout Preventer

TL BOP Specifications BOP Size and Working Pressure 18-5/8" 10,000 psi 18-5/8" 15,000 psi

Weight w/ Wedglocks Single STD X Flange 23,100 lb 38,100 lb

Weight w/ Wedglocks Double STD X Flange 36,600 lb 58,400 lb

Weight w/ Lockscrews Single STD X Flange 21,900 lb 36,600 lb

Weight w/ Lockscrews Double STD X Flange 42,400 lb 55,400 lb

Height S ingle STD X Flange 41.25” 47.37”

Height Single Hub X Hub 41.12” 51.12”

Height Double STD X Flange 67.75” 76.59”

Height Double Hub X Hub 68.62” 80.25”

BOP Size and Working Pressure 18-5/8" 10,000 psi 18-5/8" 15,000 psi

Length Wedglocks Bonnets Closed 151.00” 151.00”

Length Wedglocks Bonnets Open 184.00” 184.00”

Length Lockscrews Locked Bonnets Closed 158.38” 164.68”

Length Lockscrews Unlocked Bonnets Open 218.38” 221.75”

Height Closing Single Volume STD X Flange 20.20 Gallon 24.30 Gallon

Height Height Opening Closing Single Double Volume Ratio Hub X Hub STD X Flange 19.40 Gallon 10.3:1 22.40 Gallon 6.7:1

Height Opening Double Ratio Hub X Hub 3.2:1 3.1:1

42

TL BOP Dimensions, Weights and Components 18-3/4” 5000 psi WP TL BOP Specifications *Weight

Height

33.5”

Length Bonnets Closed 147.10”

Length Bonnets Open 180.03”

Closing Volume 20.2 gal.

Opening Volume 19.4 gal.

Closing Ratio 10.3:1

Opening Ratio 2.3:1

Single Studded x Flange w/ Wedgelocks

18,700 lb

Single Studded x Flange w/ Lockscrews

17,500 lb

33.5”

148.0”

207.0”

20.2 gal.

19.4 gal.

10.3:1

2.3:1

Double Studded x Flange w/ Wedgelocks Double Studded x Flange w/ Lockscrews

36,000 lb

59.25”

147.10”

180.03”

20.2 gal.

19.4 gal.

10.3:1

2.3:1

33,600 lb

59.25”

148.0”

207.0”

20.2 gal.

19.4 gal.

10.3:1

2.3:1

59 1

8

60

19

18

51

61

9

17

15

16

11 22

24

58

21

17

16

55

56

43 34

52

42 2

36

25

44

14 12

13

54

10

21

20

32 23

48 46

61 40

26

33

51

37

6

35

3

35

5

60

50 28

39 49 24

30

27

29

31

38 7

43

41 38

37

33

31

4

30

35

6

3

35

47

7

TL BOP Exploded View

45

SD-11128-99

18-3/4” 5000/10,000 psi WP TL BOP Components I tem

Descri ption

It em

D escript ion

I tem

Descri ption

Item

Descri pt ion

1

Body

16

Secondary Conn.Rod Seal Ring

31

O-Ring, Operating Cylinder Seal

46

O-Ring, Head Lock Side

2

Bonnet

17

Ba ck-Up R ing

32

Wear Ring, Operating Piston

47

O-Ring, Head Unlock Side O-Ring, Wedgelock Piston

3

Operating Piston Subassembly

18

Connecting Rod Seal Retain er Ring

33

Wear RIng, Ram Change Piston

48

4

R am Ch an ge Pis to n, Op en

19

Spirolox Retaining Ring, Conn. Rod

34

O-RIng

49

Wedgelock Seal Ring Wedgelock Piston Seal Ring

5

Ram Change Piston, Close

20

Bonnet Seal Carrier

35

O-Ring, Ram Change Cylinder

50

6

R am C ha ng e C yl in de r

21

Bonnet Seal

36

Ram Chg Piston Seal Ring (3.25”ID)

51

Lifting Eye

7

R am Ch an ge Ac ce ss Ca p

22

O-Ring, Bonnet Seal Carrier

37

Ram Chg Piston Seal Ring (3.5”ID)

52

Vent Plug Dowel Pin

8

Bonnet Stud

23

Operatin g Piston Cylinder

38

O-Ring, Ram Change Access Cap

54

9

Bonnet Cap Nut

24

Wedgelock Housing

39

Wedgelock

55

P at en t Na me pl at e Ram Type BOP Nameplate

10

R am Guide Pin

25

Double-Ended Stud

40

W ed ge lo ck P is to n

56

11

Spirolox Retaining Ring

26

Hea vy He x Nut

41

Stud

58

Double-Ended Stud He avy H ex N ut

12

Primary Connecting Rod Retainer

27

Tail Rod Seal Ring

42

Stud

59

13

Back-Up RIng

28

Tail Rod Retainer Ring

43

He avy H ex Nut

60

Tubing Gla nd

14

Primary Connectin g Rod Seal Ring

29

Spirolox Retaining Ring, Tail Rod

44

Lock Side Wedgelock Hsng Head

61

Blind Plug

Connecting Rod Ring Spacer

30

Operatin g Piston Seal Ring

45

Unlock Side Wedgelock Hsng Head

15

43

UL and UM BOPs

The Cameron UL and UM BOPs are lightweight blowout preventers designed for easy maintenance and long life. Both designs complement the existing line of U preventers with interchangeable bonnets which can be installed on any comparable size U BOP. In addition, the bonnet of the UM BOP features full stroke operation for one-step ram removal. Other features of the UL and UM BOPs include:

• Bonnet seal carrier is available to eliminate the need for high makeup torque on bonnet studs and nuts. • Hydraulically operated locking mechanisms, wedgelocks, are available for subsea applications. • Most operating system seals can be replaced with the bonnet in the ramchange position without removing the bonnets. • The UL and UM BOPs utilizes the same rams as the U BOP. Other features include hydraulically opening bonnets, forged body and a wide selection of rams to meet all applications.

SD-11255-99

UL Blowout Preventer

44

UL BOP Components 34 22

5

33

37

35

3

30

23

31

26

27

39

32

42

6

31

20

38

28

29

41

34

33

43

4

37

35

6

24

46 47

25

36

2

40

51

10

14

12

11

1

UL BOP Exploded View SD-11256-99

19

50

18

16

17

17

16

15

13

SD-11256-99

WP UL BOP Components Item 1

Description Solid Block Body

Qty. 1

Item 26

Nut for Cylinder Head

8 2

Description

Qty.

2

Bonnet

2

27

Seal Ring, Tail Rod Seal

3

Operating Piston

2

28

Retainer Ring, Tail Rod Seal

2

Retaining Ring, Spirolox, Tail Rod

2

4

Ram Change Piston, Open

2

29

5

Ram Change Piston, Close

2

30

Seal Ring,Operating Piston Seal

2

6

Ram Change Cylinder

4

31

O-Ring, Operating Cylinder

4

7

Ram Change Piston, Open

1

32

O-Ring, Booster Piston Retainer

2

10

Ram Guide Pin

4

33

Seal Ring

4

11

Retaining Ring, Spirolox, Connecting. Rod (Primary)

2

34

Wear Ring, Ram Change Piston

4

12

Retaining Ring, Primary Connecting Rod Seal,

2

35

O-Ring, Ram Change Cylinder

8

13

Back-Up Ring, Primary Connecting Rod Seal,

2

36

O-Ring, Ram Change Piston to Bonnet

4

O-Ring, Ram Change Piston to Body

4

14

Seal Ring, Primary Connecting Rod Seal

2

37

15

Retainer Ring, Secondary Connecting Rod Seal,

2

38

Stud, Lock Screw Housing

16

16

Seal Ring, Seal for Secondary Connecting Rod

4

39

Nut, Lock Screw Housing

16

17

Back-up Ring for Secondary Connecting Rod Seal and

4

40

Lifting Eye, 2-1/8” Diameter

2

41

Booster Piston Retainer

2

Hydraulic Seal, Connecting Rod (Secondary) 18

Retainer Ring for Hydraulic Connecting Rod Seal,

2

42

Booster Piston

2

19

Retaining Ring, Spirolox

2

43

Booster Piston Seal

2

20

Locking Screw

2

46

Nameplate, Ram Type BOP, API 16A

1

Nameplate, Patent - U BOP

1

22

Locking Screw Housing

2

47

23

Operating Cylinder

2

50

Bonnet Bolt

8

2 8

51

Bonnet Seal, Compression Type

2

24 25 Note: 

Cylinder Head Stud for Cylinder Head

Quantities listed are for a single ram BOP.

45

DL Annular Blowout Preventer • Twin seals separated by a vented chamber positively isolate the BOP operating system from well bore pressure. High strength polymer bearing rings prevent metal-to-metal contact and reduce wear between all moving parts of the operating systems. • All Cameron DL BOPs are manufactured to comply with NACE specification MR-01-75 for H 2S service. • Packers for DL BOPs have the capacity to strip pipe as well as close and seal on almost any size or shape object that will fit into the wellbore. These packers will also close and seal on open hole. Some annular packers can also be split for installation while pipe is in the hole. Popular sizes of the DL BOP are available with high-performance CAMULAR™ annular packing subassemblies. See page 50 for information on high temperature CAMULAR products. The Cameron DL BOP is available in sizes from 7-1/16” to 21-1/4” and in working pressures from 2000 to 20,000 psi.

In the unique design of the Cameron DL annular BOP, closing pressure forces the operating piston and pusher plate upward to displace the solid elastomer donut and force the packer to close inward. As the packer closes, steel reinforcing inserts rotate inward to form a continuous support ring of steel at the top and bottom of the packer. The inserts remain in contact with each other whether the packer is open, closed on pipe or closed on open hole. Other features of the DL BOP include: • The Cameron DL BOP is shorter in height than comparable annular preventers. • A quick-release top with a one-piece split lock ring permits quick packer change-out with no loose parts involved. The design also provides visual indication of whether the top is locked or unlocked. • The DL BOP is designed to simplify field maintenance. Components subject to wear are field-replaceable and the entire operating system may be removed in the field for immediate change-out without removing the BOP from the stack.

Packer Inserts Bore of Top Quick-Release Top

Access Flaps

Outer Cylinder Lock-Down

Locking Grooves in Body

Packer Vent

Donut

Pusher Plate

Opening Side of Piston

Closing Side of Piston

Opening Hydraulic Ports Closing Hydraulic Ports

SD-203-03

Operating Piston

Vent

Cameron DL Annular Blowout

46

D and DL Annular BOP Dimensions, Weights and Components Comparative Size and Weight Data (All Models Flanged)

16

Size and Working Pressure

17 11

37 10

46

9

12

45

67

2

66

Height (Inches)

Diameter (Inches)

Weight (Pounds)

Gallons to Close

Gallons to Open

7-1/16" 3000 psi

23-15/16

27-7/8

2738

1.69

1.39

7-1/16" 5000 psi

25-1/2

7-1/16" 10,000 psi

34-7/32

27-7/8

2778

1.69

1.39

37-3/8

7255

2.94

2.55

7-1/16", 15,000 psi

44-3/4

43-1/4

12,000

6.94

6.12

7-1/16", 20,000 psi

50-3/4

48

17,716

8.38

7.56

11", 3000 psi

32-1/2

41-1/4

8255

5.65

4.69

11", 5000 psi

34-15/16

41-1/4

8447

5.65

4.69

11", 10,000 psi

41-1/16

48-1/2

13,954

10.15

9.05

11", 15,000 psi

62-1/2

61

36,500

23.50

21.30 10.34

13-5/8" 3000 psi

36-11/16

50

12,855

12.12

13-5/8", 5000 psi

40-3/16

52-3/8

16,215

12.12

10.34

13-5/8", 10,000 psi

49-3/32

61

27,262

18.10

16.15

16-3/4" 3000 psi

47

60-1/2

25,950

22.30

19.00

16-3/4" 5000 psi

49

60-1/2

26,300

22.30

19.00

18-3/4" 5000 psi

60-13/16

62

29,560

35.60

29.00

18-3/4" 10,000 psi

70-1/2

67

40,632

51.00

45.10

20-3/4" 3000 psi

54-3/4

66

29,500

40.50

28.40

21-1/4" 2000 psi

53-5/16

66

29,000

40.50

28.40

Annular Blowout Preventer Components 7

Item No.

36 6 55

15

50 31

69 57 60 52

58

4

59 14

13

53 63

68

64

56

65

5

3 51 62

54

61 29 34

30

Item No.

Description

1

Body

43

Stud

2

Top

44

Nut

3

Piston

45

Bushing Retaining Screw

4

Inner Cylinder Head

46

Oil Injection Fitting

5

Outer Cylinder Head

47

Lifting Eye*

6

Pusher Plate

50

Support Plate Bearing Ring

7

Donut & Packer**

51

Piston ID Bearing Ring

9

Lock Ring

52

Inner Cylinder OD Bearing Ring

10

Actuator Ring

53

Outer Cylinder ID Bearing Ring

11

Actuator Screw

54

Piston OD Bearing Ring

12

Actuator Screw Bushing

55

Pusher Plate Bearing Ring

13

Outer Cylinder Lock Segment

56

Outer Cylinder ID Wiper Ring

14

Lock Segment Retaining Ring

57

Inner Cylinder OD Wiper Ring

15

Support Plate

58

Inner Cylinder ID Lip Seal

16

Top Trash Seal

59

Inner Cylinder ID Lip Seal

17

Actuator Screw Bearing

60

Inner Cylinder OD Lip Seal

29

Anchor Shackle

61

Piston ID Lip Seal

30

Inner Cylinder Stud

62

Piston OD Lip Seal

31

Inner Cylinder Nut

63

Outer Cylinder ID Lip Seal

32

Stud

64

Outer Cylinder OD Lip Seal

33

Nut

65

Outer Cylinder OD Lip Seal

34

Lock Ring Access Port Plug

66

Top ID Lip Seal

35

Hydraulic Port Plug

67

Top OD Lip Seal

36

Pusher Plate Screw

68

Outer Cylinder ID Lip Seal

37

Actuator Ring Stop Screw

69

Inner Cylinder OD Lip Seal

38

Lifting Eye*

75

Inner Cylinder ID Backup Ring*

39

Lifting Eye*

76

Inner Cylinder OD Backup Ring*

40

Lifting Eye*

77

Outer Cylinder ID Backup Ring*

41

Lifting Eye*

78

Top ID Backup Ring*

42

Lifting Eye*

A complete replacement kit for seals, bearings and scrapers is available. *Not shown on the illustration. **CAMULAR™ high-performance donuts and packers are available for most sizes and working pressures  of the annular BOP.

1 SD-5306

35

Description

Annular BOP Components 47

7-1/16" 3000 - 11" 15,000 psi WP D and DL Annular BOP Part Numbers Item

7-1/16" 3000 and 5000 psi

Description Qty

3 Piston 4 Inner Cylinder Head 5 Outer Cylinder Head` 6 Pusher Plate 7 Donut & Packer**** 9 Lock Ring 10 Actuator Ring 11 Actuator Screw 12 Actuator Screw Bushing 13 Outer Cylinder Lock Segment 14 Lock Segment Retaining Ring 15 Support Plate 16 Top Trash Seal 17 Act uator Screw Bearing 29 Anchor Shackle 30 Inner Cylinder Stud 31 Inner Cylinder Nut 32 Stud 33 Nut 34 Lock Ring Access Port Plug 35 Hydraulic Port Plug 36 Pusher Plate Screw 37 Actuator Ring Stop Screw 38 Lifting Eye* 39 Lifting Eye* 40 Lifting Eye* 41 Lifting Eye* 42 Lifting Eye* 43 Stud 44 Nut 45 Bushing Retaining Screw 46 Oil Injection Fitting 47 Lifting Eye* 50 Support Plate Bearing Ring 51 Piston ID Bearing Ring 52 Inner Cyl. OD Bearing Ring 53 Outer Cyl. ID Bearing Ring 54 Piston OD Bearing Ring 55 Pusher Plate Bearing Ring 56 Outer Cyl. ID Wiper Ring 57 Inner Cyl. OD Wiper Ring 58 Inner Cylinder ID Lip Seal 59 Inner Cylinder ID Lip Seal 60 Inner Cylinder OD Lip Seal 61 Piston ID Lip Seal 62 Piston OD Lip Seal 63 Outer Cylinder ID Lip Seal 64 Outer Cylinder OD Lip Seal 65 Outer Cylinder OD Lip Seal 66 Top ID Lip Seal 67 Top OD Lip Seal 68 Outer Cylinder ID Lip Seal 69 Inner Cylinder OD Lip Seal 75 Inner Cyl. ID Backup Ring* 76 Inner Cyl. OD Backup Ring* 77 Outer Cyl. ID Backup Ring* 78 Top ID Backup Ring* *** Complete Replacement Kit

1 1 1 1 1 1 1 4 4 1 1 8 4 8 8 2 2 24 4 4 4 4 4 4 4 1 1 1 1 1 1 1 1 1 1 2 1 1 2 1 1 1 1 1

Part No.

699333-01 699334-01-02 699335-01 699336-01 644856-02† 699337-01 699338-01 49089-03 699343-03 __ __ 2010341-01 46045-05 699344- 03 701002 46037-24 49800-01 __ __ 5930-04-10 5930-04- 10 46052-04 46052-03 700734 12185-03 12185-02 700735 __ __ __ 5940-01-18 700710 __ 49122-01 2010196-13 2010196-01 2010196-02 2010196-14 699345- 04 700713 700715 615851-31-01 615851-32-01 615847-30-01 615851-33-01 615847-31-01 615851-30-01 615847-29-01 615847-28-01 615851-29-01 706258-11 __ __ __ __ __ __ 49742-01

7-1/16" 10,000 psi Qty

1 1 1 1 1 1 1 4 4 1 1 8 4 12 12 2 2 24 4 4 4 4 4 4 4 4 1 1 1 1 1 1 1 1 1 1 2 1 1 2 1 1 1 1 1

Part No.

699333-02 699334-02-02 699335-02 699336-02 644856-03† 699337-02 699338-02 49089-01 699343-01 __ __

7-1/16" 15,000 psi Qty

1 1 1 1 1 1 1 4 4 2010341-02 1 46045-06 1 699344-01 8 701003 4 46037-16 12 49800-01 12 __ __ 5930-05-10 2 5930-05-10 2 46052-05 24 46052-01 4 700734 4 12185-03 4 12185-02 4 700735 4 __ __ __ 702514-25-20-08 4 700710 4 12185-01 49122-02 1 2010196-15 1 2010196-03 1 2010196-04 1 2010196-16 1 699345-05 1 700810 1 700809 1 615850-24-01 1 615851-26-01 1 615847-26-01 1 615851-27-01 1 615847-27-01 1 615851-25-01 1 615847-25-01 1 615847-24-01 1 615850-23-01 1 706258-04 1 __ 1 __ 1 __ __ __ __ 1 49742-02 1

Part No.

699333-10 699334-10 699335-10 699336-10 644856-11-00-01 699337-10 699338-10 49089-01 699343-01 __ __

7-1/16" 20,000 psi Qty

1 1 1 1 1 1 1 4 4 3 1 049793-15 1 46045-14 1 699344- 01 8 663311-13 4 46037-30 12 49800-08 12 __ __ 5930-07-10 2 5930-05- 10 2 46052-08 24 46052-01 4 12185-03 4 12185-02 4 700735 4 700734 2 __ __ __ 702514-25-20-08 4 700710 4 __ 49122-07 1 2010196-36 1 2010196-33 1 2010196-34 1 2010196-35 1 699345- 08 1 705151 1 705152 1 615850-37-01 1 615851-35-01 1 615846-26-01 1 615851-36-01 1 615847-35-01 1 615850-36-01 1 615847-32-01 1 615847-33-01 1 615850-35-01 1 706258-01 1 615851-34-01 1 615847-34-01 1 __ 1 __ 1 __ 1 615399-07 1 49742-13 1

*Not shown on the drawing  ***Seals, bearings and scrapers  ****These items are sold as a subassembly (packer and donut). †CAMULAR™ 

48

Part No.

11" 3000 and 5000 psi Qty

Part No.

1 1 1 1 1 1 1 4 4 3 1 1 1 8 4 6 6 5930-07-10 2 5930-05-10 2 46052-08 24 46052-01 4 12185-03 4 12185-02 4 700735 2 700734 4 __ 2 __ __ 702514-25-20-08 4 700710 2 __ 2 49122-07 1 2010196-32 1 2010196-33 1 2010196-34 1 2010196-31 1 699345-08 1 705151 1 705152 1 615851-35-01 1 615850-37-01 1 615846-26-01 2 615851-36-01 1 615847-37-01 1 615850-36-01 2 615847-36-01 1 615847-36-01 1 615850-35-01 1 706258-05 1 615851-34-01 615847-34-01 615378-02 615622-02 615378-03 615378-04 49742-03 1

699333-03 699334-27 699335-27 699336-03 644856-04† 699337-27 699338-27 49089-01 699343-01 614350-03 49416-03 2010341-03 46045-11 699344- 01 701004 46037-17 49800-04 __ __

699333-11 699334-11-01 699335-11 699336-11 644856-11-00-01 699337-11 699338-11 49089-01 699343-01 614350-02 49416-02 2010341-11 46045-10 699344-01 663311-13 392002-09-00-70 49800-03 __ __

11" 10,000 psi Qty

Part No.

1 1 1 1 1 1 1 4 4 3 1 1 1 8 4 8 8 5930-05-10 2 5930-05- 10 2 46052-06 24 49477-01 4 11849 4 12185-03 4 12185-01 2 12185-02 700735 __ __ 702514-25-20-08 4 700594 2 701960 49122-03 1 2010196-17 1 2010196-05 1 2010196-06 1 2010196-18 1 699345- 02 1 700619 1 700618 1 615850-15-01 1 615850-14-01 1 615847-17-01 1 615851-16-01 1 615847-16-01 1 615851-17-01 1 615846-04-01 615846-03-01 1 615850-13-01 1 706258-02 1 __ 1 __ 1 __ __ __ __ 49742-09 1

699333-04 699334-28 699335-28 699336-04 644856-05† 699337-28 699338-28 49089-01 699343- 01 614350-04 49416-04 2010341-07 46045-12 699344-01 663311-13 46037- 19 49800-05 __ __

11" 15,000 psi Qty

Part No.

1 1 1 1 1 1 1 4 4 3 1 1 1 8 4 12 12 5930-07-10 2 5930-05-10 2 46052-07 24 49477-01 4 11849 4 12185-03 4 12185-02 2 __ __ __ __ 702514-25-20-08 4 700594 2 __ 49122-04 1 2010196-19 1 2010196-07 1 2010196-08 1 2010196-20 1 699345-06 1 700812 1 700811 1 615850-40-01 1 615850-41-01 1 615847-38-01 1 615851-38-01 1 615847-39-01 1 615851-37-01 1 __ 1 615846-27-01 615850-38-01 1 706258-03 1 615850-39-01 1 615846-28-01 1 __ 1 __ 1 __ 1 __ 1 49742-10 1

699333-38 699334-38 699335-38 699336-38 644800-38 699337-38 699338-38 49089-01 699343-01 614350-09 49416-09 2010341-13 46045-15 699344-02 663311-13 46037-26 49800-05 __ __ 614271-03 5930- 06-10 46052-10 46052-01 11849 12185-03 12185-02 __ __ __ __ 702514-25-20-08 700594 __ 49122-10 2010196-40 614246-49 614246-50 2010196-39 699345-10 706452 706451 615850-28-01 615850-27-01 615846-21-01 615850-25-01 615846-19-01 615850-26-01 615846-20-01 __ 615850-29-01 46001-01-42 615850-28-01 615846-21-01 615378-01 615378-06 615378-06 615378-05 49742-14

13-5/8" 5000 - 21-1/4" 2000 psi WP D and DL Annular BOP Part Numbers Item 3 4 5 6 7 9 10 11 12 13 14 15 16 17 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 75 76 77 78 ***

13-5/8" 5000 psi

Description Piston Inner Cylinder Head Outer Cylinder Head` Pusher Plate Donut & Packer**** Lock Ring Actuator Ring Actuator Screw Actuator Screw Bushing Out er Cylinder Lock Segment Lock Segment Retaining Ring Support Plate Top Trash Seal Actuator Screw Bearing Anchor Shackle Inner Cylinder Stud Inner Cylinder Nut Stud Nut Lock Ring Access Port Plug Hydraulic Port Plug Pusher Plate Screw Actuator Ring Stop Screw Lifting Eye* Lifting Eye* Lifting Eye* Lifting Eye* Lifting Eye* Stud Nut Bushing Ret aining Screw Oil Injection Fitting Lifting Eye* Support Plate Bearing Ring Piston ID Bearing Ring Inner Cyl. OD Bearing Ring Outer Cyl. ID Bearing Ring Piston OD Bearing Ring Pusher Plate Bearing Ring Outer Cyl. ID Wiper Ring Inner Cyl. OD Wiper Ring Inner Cylinder ID Lip Seal Inner Cylinder ID Lip Seal Inner Cylinder OD Lip Seal Piston ID Lip Seal Piston OD Lip Seal Outer Cylinder ID Lip Seal Outer Cylinder OD Lip Seal Outer Cylinder OD Lip Seal Top ID Lip Seal Top OD Lip Seal Outer Cylinder ID Lip Seal Inner Cylinder OD Lip Seal Inner Cyl. ID Backup Ring* Inner Cyl. OD Backup Ring* Outer Cyl. ID Backup Ring* Top ID Backup Ring* Complete Replacement Kit

Qty 1 1 1 1 1 1 1 4 4 3 1 1 1 8 4 6 6 2 2 24 4 4 4 4 4 4 1 1 1 1 1 1 1 1 1 1 2 1 1 2 1 1 1 1 1

13-5/8" 10,000 psi

Part No. Qty Part No. 699333-05 1 699333-06 6 99334-05-02 1 6 99334-30 699335-05 1 699335-30 699336-05 1 699336-06 6 44856-06† 1 6 44856-07† 699337-05 1 699337-30 699338-05 1 699338-30 49089-01 4 49089-02 699343-01 4 699343-02 614350-05 3 614350-01 49416-05 1 49416-01 2010341-05 1 2010341-06 46045-01 1 46045-09 699344-01 8 699344-02 663311-13 4 663311-13 46037-19 12 46037-20 49800-05 12 49800-05 __ __ __ __ 5930- 07-10 2 5930- 08-10 5930-05-10 2 5930-06-10 46052-08 24 46052-09 46052-01 4 46052-02 11849 4 11849 12185-03 4 700649 12185-02 2 12185-01 __ 4 12185-03 __ 2 700446 __ __ __ __ 702514-254 702514-2520-08 20-08 700594 2 700594 __ __ 49122-05 1 2010196-21 1 2010196-09 1 2010196-10 1 2010196-22 1 699345-01 1 700320 1 700581 1 615850-21-01 1 615850-20-01 1 615847-22-01 1 615851-23-01 1 615847-21-01 1 615851-24-01 2 615846-11-01 1 615846-10-01 1 615850-19-01 1 706258-07 1 __ 1 __ 1 __ __ __ __ 49742-11 1

49122-06 2010196-23 2010196-11 2010196-12 2010196-24 699345-03 700319 700320 615850-32-01 615850-33-01 615847-40-01 615850-30-01 615846-22-01 615850-31-01 615846-23-01 615846-24-01 615850-34-01 706258-10 615851-28-01 615846-25-01 __ __ __ __ 49742-12

16-3/4" 3000 and 5000 psi Qty 1 1 1 1 1 1 1 4 4 3 1 1 1 8 4 8 8 2 2 24 4 4 4 2 4 4 2 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1

Part No. 699333-18 699334-18 6 99335-18 699336-18 644800-18 699337-18 699338-18 49089-02 6 99343-02 614350-07 4 9416-07 2010341-12 46045-08 6 99344-02 663311-13 46037-25 49800-06 __ __ 614271-01 5 930-06-10 46052-09 4 6052-02 11849 12185-02 12185-01 700446 __ __ __ 702514-2520-08 700594 __ 4 9122-08 2010196-30 2010196-25 2010196-26 2010196-42 699345-07 700994 700993 615850-44-01 615850-45-01 615846-27-01 615850-46-01 615846-29-01 615850-43-01 __ 615846-29-01 615850-42-01 706258-09 __ __ __ __ __ __ 4 9742-08

**Exploded view on page 47 is not representative of this assembly. ***Seals, bearings and scrapers. ****These items are sold as a subassembly (packer and donut). †CAMULAR™ 

49

18-3/4" 5,000 psi Qty 1 1 1 1 1 1 1 4 4 3 1 1 1 8 4 16 16 2 2 24 4 4 4 2 4 4 4 1 1 1 1 1 1 1 1 1 1 2 1 1 2 1 1 1

Part No. 699333-44 6 99334-44 699335-44 699336-44 6 44856-09 699337-44 699338-44 49089-04 699343-04 614350-13 49416-09 2010341-17 46045-18 699344-02 663311-13 46037-32 49800-07 __ __ 614271-02 5930-06-10 46052-14 46052-02 11849 700649 12185-03 12185-02 __ __ __ 702514-2520-08 700594 __ 49122-11 2010196-51 2010196-49 2010196-50 2010196-52 699345-14 708000 708003 615850-04-01 615851-01-01 615846-05-01 615850-03-01 615846-01-01 615850-02-01 __ 615846-02-01 615850-01-01 __ __ __ __ __ __ __ 49742-16

18-3/4" 10,000 psi Qty 1 1 1 1 1 1 1 4 4 3 1 1 1 8 4 16 16 2 2 24 4 4 4 2 4 4 2 1 1 1 1 1 1 1 1 1 2 1 1 2 1 1 1 1 1

Part No. 699333-21 699334-21 6 99335-21 699336-21 644856-01† 699337-21 699338-21 49089-02 6 99343-02 614350- 06 4 9416-06 615483-01 46045-16 6 99344-02 663311-13 46037-27 49800-07 __ __ 614271- 01 5 930-06-10 46052-11 4 6052-02 11849 700649 12185-03 12185-02 __ __ __ 702514-2520-08 700594 __ 6 15482-01 2010196-29 2010196-47 2010196-28 2010196-30 699345-13 705710 705711 615851-02-01 615850-08-01 615846-16-01 615850-09-01 615846-15-01 615850-07-01 __ 615846-14-01 615850-01-01 706258-12 __ __ __ __ __ 615378-01 4 9742-17

20-3/4" 3000 psi** Qty 1 1 1 1 1 1 4 16 16 20 20 2 24 4 2 2 36 36 -

Part No. 699333-47 6 99334-47 644172-01 699336-47 6 44800-47 __ __ __ __ __ __

1 1 1 1 1 1 1 1 1 1 1 2 1

__ __

21-1/4" 2000 psi**

Qty Part No. 1 699333-47 1 699334-47 1 644172-01 1 699336-47 1 644800-47 __ __ __ __ __ __ 2010341-18 1 2010341-18 __ __ __ __ 663311-13 4 663311-13 46037-34 12 46037-34 49800-12 12 49800-12 5919-08 24 6306-16-10 2709000-18-09 24 2709000-15-09 5930-06-10 2 5 930-06- 10 __ __ 46052-15 24 46052-15 46052-16 4 46052-16 700649 2 700649 12185-02 4 12185-02 __ __ __ __ __ __ 615447-01-10 24 615447-02-10 2709000-19-09 24 2709000-19-09 __ __ -

49122-12 2010196-53 2010196-54 2010196-55 2010196-56 __ __ 615399-12 615850-12-01 615851-03-01 615846-18-01 615850-11-01 615846-17-01 __ 615850-10-01 __ __ __ __ __ __ __ __ __ 49742-18

1 1 1 1 1 1 1 1 1 1 1 2 1

__ __ 49122-12 2010196-53 2010196-54 2010196-55 2010196-56 __ __ 615399-12 615851-03-01 615850-12-01 615846-18-01 615850-11-01 615846-17-01 __ 615850-10-01 __ __ __ __ __ __ __ __ __ 49742-18

D and DL BOP Replacement Part Kits For popular size D and DL BOPs, a BOP replacement part kit is available to provide all seals, bearings and scrapers required during normal maintenance. Kit parts are shrink-film packed to prevent loss and assure long shelf life and are less expensive than individual parts. All parts in each kit are identified with part numbers and parts list index numbers. As an optional replacement for the standard lip seal design, a D-shaped seal is available for service in annular BOPs that have pitted, corroded or oversized seal grooves. To enhance the performance life of the used annular BOP, this seal

design will fill most voids created from excessive wear and tear to the seal groove. Seal kits have been created which include all the operating system seals for the annular BOPs listed below.

16 17

D BOP Replacement Part Kit Part Numbers BOP Size 7-1/16"

3000, 5000

49742-01

'D' Seal Kit __

7-1/16"

10,000

49742-02

__

7-1/16"

15,000

49742-13

__

7-1/16"

20,000

49742-03

__

11"

3000,5000

49742-09

__

11"

10,000

49742-10

__

11"

15,000

49742-14

__

5000

49742-11

2010006-01

13-5/8"

10,000

49742-12

16-3/4"

3000,5000

49742-08

2010006-05 __

18-3/4"

5000

49742-16

2010006-04

18-3/4"

10,000

49742-17

20-3/4"

3000

49742-18

2010006-03 __

21-1/4"

2000

49742-19

__

13-5/8"

Pressure Rating (psi)

Replacement Kit

67

66

55 50

57

Replacement Part Kit Components Item Number* 16 17 50 51 52 53 54 55 56 57 58 59 60 61 62

Quantity 1 8 1 1 1 1 1 1 1 1 1 1 2 1 1

63 64

2 1

Seal Ring Seal Ring

65 66 67

1 1 2

Seal Ring Seal Ring Seal Ring

52

Description Top Trash Seal Actuator Screw Bearing Inner Cylinder Head Ring Bearing Bearing Bearing Bearing Wear Ring Wiper Ring Wiper Ring Seal Ring Seal Ring Seal Ring Seal Ring Seal Ring

60 58 59 53 56 64 63

65

51

61

54

62

SD-5306

D BOP

*Item numbers are standard bill of material numbers for a complete assembly.

Higher Temperatures For temperatures greater than 250°F and high H 2S levels, CAMULAR severe service elastomer is recommended. The D BOP packing element comes only as a complete subassembly, which includes packer and donut Contact your local Cameron representative for details. CAMULAR part numbers are listed on pages 48-49.

Packer

Donut SD-5306

D BOP Packing Element Subassembly 50

S/QRC and G-2 Snubbing BOPs The Cameron S/QRC and G-2 snubbing blowout preventers are used in well workover and servicing operations. S/QRCs are ram-type preventers which maintain pressure control for all types of workover wells. The Cameron G-2 BOP is suitable for wells requiring a 4-1/16" 5000 or 10,000 psi or 7-1/16" 5000 psi snubbing preventer.

• Safety packers seal around tubing in the well bore. Tubing can be stripped or snubbed through these packers, if necessary. • Wear insert packers are for stripping and snubbing service. These subassemblies have a wear insert which can be easily replaced to renew the packer. • Slip inserts are used to hold the tubing string after shearing or during workover operations by supporting upward and downward forces as well as torsional forces. • Wireline ram guides have hardened steel guiding surfaces and are replaceable. • No special operating system is required for shearing. • All S/QRC and G-2 rams are suited for H2S service per NACE MR-01-75.

S/QRC and G-2 BOP Rams Cameron S/QRC and G-2 snubbing BOPs can be equipped with the proper rams to perform a full range of snubbing preventer operations. Four types of ram bodies are available for the 4-1/16" 10,000, 15,000 and 25,000 psi S/QRC and 4-1/16" 5000 and 10,000 psi G-2 BOPs. These include blind, pipe, shear and wireline rams. Pipe rams can be fitted with safety packers, wear insert packers or slip inserts. Blind and pipe rams are available for all sizes. Features include:

SD-10821

S/QRC Workover BOP (Available in 3-1/16" 20,000 psi, 4-1/16" 10,000, 15,000 and 25,000 psi and 7-1/16" 20,000 psi)

SD-10822

G-2 Workover BOP (Available in 4-1/16" 5000 and 10,000 psi and 7-1/16" 5000 psi)

51

S/QRC and G-2 BOP Rams Wear Insert Packer Wear Insert Subassembly

SD-5169-3

SD-5169-2

Safety Packer

SD-5169-4

Slip Insert Subassembly

Wear Insert Packer Subassembly

Pipe Ram Part Numbers Tubing Size

Safety Packer* Ram Assembly**

Safety Packer**

Pipe Ram Body**

Blind

46955-01

46941-01

46938

1.050"

46955-02

46941-04

1.315"

46955-03

46941-03

1.660"

46955-04

46941-02

1.900"

46955-05

2.000"

46955-06

2.062"

Top Seal** 46950

Wear Insert Packer Subassembly** __

Wear Insert Packer** __

Wear Insert Subassembly** __

Slip Insert Subassembly** __

46940-03

46950

614267-01

614262-01

614259-01

614442-01

46940-02

46950

614267-02

614262-02

614259-02

614442-02

46940-01

46950

614267-03

614262-03

614259-03

614442-03

46942-01

46940-04

46950

614267-04

614262-04

614259-04

614442-04

46942-02

46940-05

46950

614267-05

614262-05

614259-05

614442-05

46955-07

46942-03

46940-06

46950

614267-06

614262-06

614259-06

614442-06

2.375"

46955-08

46942-04

46939-01

46950

2.875"

46955-09

46942-05

46939-02

46950

614267-07 __

614262-07 __

614259-07 __

614442-08

614442-07

*Includes pipe ram body, top seal and safety packer. **2 of each required.

Shear Blade Upper Ram Body Lower Ram Body Bolt

SD-5219

Blade Retainer

Shear Ram

Shear Ram Part Numbers (Sealing-Type Shear Ram Available for 4-1/16" and 7-1/16" 5000 psi Not Shown)

BOP BOP Description Description

Shear Ram Assembly*

Upper Ram Body

Lower Ram Body

Qty Part Number

Qty Part Number

Shear Blade

Blade Retainer Qty Part Number

Bolts

Qty

Part Number

Qty

Part Number

4-1/16" 5000 and 10,000 psi G-2

1

614411-01

1

614402-02

1

614402-01

1

614413-01

2

614414-01

Qty

4 702585-14-00-24

Part Number

4-1/16" 10,000 and 15,000 psi S/QRC

1

614411-01

1

614402- 02

1

614402-01

2

614413- 01

2

614414-01

4 702585- 14-00-24

4-1/6" 25,000 psi S/QRC

1

644254-01

1

644253-01

1

644253-02

2

644252-01

2

644252-01

2

701683

*Shear ram assembly includes upper and lower shear rams.

Top Seal

Wireline Guide Upper Ram Body SD-10819

Wireline Packer Lower Ram Body Screw**

Wireline Ram

Wireline Ram Part Numbers (4-1/16" 5000 and 10,000 psi G-2 and 4-1/16" 10,000 and 15,000 psi S/QRC)

Wireline Size (In.)

Wireline Ram Assembly* (1 Required)

Upper Ram Body (1 Required)

Lower Ram Body (1 Required)

Top Seal (2 Required)

Wireline Packer (2 Required)

Wireline Guide (2 Required)

0-0.250

614263-06

614236-01

614235-01

46950

46941-10

614264-01

0.312

614263-01

614236-01

614235-01

46950

46941-05

614264-01

0.438

614263-02

614236-02

614235-02

46950

46941-06

614264-02

0.562

614263-03

614236-03

614235-03

46950

46941-07

614264-03

0.750

614263-04

614236-04

614235-04

46950

46941-08

614264-04

0.875

614263-05

614236-05

614235-05

46950

46941-09

614264-05

*Wireline ram assembly includes upper and lower wireline rams. **Screw part number: 702507-06-00-06.

52

Clamp Connections Bearing Ring

Load Ring

SD-7039

Nut

Forged Thru-Bolt Cameron Clamp Part Numbers Bore Size and Working Pressures (psi) 1-13/ 16" 10,000 1- 13/ 16" 15,000 1-13/16" 20,000 2-1/16" 5000 2-1/16" 10,000 2-1/16" 15,000 2-1/16" 20,000 2-9/16" 5000 2-9/16" 10,000 2-9/16" 15,000 2-9/16" 20,000 3-1/8" 5000 3-1/8" 10,000 3-1/8" 15,000 3-1/8" 20,000 4-1/16" 5000 4-1/16" 10,000 4-1/16" 15,000 4-1/16" 20,000 7-1/16" 2000 7-1/16" 5000 (RX) 7-1/16" 5000 (BX) 7-1/16" 10,000 (RX) 7-1/16" 10,000 (BX) 7-1/16" 15,000 (RX) 7-1/16" 15,000 (BX) 7-1/16" 20,000 9" 5000 9" 10,000 11" 3000 11" 5000 11" 10,000 11" 15,000 13-5/8" 3000 13-5/8" 5000 13-5/8" 10,000 13-5/8" 15,000 16-3/4" 2000 16-3/4" 3000 16-3/4" 5000 16-3/4" 10,000 18-3/4" 10,000 18-3/4" 15,000 18-3/4" 15,000† (HBC) 20-3/4" 2000 20-3/4" 3000 21-1/4" 2000 21-1/4" 5000 21-1/4" 7500 21-1/4" 10,000 24-1/4" 1000 30-1/2" 1000 34" 1000 36" 1000

Seal Ring Number RX 20 20 __ 23 23 23 __ 24 24 24 __ 27 27 27 __ 35 35 __ __ 45 45 __ 45 __ 45 __ __ 49 49 53 53 __ __ 57 57 57 __ 65 65 __ __ __ __ __ 73 73 73 __ __ __ __ __ __ __

BX 1 51 1 51 151 152 152 152 152 153 153 153 153 154 154 1 54 154 155 155 155 155 __ __ 156 __ 156 __ 156 156 157 157 __

                     

AX __ __ __ __ __ __ __ __ __ __ __

41700-27   __ 41700-25   __   __ 41700-24   __   __ __ 41700-02   __ __   __ __   __   __   __   __

41700-06 158   __ 158 41700-08 158   __ __ 41700-11 160 41700-13 159 41700-15 __ 159 __ 41700-17 __ __

CX __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __

13 13 __ __ 161 41700-19 __ __ 162   __ __ 164 18 __ 164 18 __ 164 18 __ __ __ __ __ __ __ __ __ __ 165 21 __ 166 21 __ 166 21 __ __ __ __ __ __ __ __ __ __ __ __

Clamp Assembly Part No.

Clamp Part No. 644021 (2 Reqd)

Bolt Part No. (4 Reqd)

615236-01 615236-02 615236-03 615236-01 615236-02 615236-03 615236-03 615236-02 615236-04 615236-03 615236-06 615236-04 615236-05 615236-06 615236-08 615236-05 615236-06 615236-08 615236-10 615236-25 615236-07 615236-08 615236-08 615236-10 615236-10 615236-22 615236-15 615236-08 615236-10 615236-09 615236-10 615236-22 615236-15 615236-11 615236-13 614925-03 614925-03 615236-12 615236-14 615236-19 615236-28 645490-01 645490-01 645490-01 615236-18 615236-18 615236-18 614925-02 614925-02 614925-02 615236-21 615236-20 615236-24 615236-23

()-01 ()-02 ()-03 ()-01 ()-02 ()-03 ()-03 ()-02 ()-04 ()-03 () -06 ()-04 ()-05 ()-06 ()-08 ()-05 ()-06 ()-08 ()-10 ()-25 ()-07 ()-08 ()-08 ()-10 ()-10 ()-22 ()-15 ()-08 ()-10 ()-09 ()-10 ()-22 ()-15 ()-11 ()-13 ()-15 ()-28 ()-12 ()-14 ()-19 ()-28 ()-27 ()-26 ()-32 ()-18 ()-18 ()-18 ()-27 ()-26 ()-26 ()-21 ()-20 ()-24 ()-23

5912-60-10 702533-08-10-80 702533-09-10-90 5912-60-10 702533-08-10-80 702533-09-10-90 702533-09-10-90 702533-08-10-80 702533-09-10-82 702533-09-10-90 7 09949 702533-09-10-82 702533-09-10-82 7 09949 702533-13-11-32 702533-09-10-82 702533-10-10-93 702533-13-11-32 702533-14-11-61 702533-08-10-82 702533-12-11-20 702533-13-11-32 702533-13-11-32 702533-14-11-61 702533-14-11-61 702533-19-11-80 702533-21-11-91 702533-13-11-32 702533-14-11-61 702533-12-11-30 702533-14-11-61 702533-19-11-80 702533-21-11-91 702533-12-11-50 702533-19-12 702533-21-11-91 702533-25-12-60 702533-12-11-50 702533-14-11-81 702533-21-12-32 702533-25-12-60 707902 7 09446 644970-01-00-01 702533-19-12-00 702533-19-12-00 702533-19-12-00 707902 7 09446 7 09446 702533-11-11-50 702533-13-11-70 702533-14-11-80 702533-19-12-12

†Studs are hydraulical ly tensioned. Contact Cameron for details. *4 required.

53

Nut Part No. (8 Reqd) 2709000-09-01 2709000-09-01 2709000-10-01 2709000-09-01 2709000-09-01 2709000-10-01 2709000-10-01 2709000-09-01 2709000-10-01 2709000-10-01 12955-53-10 2709000-10-01 2709000-10-01 12955-53-10 2709000-14-01 2709000-10-01 12955-53-10 2709000-14-01 2709000-15-01 2709000-09-01 2709000-13-01 2709000-14-01 2709000-14-01 2709000-15-01 2709000-15-01 2709000-19-01 2709000-20-01 2709000-14-01 2709000-15-01 2709000-13-01 2709000-15-01 2709000-19-01 2709000-20-01 2709000-13-01 2709000-19-01 2709000-20-01 49800-11 2709000-13-01 2709000-15-01 2709000-20-01 49800-11 713034 644076-01 645015-01 2709000-19-01 2709000-19-01 2709000-19-01 713034 644076-01 644076-01 2709000-12-01 2709000-14-01 2709000-15-01 2709000-19-01

Load Ring Part No. (8 Reqd)

Safety Hoist

Bearing Ring Part No. (8 Reqd)

697491-05 697492-05 697491-05 697492-05 697491-06 697492-06 697491-05 697492-05 697491-05 697492-05 697491-06 697492-06 697491-06 697492-06 697491-05 697492-05 697491-06 697492-06 697491-06 697492-06 697491- 07 697492-07 697491-06 697492-06 697491-06 697492-06 697491-07 697492-07 697491-10 697492-10 697491-06 697492-06 697491-07 697492-07 697491-10 697492-10 697491-11 697492-11 697491-05 697492-05 697491-09 697492-09 697491-10 697492-10 697491-10 697492-10 697491-11 697492-11 697491-11 697492-11 697491-12 697492-12 697491-04 697492-04 697491-10 697492-10 697491-11 697492-11 697491-09 697492-09 697491-11 697492-11 697491-12 697492-12 697491-04 697492-04 697491-09 697492-09 697491-12 697492-12 697491-04 697492-04 697491-01 697492-01 697491-09 697492-09 697491-11 697492-11 697491-04 697492-04 697491-01 697492-01 697491-03 697492-03 697491-02 697492-02 697491-14* 697492-14* 697491-12 697492-12 697491-12 697492-12 697491-12 697492-12 697491-03 697492-03 697491-02 697492-02 697491-02 697492-02 697491-08 697492-08 697491-10 697492-10 697491-11 697492-11 697491-12 697492-12

             

           

2 Reqd __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __

4** or 6*** Reqd __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ 708153*** __ __ __ __

708153*** 708153*** 708152 708153** 708152 708153**   __ __ __ 708153*** __ 708153*** __ 708153*** 708152 708153** 708152 708153** __ 708153*** 708152 708153** 708152 708153** __ 708152*** __ 708153*** __ 708153*** 708152 708153** __ 708152*** __ 708152*** __ 708152*** __ 708152*** 708152 708153** 708152 708153** 708152 708153** __ 708152*** __ 708152*** __ 708152*** __ 708153*** __ 708152*** __ 708152*** __ 708152***

Cameron Wrench Part No. 713114-01 713114-01 713114-04 713114-01 713114-01 713114-04 713114-04 713114-01 713114-04 713114-04 713114-05 713114-04 713114-04 713114-05 713114-08 713114-04 713114-05 713114-08 713114-09 713114-01 713114-07 713114-08 713114-08 713114-09 713114-09 713114-13 713114-14 713114-08 713114-09 713114-07 713114-09 713114-13 713114-14 713114-07 713114-13 713114-14 __ 713114-07 713114-09 713114-14 __ __ __ __ 713114-13 713114-13 713114-13 __ __ __ 713114-06 713114-08 713114-09 713114-13

Manufacturing and Aftermarket Facilities WESTERN HEMISPHERE Canada Cooper Cameron Corporation Cooper Cameron Ltd. 5003 93rd Street Edmonton, Alberta T6E 5S9 Canada Tel: (403) 434-3476 Fax: (403) 437-7397 Mexico Cooper Cameron de Mexico, S.A. de C.V. P.O. Box MEB-MX17-390 Veracruz, Ver. Mexico C.P, 91707 Tel: 011+ 522+981-1008 Fax: 011+ 522+981-1009 South America Cameron Argentina S.A.I.C. Av. Antartida Argentina 2711 2800 Zarate Pica., Buenos Aires Repulica Argentina Tel: 011+54+487+22297 Fax: 011+54+487+23404 United States Cameron 600 East 57th Place Anchorage, Alaska 99518-5761 Tel: (907) 562-2332 Fax: (907) 562-3880 Cameron P.O. Box 457 Berwick, Louisiana 70392 Tel: (504) 395-6171 Fax: 504) 395-9350 Cameron P.O. Box 457 Highway 90 East Patterson, Louisiana 70392 Tel: (504) 395-6171 Fax: (504) 395-1297 Cameron No. 6 Holloway Blvd. Ville Platte, Louisiana 70586-9778 Tel: (318) 363-7500 Fax: (318) 363-7516

Cameron 4341 S.W. 33rd Street Oklahoma City, Oklahoma 73119 Tel: (405) 682-1661 Fax: (405) 682-1051

Germany Cameron GmbH P.O. Box 3225 29232 Celle, Germany Tel: 011+49+5141+8060 Fax: 011+49+5141+806333 Ireland Cameron Ireland Limited Aghafad, Longford Republic of Ireland Tel: 011+353+43+45301 Fax: 011+353+43+41560

Cameron Elastomer Technology 29501 Katy Freeway Katy, Texas 77450 Tel: (281) 391-4600 Fax: (281) 391-4640

Nigeria Cooper Cameron Corp. Nigeria Plot 45 Trans Amadi Ind. Layout P.M.B. 995 Port Harcourt, Nigeria Tel: 011+234+84+331264 Fax: 011+2341-2694003

Cameron P.O. Box 10286 Highway 90 @ FM 1909 Liberty, Texas 77575 Tel: (409) 336-8811 Fax: (409) 336-2822

EASTERN HEMISPHERE Austria Canada Works Dorenkampgasse 3 P.O. B. 24 A-1107 Vienna, Austria Tel: 011+43+1+682-131 Fax: 011+43+1+682-133; England Cooper Cameron (U.K.) Ltd. Queen Street, Stourton Leeds, West Yorkshire LS10 1SB England Tel: 011+44+113+2701144 Fax: 011+44+113+7276778 France Cameron France, S.A. Plaine Saint-Pierre CS 620 34535 Beziers Cedex, Beziers, France Tel: 011+33+67+111500 Fax: 011+33+67+111600

Cooper Cameron Corp. Nigeria Ogunu Road P.M.B. 1066 Warri, Nigeria Tel: 011+871+685052494 Fax: 011+871+6850524946 Norway Cameron Norway A/S P.O. Box 66 5364 Agotnes Bergen, Norway Tel: 011+47+55+334710 Fax: 011+47+5+334593 Cameron Norway A/S Mekjarvik 1 4070 Randaberg Stavanger, Norway Tel: 011+47+51+415000 Fax: 011+47+51+418160 Scotland Cameron (Great Britain) Ltd. Badentoy Industrial Park Badentoy Avenue Portlethen, Aberdeen AB1 4YB Scotland Tel: 011+44+1224+282000 Fax: 011+44+1224+781800

Gabon Cameron Gabon S.A. B.P. No. 869 Port Gentil Republique Gabonaise Tel: 011+241+553026 Fax: 011+241+555897

54

The Netherlands Cameron B.V. P.O. Box 121, 9600 AC Produktieweg 14, 9601 MA Hoogezand, The Netherlands Tel: 011+31+598+396200 Fax: 011+31+598+396298

ASIA PACIFIC/MIDDLE EAST Australia Cameron Australia Pty. Ltd. P.O. Box 519 Cheltenham 3192 Melbourne, Victoria, Australia Tel: 011+61+39+584-3100 Fax: 011+61+39+584-6658 Cameron Australia Pty. Ltd. P.O. Box 1475 Canning Vale 6155 Perth Western Australia 6155 Tel: 011+61+9+455-3655 Fax: 011+61+9+455-3636 Singapore Cameron (Singapore) Pte. Ltd. No. 2 Gul Circle Jurong Industrial Estate Locked Bag Service No. 3 Jurong Town Post Office Singapore 2262 Republic of Singapore Tel: 011+65+861-335 Fax: 011+65+861-6197

Sales Offices WESTERN HEMISPHERE Canada Cooper Cameron Corporation Cooper Cameron Ltd. 600, 715 - 5th Avenue S.W. Calgary, Alberta T2P 2X6 Canada Tel: (403) 261-2800 Fax: (403) 262-5181 Cooper Cameron Corporation Cooper Cameron Ltd. 8614 112 Street Grande Prairie, Alberta T8V 5X4 Canada Tel: (403) 539-2333 Fax: (403) 539-2334 Mexico Cooper Cameron de Mexico, S.A. de C.V. Calle 37 No. 147-A Col. Hector Perez Martinez 24100 Ciudad Del Carmen Camp Mexico Tel: 011+ 52+938-27924 Fax: 011+ 52+938-27924 Cooper Cameron de Mexico, S.A. de C.V. Avenida Homero 1804, Ste 403 Co. Chapultec Morales 11510 Mexico D.F. Tel: 011+52+5+5800296 Fax: 011+52+5+395-8869 Cooper Cameron de Mexico, S.A. de C.V. Paseo Villahermosa 701-37 Seccion Lomas Fracc. Plaza Villahermosa 86179 Villahermosa, Tabasco Mexico Tel: 011+52+93-513484 Fax: 011+52+93-513484 South America Cameron Argentina Cerrito 1070, Piso 2 1010 Buenos Aires, Argentina Tel: 011+54+811+4000 Fax: 011+54+811+4009

Cameron Balfer Ltd. Zona Franca P.O. Box 117-D Punta Arenas, Chile Tel: 011+56+61+213931 Fax: 011+56+61+214379

Cameron P.O. Box 114 Mt. Pleasant, Michigan 48858 Tel: (517) 772-5555 Fax: (517) 773-2842 Cameron 1020 Hillcrest Drive Laurel, Mississippi 39440 Tel: (601) 649-8900 Fax: (601) 649-8909

Cameron Venezolana S.A. Apartado 1467 Maracaibo, Venezuela 4001-A Tel: 011+58+61+347231 Fax: 011+58+61+349559

Cameron 5729 Leopard Street, Bldg. 9 Corpus Christi, Texas 78408 Tel: (512) 289-1455 Fax: (512) 289-6251

Ingram Cactus Ltd. C/o Lifkin De Venezuela S.A. Carret A. Perija KM 15 Maracaibo, Venezuela Tel: 011+58+62+47001 Fax: 011+58+61+360087

Cameron 1505 Elm Street, Suite 950 Dallas, Texas 75201 Tel: (214) 855-7823 Fax: (214) 855-0033

United States Cameron P.O. Box 3545 Bakersfield, California 93385 Tel: (805) 323-8297/8183 Fax: (805) 323-8595

Cameron P.O. Box 1212 Houston, Texas 77251-1212 Tel: (713) 939-2211 Fax: (713) 939-2620

Cameron 1238 Alice Street, A Woodland, California 95695 Tel: (916) 666-4144 Fax: (916) 666-5916 Cameron 1700 Broadway, Suite 1400 Denver, Colorado 80290-1401 Tel: (303) 861-1850 Fax: (303) 837-0408 Cameron 201 Energy Center Parkway, Suite 402 Lafayette, Louisiana 70508 Tel: (318) 235-0051 Fax: (318) 233-8659 (sales) (318) 981-3322 (service) Cameron 650 Poydras St. Poydras Center, Suite 2310 New Orleans, Louisiana 70130 Tel: (504) 529-7634 Fax: (504) 522-8837

55

Cameron P.O. Box 1311 Longview, Texas 75606 Tel: (903) 236-4884 Fax: (903) 234-0336 Cameron 415 W. Wall, Suite 102 Midland, Texas 79702 Tel: (915) 682-4688 Fax: (915) 682-4692 Cameron 270 So. Grandview Odessa, Texas 79761 Tel: (915) 337-5475 Fax: (915) 337-3001 Cameron P.O. Box 2229 Mills, Wyoming 82644 Tel: (307) 472-0222 Fax: (307) 265-1318

Cameron P.O. Box 901 Evanston, Wyoming 82931-0901 Tel: (307) 789-2665 Fax: (307) 789-4734 Cameron 240 Industrial Boulevard Rock Springs, Wyoming 82901 Tel: (307) 382-3134 Fax: (307) 382-3190 Cameron P.O. Box 1463 1336 East 335 South Vernal Utah 84078 Tel: (8091) 789-1778 Fax: (801) 789-1739

EASTERN HEMISPHERE Congo Cameron France Antenne de Point-Noire B.P. 5491 Cote Sauvage Pointe-Noire Congo Tel: 011+242+945563 Fax: 011+242 +940283 Egypt Cameron Villa El Baraka No. 8 Road 279 New Maadi Cairo, Egypt ARE Tel: 011+202+352-0193 Fax: 011+202+352-0495 England Cooper Cameron (U.K.) Ltd. Unit 11, Brinell Way Harfrey’s Industrial Estate Great Yarmouth, Norfolk NR31 OLU England Tel: 011+44+1493+440438 Fax: 011+44+493+655405 Ingram Cactus Ltd. Shuttleworth Close Gapton Hall Industrial Estate Great Yarmouth Norfolk NR31 ONQ England Tel: 011+44+1493+440444 Fax: 011+44+493+440254

Sales Offices Cooper Cameron (U.K.) Ltd. 205 Holland Park Avenue London W11 4XB England Tel: 011+44+171+602-0888 Fax: 011+44+171+602-7228 Ingram Cactus Ltd. Plexzus House 1 Cromwell Place London SW72JE England Tel: 011+44+171+225-2281 Fax: 011+44+171+225-2181 France Cameron France, S.A. 19 bis, Blvd. d’Argenson 92200 Neuilly-Sur-Seine Paris, France Tel: 011+33+1+4643-9200 Fax: 011+33+1+4643-9202 Cameron France, S.A. 15, Ave du General De Gaulle 64000 Pau, France Tel: 011+33+59+807640 Fax: 011+33+59+807649 Gabon Cameron Gabon S.A. B.P. No. 869 Port Gentil Republique Gabonaise Tel: 011+241+553026 Fax: 011+241+555897 Nigeria Cooper Cameron Corp. Nigeria 18B Thompson Avenue Ikoyi Lagos, Nigeria Tel: 011+2341-2694003 Fax: 011+2341-2694003 Russia Cooper Cameron Corporation Per. Sadovskikh, 4 Apt. 12 Moscow 103001, Russia Tel: 011+7+502+221-3422 Fax: 011+7+502+221-3010

Scotland Ingram Cactus Ltd. Wellheads Crescent Dyce Industrial Park Dyce AB2 OGA Aberdeen, Scotland Tel: 011+44+1224+724226 Fax: 011+44+1224+7242

Malaysia Cameron Excel Sdn Bhd Warehouse 11 Kemaman Supply Base 24007 Kemaman Terengganu, Malaysia Tel: 011+60+9+86311198 Fax: 011+60+9+8631196

Qatar Cameron c/o AlAhed Trading and Construction Co. Ltd. P.P. Box 3266 Doha, Qatar Tel: 011+974+410797 Fax: 011+974+411582

The Netherlands Cameron B.V. Sweelinckplein 11 2517 GK The Hague, The Netherlands Tel: 011+31+70+365-7904 Fax: 011+31+70+364-5941

Cameron Excel Sdn Bhd 20.04, 20th Floor Menara Promet Jalan Sultan Ismail 50250 Kuala Lumpur, Malaysia Tel: 011+60+3+241+6933 Fax: 011+60+3+241+8922

Saudi Arabia Cameron c/o Al Rushaid Trading Co. P.O. Box 540 Dhahran Airport 31932 Al Khobar Saudi Arabia Tel: 011+966+3+898-0028 Fax: 011+966+3+894-6426

ASIA PACIFIC

Cameron Excel Sdn Bhd Lot 2244 Pujut 6 1/2 JLN Pujut.Lutong Road 9800 Miri Sarawak East, Malaysia Tel: 011+60+85+657335 Fax: 011+60+85+656335

Indonesia Cameron (Singapore) Pte. Ltd. c/o P.T. Imeco Jalan Ampera Raya No. 9 & 10 Cilandak Timur Jakarta #12550 Indonesia Tel: 011+62+21+780-8090 Fax: 011+62+21+780-8064 Japan Cameron/CCV Fuundo Annex Bldg., 3rd Floor 4-2, Kanda Ogawa-Machi 1-Chome Chiyoda-Ku Tokyo 101 Japan Tel: 011+81+3+3252-8434 Fax: 011+81++3+32525438 New Zealand Cameron P.O. Box 672 Papakura, New Zealand Tel: 011+64+9+299-8103 Fax: 011+64+9+299-8103

Cameron Excel Sdn Bhd C-O 2MC Asian Supply Base Ranca Ranca Industries Lubuan Federal Territory Malaysia Tel: 011+60+87+413914 Fax: 011+60+87+415921 Ingram Cactus (Malaysia) Sdn. Bhd. P.O. Box 7170 40706 Shah Alam Selangor Darul Ehsan Malaysia Tel: 011+60+3+550-8850 Fax: 011+60+3+550-4772 Oman Cooper Cameron Corporation c/o Oman United Agencies LLC P.O. Box 985 Postal Code 112 Muscat 112 Sultanate of Oman Tel: 011+968+591608 Fax: 011+968+593980

MIDDLE EAST Brunei Cameron Sdn. Bhjd. c/o Syarikat Rajah Sdn Bhd P.O. Box 177 Kuala Belait 6001 Negara Brunei Darussalam Tel: 011+673+3+222613 Fax: 011+673+3+224284

56

UAE Cameron P.O. Box 3555 Abu Dhabi, U.A.E. Tel: 011+971+2+541313 Fax: 011+971+2+541441 Ingram Cactus Ltd. P.Ol. Box 43966 Abu Dhabi, U.A.E. Tel: 011+971+2+723648 Fax: 011+971+2+782293

CAMERON AND COOPER CAMERON VALVES TERMS AND CONDITIONS OF SALE 1. CONTRACT ACCEPTANCE:

Any written or oral purchase order received from Buyer by Cooper Cameron Corporation, Cameron Division and Cooper Cameron Valves (“Seller”) shall be construed as a written acceptance of Seller’s offer to sell and shall be filled in accordance with the terms and conditions of sale set forth herein. SELLER’S ACCEPTANCE OF THIS ORDER IS EXPRESSLY CONDITIONED ON BUYER’S ASSENT TO THE TERMS CONTAINED HEREIN. The terms and conditions of Seller’s proposal (if any) and acknowledgement shall prevail over any conflicting or different terms in Buyer’s order unless Buyer notifies Seller in writing of its objections thereto within fifteen (15) days from receipt of Seller’s acknowledgement. Buyer’s standard terms of purchase will not be considered a counteroffer to Seller’s terms and conditions of sale. The failure of Seller to object to any provision in conflict herewith whether contained on Buyer’s purchase order or otherwise shall not be construed as a waiver of the provisions hereof nor as an acceptance thereof. 2. QUOTATIONS AND PRICES:

All quotations are made for prompt acceptance and any terms quoted therein are subject to change without notice after thirty (30) days from the date quoted unless specifically stated otherwise on the quotation. Any product, service capability or manufacturing capability which may be available at the time a quotation is made is subject to prior sale. Prices quoted are valid for thirty (30) days unless specifically stated otherwise on the quotation and are subject to change without notice. The price in effect at the time of shipment including any escalation formula will apply, unless a valid quotation or written agreement to the contrary exists between Buyer and Seller. All prices shown are in U.S. dollars and are F.O.B. Seller s shipping point. Any documentation pertaining to traceability requirements for raw materials or products or documentation required for any routine or special processes must be identified by the Buyer at the time of quotation (if any) or at the time of order placement. 3. TAXES:

its option and its own expense, to answer such claim or threat of suit, assume the control of the defense of said suit, and settle or compromise same in any way Seller sees fit. Other than court-awarded judgments as aforesaid Seller shall not be liable for any delays, loss of use or for other direct, indirect, incidental or consequential damages incurred by reason of any such judgment. Seller does not warrant that such material or apparatus (a) will not infringe any such patent when not manufactured by or for Seller or when specially made in whole or in part to the Buyer’s design specification and such infringement arises from the inclusion of such specified design or (b), if used or sold in combination with other material or apparatus, or if used in the practice of a process, will not, as a result of such combination or use, infringe any patent covering such combination or process; and Seller shall not be liable for and does not indemnify Buyer for damages or losses of any nature whatsoever resulting from actual or alleged patent infringement arising pursuant to (a) or (b) above. 11. SELLER’S RIGHT TO MANUFACTURE:

Seller in its sole discretion shall have the right to manufacture the products provided hereunder as far in advance of its estimated shipping schedule as it deems appropriate. Seller expressly reserves the right to change or modify the design and construction of any product in due course of Seller’s manufacturing procedure without incurring any obligation or liability to furnish or install such changes, modifications or improvements to products previously or subsequently sold. 12. ENGINEERING AND SERVICE:

Upon request, Seller will provide engineering and/or technical information regarding its products and their uses and, if feasible, will provide personnel to assist Buyer in effecting field installations and/or field service. Any such information, service or assistance so provided, whether with or without charge, shall be advisory only. In that regard, neither Seller nor Buyer assumes any liability for the acts or omissions of the other party except as may be provided in these terms.

Any tax or other charge imposed by law on the sale or production of goods or the performance of services shall be paid by the Buyer, unless the law specifically provides that such payment must be made by Seller, in which case Buyer shall reimburse Seller for such payment as part of the purchase price. Custom duties, consular fees, insurance charges and other comparable charges will be borne by Buyer.

13. LABOR STANDARDS:

4. SHIPPING SCHEDULE AND DELIVERY:

14. INSPECTION:

Shipment schedules are given as accurately as conditions permit and every effort will be made to make shipments as scheduled. Seller will not be responsible for deviations in meeting shipping schedules nor for any losses or damages to Buyer (or any third party) occasioned by deviations in the shipping schedule, whether due to Acts of God, orders bearing priority ratings established pursuant to law, differences with workmen, local labor shortages, fire, flood, shortages or failure of raw materials, supplies, fuel, power or transportation, breakdown of equipment or any other causes beyond Seller’s reasonable control, whether of similar or dissimilar nature than those enumerated. Seller shall have additional time within which to perform as may be reasonably necessary under the circumstances and shall have the right to apportion its production among its customers in such a manner as it may consider to be equitable. Seller reserves the right to furnish commercially equivalent or better substitutes for materials or to subcontract the Buyer’s order or portions thereof as Seller deems necessary. In no event shall Seller be liable for any consequential damages for labor resulting from failure or delay in shipment. If Buyer requires drawings, procedures, standards or similar material for approval, shipping schedules will be calculated from the time such approvals are received by Seller, since shipping schedules are based on Seller having all required information and a firm order from Buyer which is enterable into production. Any hold points, witness points or the need for inspection by Buyer’s representatives must be identified by Buyer at the time of quotation (if any) and/or order placement in order that the effect on the prices or shipping schedules (if any) can be taken into account. Additional inspection or testing required by Buyer which affects normal production sequence will be considered as extending the shipping dates accordingly.

Unless otherwise agreed in writing, final inspection and acceptance of products must be made at Seller’s plant or other shipping or receiving point designated by Seller and shall be conclusive except as regards latent defects. Buyer’s representatives may inspect at the Seller’s plant or shipping point during working hours prior to shipment in such manner as will not interfere with operations.

5. MINIMUM BILLING:

Seller reserves the right to impose a minimum billing charge on all sales, change orders or order supplements. 6. TERMS OF PAYMENT:

Terms of payment for all materials and service are 30 days from invoice date, at net price, provided satisfactory credit has been established. All unpaid invoices are subject to the maximum legal interest rate per annum commencing with the due date. 7. CANCELLATIONS AND RETURNS:

Purchase orders once placed by Buyer and accepted by Seller can be canceled only with Seller’s written consent and upon terms which will save Seller from loss. No products may be returned for credit or adjustment without written permission from Seller’s office authorized to issue such permission. 8. WARRANTIES:

All products of Seller’s manufacture are warranted against defects of material and workmanship for a period of twelve (12) months from the date of installation or eighteen (18) months from date of shipment, whichever period first expires, when such products are used in the service and within the pressure range for which they were manufactured. In the case of products or parts not wholly of Seller’s manufacture, Seller’s liability shall be limited to the extent of its recovery from the manufacturer of such products or parts under its liability to Seller. Any repair work performed by Seller is warranted for one year from completion of such repairs and applies only to work performed. If, within these specified periods, Seller receives notice from Buyer of any alleged defect in or nonconformance of any product or repair and if in the Seller’s sole judgment the product or repair does not conform or is found to be defective in material or workmanship, then, Buyer shall, at Seller’s request, return the part or product F.O.B. to Seller’s designated plant or service location. Seller, at its option and expense, shall repair or replace the defective part or product, or repay to Buyer the full price paid by Buyer for such defective part, repair or product. Any repayment of purchase price shall be without interest. Seller’s warranty liability, including defects caused by Seller’s negligence, shall be limited to such repair, replacement or refund, and shall not include claims for labor costs, expenses of Buyer resulting from such defects, recovery under general tort law or strict liability or for damages resulting from delays, loss of use, or other direct, indirect, incidental or consequential damages of any kind. Seller will not be responsible for failures of products which have been in any way tampered with or altered by anyone other than an authorized representative of Seller, failures due to lack of compliance with recommended maintenance procedures or products which have been repaired or altered in such a way (in Seller s judgment) as to affect the products adversely. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS, STATUTORY OR IMPLIED, INCLUDING THE WARRANTY OF MERCHANTABILITY AND FITNESS FOR PARTICULAR PURPOSE WHICH EXCEED THE FOREGOING WARRANTY. 9. NUCLEAR SALES:

The products sold hereunder are not designed or manufactured for use in or with any atomic installation or activity. If the Buyer or ultimate user of these products intends to use them in such an installation or activity, Seller’s Nuclear Terms of Sale shall be part of and control this contract. Seller will fur nish Buyer with a copy of its Nuclear Terms of Sale upon request. 10. PATENT INFRINGEMENT:

Seller warrants that the use or sale of material or apparatus sold or rented by it to Buyer hereunder will not infringe United States’ patents of others covering such material or apparatus by itself, and hereby agrees to indemnify Buyer against judgment for damages for such infringement of any such patent, provided that Buyer shall, upon receipt of any claim for infringement of any such patent or threat of suit for such infringement or upon the filing of any suit for infringement, whichever comes first, promptly notify Seller in writing and afford Seller full opportunity, at CAM/T&C/US/96 REV. 2/96

Seller hereby certifies that these products were produced in accordance with all applicable requirements of Section 6, 7 and 12 of the Fair Labor Standards Act as amended and of regulations and orders of the United States Department of Labor issued under Section 14 thereof.

15. TITLE:

Title to the products sold hereunder passes to Buyer upon payment of the full purchase price. 16. TRANSPORTATION CHARGES, ALLOWANCES, CLAIMS:

All prices are F.O.B. Seller’s plant or other designated shipping point. No freight is allowed unless stated in Seller’s quotation (if any) or in a written contract which may exist between Seller and Buyer at the time of shipment. If Seller’s quotation or a written contract states that all or a portion of freight is allowed, all prices are F.O B. Seller’s plant or other designated shipping point, with most economical surface transportation allowed. If the quoted or contractual price includes transportation, Seller reserves the right to designate the common carrier and to ship in the manner it deems most economical. Added costs due to special routing requested by the Buyer are chargeable to the Buyer. Under no circumstances is any freight allowance which is absorbed by Seller to be deducted from the selling price. If the quoted price or contract includes transportation, no deduction will be made in lieu thereof whether Buyer accepts shipment at plant, warehouse, freight station, or otherwise supplies its own transportation. When sales are made from the Seller’s warehouse, Seller reserves the right to charge either actual or pro-rated freight from Seller’s principle point of manufacture to Seller’s warehouse. Buyer assumes risk of loss upon delivery to the carrier, regardless of who pays shipping costs. Seller endeavors to pack or prepare all shipments so that they will not break, rust or deteriorate in transit, but does not guarantee against such damage. Unless requested in writing by the Buyer, no shipments are insured by Seller against damage or loss in transit. Seller will place insurance as nearly as possible in accordance with Buyer’s written instructions but in such case Seller acts only as agent between the insurance company and the Buyer and assumes no liability whatsoever. Any claims for shipping loss, breakage or damage (obvious or concealed) are Buyer’s responsibility and should be made to the carrier. All claims regarding shortages must be made within thirty (30) days from receipt of shipment and must be accompanied by the packing list(s) covering the shipment. 17. CONSULAR INVO ICES:

Consular fees for legalizing invoices, stamping bills of lading, or other documents required by the laws of any country or destination are not included in quotations or selling prices. If instructed in writing, Seller will make arrangements for consular documents and declarations as agent of the Buyer, but Seller assumes no liability whatsoever as a result of making such arrangements. Seller assumes no responsibility for any fines or other charges imposed due to errors or incorrect declarations. 18. INDEMNIFICATION AND LIMITATION OF LIABILITY: A. INDEMNIFICATION:

Seller agrees to indemnify Buyer and hold Buyer harmless against any claims, demands or causes of action for property damage or personal injury (including death) caused by the negligent act or omission of any employee, agent or subcontractor of Seller and not contributed to by the negligence of Buyer, its employees, its agents or any third party. Seller shall not be responsible for the acts and workmanship of employees, agents, contractors or subcontractors of Buyer or any third party, nor for failure or malfunction of any tools, materials, equipment, products, supplies, facilities or devices not manufactured and supplied by Seller. Buyer agrees to hold Seller harmless from any and all losses, claims, or damages arising from subsurface damage, surface damage caused by subsurface damage, loss of hydrocarbons and from pollution, regardless of whether such damages, losses or claims were caused by the negligence or sole negligence of Seller, it being the intent of the parties that this indemnity shall apply to property of Buyer or to that of any third party. B. LIMITATION OF LIABILITY: UNDER NO CIRCUMSTANCES SHALL SELLER BE LIABLE FOR ANY SPECIAL, CONSEQUENTIAL OR INCIDENTAL DAMAGES, INCLUDING, BUT NOT LIMITED TO LOSS OF ANTICIPATED PROFITS, LOSS OF USE OF EQUIPMENT OR OF ANY INSTALLATION, SYSTEM OR FACILITY INTO WHICH SELLER’S EQUIPMENT MAY BE LOCATED OR AT WHICH SELLER, ITS AGENT OR SUBCONTRACTOR MAY BE PERFORMING WORK. Seller’s total responsibility for any claims, damages, losses or liabilities arising out of or related to its performance of this contract or the products or services covered hereunder shall not exceed the purchase price. 19. MODIFICATION, RESCISSION & WAIVER:

The terms herein may not be modified or rescinded nor any of its provisions waived unless such modification, rescission or waiver is in writing and signed by an authorized employee of Seller at its office in Houston, Texas. Failure of Seller to insist in any one or more instances upon the performance of any of the terms and conditions of the contract or the failure of Seller to exercise any of its rights hereunder shall not be construed as a waiver or relinquishment of any such term, condition, or right hereunder and shall not affect Seller’s right to insist upon strict performance and compliance with regard to any unexecuted portions of this contract or future performance of these terms and conditions. All orders must be accepted by an authorized employee of Seller. The rights and duties of the parties and construction and effect of all provisions hereof shall be governed by and construed according to the internal laws of the State of Texas. Any disputes which arise under this agreement shall be venued in the District Court of Harris County, Texas or in the Southern District of Texas. CAM-523-F